Blockers addressed together (shared scanner/delete-plan plumbing):
* #10: an empty in-scope source directory produced no plan keep entry, so the
receiver deleted the destination directory itself. The scanner now records
every traversed directory into a delete-plan sink, the plan sender keeps them,
and any directory whose plan the data stream never triggered is emitted after
the data so its extras are still removed. Differential tests cover
--delete-during and --delete-delay.
* #8: an invalid per-directory filter file was silently ignored when an earlier
merge file in the same directory existed; key the failure off the error text
(both sequential and parallel scanners) and fail the scan.
* #9: -R + --files-from receiver-protect rules recorded the source-relative
path; record the bare relative wire path in both scanners so the protected
destination mirror survives --delete.
* #5: the STATUS_STATS would-delete parser now validates each retained path and
enforces the shared MAX_MANIFEST_BYTES budget, and the --out-format dry-run
delete line is escaped like the itemize line.
* #11: drop the unused DELETE_PLAN_MAX_NAMES macro, log the delete-limit
warning once per session, roll back dir-merge names from a per-directory file
that fails to parse, and guard every filter error snprintf against err==NULL.
#10 leaves the empty directory itself kept and its extras removed, matching
rsync's final state on both per-directory timings.
Reconstruct the destination-relative prefix from the source spec outside
--files-from: cut at rsync's first '/./' (or a leading './'), normalize
later '.' components and trailing slashes. Apply it as each File's
send_path in the sequential and parallel scanners (root and worker paths,
files, one-file-system mount entries and directory-time capture).
Transmit the metadata of implied parent directories (prefix components
above the source root), suppressed by --no-implied-dirs, so parent attrs
match rsync in both the single-threaded and -m pipelines.
- Scope the --delete extras walk to directories synchronized by the
transfer: add a synchronized-directory section to the delete manifest
(protocol 2.23.0) so --files-from subsets no longer delete untransmitted
paths outside listed directory subtrees (data-loss fix).
- Separate --max-size/--min-size prune protection from --delete-excluded so
size-pruned source mirrors survive (rsync parity).
- Unlink extraneous destination symlinks instead of skipping them.
- Make --max-delete partial (delete up to N, skip the rest) and exit 25;
accept negative values as unlimited.
- Draw --delete-missing-args deletions from the shared --max-delete budget.
- Honor --force during --delay-updates publication.
Add unit and integration regression tests; update the pinned config wire
golden and version strings for the 2.23.0 manifest/status additions.
#291:
- Compile --exclude/--include/--exclude-from/--include-from into the SAME
ordered rule list as --filter/-f (first match wins), so the common
`--include='*.txt' --exclude='*'` idiom and include-alone semantics match
rsync. The legacy per-kind scanner arrays are no longer applied.
- -x/--one-file-system emits the cross-device mount-point directory entry
(empty) instead of dropping it, in both the sequential and parallel scanners.
- Stop passing the legacy arrays to the scanner; document -f is --filter.
#292:
- New src/shared/format.c/.h: rsync "big_num" (comma-grouped integers) and
decimal -h human sizes, %M/%t timestamp, and the STATUS_DEST_INFO codec.
- Receiver answers each STATUS_CHECK with a pre-transfer destination snapshot
(new report_dest_info wire field + STATUS_DEST_INFO, PROTOCOL_VERSION
2.23.0) so the sender can render true itemize columns.
- Itemize now emits rsync-correct update/type chars and c/s/t/p/o/g columns
for files, dirs, symlinks and hard links, comparing size/time/perms/owner/
group against the reported destination.
- --out-format gains %i %n %f %l %b %M %t %o %p %B %U %G %L; %f is the
relative display path, %M the YYYY/MM/DD-HH:MM:SS form, %b the literal
bytes sent.
- --list-only prints transfer-relative names, directory entries and ls-style
grouped sizes.
- --stats prints rsync's multi-line block on stdout; -h uses decimal units.
Tests: unit tests for the filter ordering, format primitives, itemize
columns; integration + differential tests against real rsync 3.4.1 for
itemize/out-format/list-only/selection and -x. Golden wire len/hash and
protocol version strings updated for 2.23.0.
Review fixes for Phase 7 Wave D.
#1 (HIGH): STATUS_DIR_TIMES entries no longer create directories. A new
receiver-only File.dir_time_only flag marks dir-time entries; file_save_to_disk_full
short-circuits them as FILE_SAVE_SKIPPED before any device/dir branch, so the sink
still accumulates metadata into the deferred DirTimeList but creates nothing. Empty
source dirs stay untransferred (-a), -m/--prune-empty-dirs semantics are preserved,
and a pre-existing regular file/symlink at an empty-dir mirror path no longer aborts
the transfer. dir_time_list_apply fstatat()s the leaf (AT_SYMLINK_NOFOLLOW) and skips
absent/non-directory paths QUIETLY; only a real existing directory is stamped.
Also initialize File.dir_time_only in file_create() (uninitialised garbage otherwise).
#2 (MED): send_dir_times() chunks entries into repeated STATUS_DIR_TIMES frames of at
most MAX_MANIFEST_ENTRIES, matching the receiver's per-frame bound; the tautological
> INT_MAX check is gone.
#3 (LOW): dir_time_list_add() assigns each grown array right after its realloc (no
dangling) and advances capacity only after both succeed.
#4 (LOW): RSYNC_COMPAT.md -- STATUS_MKDIR carries metadata, dir times are transmitted
via STATUS_DIR_TIMES and applied at the end, empty dirs are still never created; -m
rationale, -O row and Wave D notes updated. Summary counts untouched.
#5 (LOW): integration tests for the three #1 scenarios (empty-dir non-creation under
-a and -a -m, collision non-abort), scanner test now covers empty-dir capture, and
test_file_restore_symlink_metadata asserts the positive apply path when supported.
PROTOCOL_VERSION stays 2.17.0; config-frame layout unchanged.
Wave D of Phase 7. Make -O/--omit-dir-times and -J/--omit-link-times real by
preserving directory and symlink times, and mark --secluded-args as an explicit
Impossible/Divergence no-op.
Wire: PROTOCOL_VERSION 2.16.0 -> 2.17.0. Adds a terminal STATUS_DIR_TIMES frame
(int count + (wire path, metadata) pairs) sent after all file data and the
optional delete manifest. STATUS_MKDIR also carries metadata for --dirs entries.
Config-frame layout is unchanged.
Sender: the recursive scanner captures every traversed source directory (both
DirectoryScanner and the parallel scanner root + workers, appends mutex-guarded)
into a shared list; the single-threaded and -m paths transmit it last.
Receiver: a DirTimeList accumulates received directory metadata and applies it
with fd-relative no-follow utimensat only at the very end -- after all children,
after the commit-style --delete, and after --delay-updates publication -- in the
single-threaded success frame and in server.c after the -m threads join. -O skips
the application. Symlink metadata is applied at link creation with
utimensat/fchownat/fchmodat AT_SYMLINK_NOFOLLOW; -J suppresses only link times.
identity_apply_ownership_link shares the identity resolver with the fd path.
Docs: -O/-J rows -> Implemented; --secluded-args -> Impossible/Divergence;
--protocol accepted/rejected values and Phase-6/7 notes updated.
Tests: unit (scanner dir capture, DirTimeList apply, symlink metadata, protocol
version values) and integration (dir mtime round-trip + -O, symlink mtime
round-trip + -J, independent suppression), parameterized over single/multithread.
Capture+transmit source atime (pre-read stat; O_NOATIME sender guard) and birth
time (statx STATX_BTIME); receiver restores atime with mtime (crtime not settable
portably -> transmitted, explicitly not applied). --open-noatime is client-only.
-O/-J documented as accepted no-ops (FastSync never preserves dir/symlink times).
Wire: metadata frame gains atime/crtime val+sec+nsec; PROTOCOL_VERSION
2.11.0->2.12.0. Review fixes: gate atime capture to Linux (no epoch clobber on
non-Linux), close fd on fdopen failure, honest -O/-J status (Compat no-op).
Source files sharing (st_dev,st_ino) are recreated as hard links on the
destination; only the first member's data crosses the wire (siblings ride a
payload-less STATUS_HARDLINK frame). Ordering requires the single-FIFO-writer
receiver + forced sequential scan (documented). link()-failure falls back to a
byte-identical local copy. Rejects -s/--append. PROTOCOL_VERSION 2.11.0->2.12.0.
Review fixes: delete the dead HardLinkRegistry (ordering holds by FIFO writer),
and --existing no longer aborts when the first member is absent but the sibling
exists (leaves the sibling in place).
New flags parse onto the config; --delete-missing-args implies
--ignore-missing-args (order-independent) and does NOT imply --delete (rsync:
independent of other delete processing). The files-from preflight now classifies
listed-but-missing entries instead of hard-failing: under the flags each is
skipped (logged + counted, never silent) and the run succeeds for the rest,
including the all-missing case; an empty list stays a hard error. Under
--delete-missing-args the missing entries' destination mirrors (bare relative
path with -R, full source mirror otherwise) ride the manifest's third section in
both the single-threaded and -m senders; --dirs listed-but-missing entries are
skipped in the scanner.
The scanners now record every entry pruned by user-selection rules
(--filter/-C/per-dir, --exclude/--include, --max-size/--min-size) as a
destination-relative protected path on a caller-supplied sink (thread-safe in
the parallel scanner); --files-from subset pruning and -R relative wire paths
are never recorded. The sender transmits these as manifest protected prefixes,
giving rsync's default --delete behavior (excluded mirrors survive) with
--delete-excluded opting back into deleting them. --ignore-errors makes an
unreadable source directory a recorded, non-fatal scan error: the run continues,
the deletion still runs, and the exit code reports the ignored error.
--prune-empty-dirs omits an empty source directory's explicit --dirs entry.
Empty directories were never transferred by recursive scans (rsync -m parity).
RSYNC_COMPAT Phase-2 row M: path-list construction and destination
directory creation while preserving traversal safety.
- -R/--relative with --files-from: transmit each listed entry under its
bare relative destination path (no source-root mirror). Files keep an
absolute local read path plus a separate wire/dest path (File.send_path);
manifest, incremental quick-check and change output follow the wire path,
so --delete and --remove-source-files stay consistent. -R without
--files-from is unchanged (full mirror).
- --no-implied-dirs: client-only, only meaningful with -R + --files-from.
A listed file whose parent dir is not itself (or via an ancestor)
explicitly listed cannot be placed; the run fails up front with a clear
error. No effect otherwise.
- --dirs/-d + --old-dirs/--old-d aliases: -d <dir> transmits the source
root as an explicit empty directory entry (STATUS_MKDIR frame); with
--files-from listed dirs are created empty and listed files transferred,
never descending. Works single-threaded, -m (sequential scanner in the
-m scan thread) and chunk-serialization (per-file type marker).
Directory entries appear in the delete manifest.
- --mkpath: new wire bool; server creates the destination root (and missing
leading components under its authorized root) at connection start. A
missing destination root is now rejected by default.
- Protocol bumped to 2.7.0 (mkpath wire field + STATUS_MKDIR + chunk type
marker). All receive paths funnel through file_save_to_disk_full which
creates directories via the secure confined mkdir engine; dir entries are
excluded from --remove-source-files outcome acknowledgements on both ends.
- Unit coverage: CLI parse (relative/dirs aliases/mkpath/no-implied-dirs),
config round-trip (relative + mkpath), scanner --dirs non-recursion and
-R send_path (sequential + parallel), receiver dir-entry save.
- Integration coverage: TestRelativeFilesFrom, TestNoImpliedDirs, TestDirs,
TestMkpath (single and -m).
- RSYNC_COMPAT: 4 rows move to Implemented (Summary 67/3/5/1/71 = 147).
Address an independent c-review of the files-from/filter feature:
- .rsync-filter precedence now matches rsync: evaluate the innermost
(current) directory's rules first, then ancestors, then the command-line
base (--filter/-C), so a deeper file's '+' can re-include what a shallower
'-' excluded (regression tests in both scan modes; single-thread and -m).
- --files-from: a listed entry missing on disk and an empty list are now hard
errors surfaced pre-transfer in send_files, send_files_multithreaded,
dry-run and --list-only; '.' (whole tree) and empty listed dirs stay valid.
- scanner_path_relative now handles a transfer root of / (previously the
scanner aborted on children of /).
- Reject unsupported rsync filter syntax explicitly (no silent no-ops):
+/- modifiers other than '/' (! C s r p x) and rules beginning with ':'/'.'
/'!' (merge/dir-merge/list-clear shorthands). Docs updated.
- -0/--from0 NUL mode preserves entry bytes (no CR/LF trimming); only newline
mode trims. Absolute-entry error message no longer includes the newline.
- --no-from0/--no-cvs-exclude registered as negatable booleans.
- RSYNC_COMPAT rows updated for the precedence, rejection list, NUL-mode
detail and the documented O(entries x files) scalability bound of the
allow-set (Summary unchanged: 62/3/5/1/76 = 147).
Implement the RSYNC_COMPAT Phase-2 filter/parser feature group:
- --files-from=FILE (repeatable) plus -0/--from0 NUL delimiters: parse the
source file list relative to the source root into a shared read-only
allow-set; the scanner transfers listed files and the whole subtree of
listed directories and prunes everything else in single- and
multithreaded mode. Absolute/'..' entries and missing files are hard
CLI errors.
- --filter=RULE: rsync-style +/- rules (anchored '/', dir-only trailing '/',
word include/exclude forms) evaluated first-match-wins with a default of
include, as an independent layer from legacy --exclude/--include.
Unsupported directives (merge/hide/... ) are rejected explicitly. -f stays
sendfile.
- -C/--cvs-exclude: well-known rsync CVS default exclude set.
- -F: per-directory .rsync-filter files read during traversal and applied to
the owning directory's subtree (single + parallel), never transferred.
- Delete manifest still derives from what was actually sent.
Client-only config fields; no wire/protocol change. Adds unit coverage
(CLI parse, allow-set and filter scanning single+parallel) and integration
tests (TestFilesFrom, TestFilters). RSYNC_COMPAT matrix rows updated:
5 rows move to Implemented (Summary 62/3/5/1/76 = 147).
Capture the transfer root's device (st_dev) at scanner creation and skip
descending into any subdirectory on a different device (a mount point).
Implemented sender/client-side only: sequential BFS and parallel (-m) root
scan apply the same scanner_same_filesystem decision; no wire/protocol change
and default behavior is unchanged. Unit tests cover the pure decision, same
device scanning in both modes, and CLI parsing; integration tests prove -x
leaves a single-filesystem tree byte-identical and, when root can mount a
tmpfs, skips a genuine cross-device subtree.
- Reformat all C/H files to match .clang-format (LLVM style)
- Fix 26 cppcheck const-correctness warnings (constParameterPointer,
constVariablePointer, constVariable)
- Update function declarations in headers to match const parameters
Feature changes across 15 files:
- -a/--archive: enables -c -m -M (no -s, which slows transfers)
- -n/--dry-run: scan + print without connecting or transferring
- -p <port>: custom SSH port (passed as -p to ssh via execvp)
- --exclude <pattern>: glob-based filename filtering in scanner
- --delete: sender collects file manifest; receiver deletes unlisted files
Protocol: added STATUS_MANIFEST, use_delete field in Config wire format.
New utilities: glob_match(), delete_extras() with recursive directory walk.
Scanner: accepts exclude patterns; skips matching entries.
SSH transport: switched from execlp to execvp for dynamic port arg.
Server + multiprocessing: handle STATUS_MANIFEST in both single and
multithreaded receive paths.
Builds clean, all 7 tests pass.
- Reduced test data from 50MB to 25MB (test.py)
- Increased SSH socketpair buffer to 1MB via setsockopt (transport_ssh.c)
- Made chunk size configurable: new Config field, --chunk-size CLI flag,
sent over wire, and used in scanner instead of DESIRED_CHUNK_SIZE
- Fixed DESIRED_CHUNK_SIZE macro parentheses (chunk.h)
- Remove FileReceive struct; use File everywhere with nullable FileMetadata*
- Remove struct stat from File; file size lives in Data->size (data_create_reserve)
- Add FileMetadata struct (mode, uid, gid, mtime) sent conditionally over wire
- Add -M / --preserve flag to client
- Restore permissions, ownership, timestamps on disk write
- Wire format uses per-file present flag for metadata (zero overhead when off)
- Fix scanner: when chunk fills up mid-directory, save DIR handle so
remaining files in that directory are not skipped (pre-existing bug)
- Fix -c -s: add STATUS_CHUNK to protocol, send it before chunk data,
handle it on the server side for both single and multithreaded paths
- Extract chunk_serialize/chunk_deserialize from chunk_compress/decompress
- Remove dead declarations (file_receive_from_buffer, etc.)
- Fix memory leak in receive_file_receive (free -> data_destroy)
- test.py generates ~50 MB of test data across bulk files
- All 8 integration tests + 7 unit tests pass
TapTap
opencode