Capture+transmit source atime (pre-read stat; O_NOATIME sender guard) and birth
time (statx STATX_BTIME); receiver restores atime with mtime (crtime not settable
portably -> transmitted, explicitly not applied). --open-noatime is client-only.
-O/-J documented as accepted no-ops (FastSync never preserves dir/symlink times).
Wire: metadata frame gains atime/crtime val+sec+nsec; PROTOCOL_VERSION
2.11.0->2.12.0. Review fixes: gate atime capture to Linux (no epoch clobber on
non-Linux), close fd on fdopen failure, honest -O/-J status (Compat no-op).
Receiver allocates the destination file's full size before streaming data
(posix_fallocate preferred, ftruncate fallback on EOPNOTSUPP/ENOSYS) so an
out-of-space transfer fails fast instead of partway. Additive config bool
crossing the wire; PROTOCOL_VERSION 2.10.0 -> 2.11.0. Threaded through all
store paths (atomic, inplace, partial/delay-updates staging, link-dest copy
fallback). Review hardening: explicit lseek(0) before the data write so
correctness does not depend on posix_fallocate leaving the fd offset unchanged.
Adds real algorithm selection (xxh64 default, plus md5 via OpenSSL EVP) and a
64-bit seed for the per-file whole-file digest used by the --incremental/
--checksum handshake and basis-dir content verification. The seed also feeds
the delta path's per-block xxHash32 strong checksum (low 32 bits) so an
explicit seed deterministically changes those digests too. Sender and receiver
hash identically: the algorithm id and seed cross the config wire frame and the
STATUS_CHECK handshake now carries a length-prefixed, bounded digest instead of
a fixed 64-bit value. Unsupported algorithm names are rejected at parse time
(never a silent no-op). PROTOCOL_VERSION bumped 2.9.0 -> 2.10.0; defaults
(xxh64, seed 0) preserve prior byte-for-byte behavior.
file_remove_tree_secure() opens the final component O_NOFOLLOW below the
authorized root and recursively wipes it with an fd-relative walk (symlinks are
removed by name, never followed); --force uses it to clear a destination
directory that blocks an incoming regular file.
The receiver's per-file incremental check now consults the ordered basis-dir
list whenever the destination is not already up to date. An exact basis match
requires equal size, equal mtime (unless --size-only; --ignore-times disables
basis matching like rsync), and an equal content xxHash64 -- the sender sends
its xxHash for every file whenever basis dirs are configured (not only under
--checksum), so a hard link or local copy is only ever made from byte-identical
content.
On a match:
- compare-dest: reply STATUS_OK and skip data only when the destination does
not already hold the file (sparse, rsync parity). A destination that holds
a DIFFERENT version falls back to a normal transfer instead of rsync's
delete, keeping the mirror complete.
- copy-dest: reply STATUS_OK and hand a synthetic File (bytes read from the
basis file, basis metadata) to the normal store sink, so the file is
installed as a real local copy through the existing atomic temp+rename
engine and honors --existing/--ignore-existing/--update/--backup/
--delay-updates/--partial-dir unchanged.
- link-dest: same, but File.basis_link records the basis path and the store
engine calls the new file_to_disk_secure_link(): an atomic temp hard link +
rename. Cross-filesystem/refused links fall back to a byte-identical local
copy (never a corrupt or partial file); the copy fallback applies metadata,
while a successful link keeps the basis inode's own attributes so the basis
file is never mutated.
Basis-materialized files carry File.skip so they are not acknowledged to a
--remove-source-files sender (the sender already saw STATUS_OK and keeps the
source). The no-match path is byte-for-byte identical to the existing delta /
full-data transfer.
RSYNC_COMPAT Phase-2 row M: path-list construction and destination
directory creation while preserving traversal safety.
- -R/--relative with --files-from: transmit each listed entry under its
bare relative destination path (no source-root mirror). Files keep an
absolute local read path plus a separate wire/dest path (File.send_path);
manifest, incremental quick-check and change output follow the wire path,
so --delete and --remove-source-files stay consistent. -R without
--files-from is unchanged (full mirror).
- --no-implied-dirs: client-only, only meaningful with -R + --files-from.
A listed file whose parent dir is not itself (or via an ancestor)
explicitly listed cannot be placed; the run fails up front with a clear
error. No effect otherwise.
- --dirs/-d + --old-dirs/--old-d aliases: -d <dir> transmits the source
root as an explicit empty directory entry (STATUS_MKDIR frame); with
--files-from listed dirs are created empty and listed files transferred,
never descending. Works single-threaded, -m (sequential scanner in the
-m scan thread) and chunk-serialization (per-file type marker).
Directory entries appear in the delete manifest.
- --mkpath: new wire bool; server creates the destination root (and missing
leading components under its authorized root) at connection start. A
missing destination root is now rejected by default.
- Protocol bumped to 2.7.0 (mkpath wire field + STATUS_MKDIR + chunk type
marker). All receive paths funnel through file_save_to_disk_full which
creates directories via the secure confined mkdir engine; dir entries are
excluded from --remove-source-files outcome acknowledgements on both ends.
- Unit coverage: CLI parse (relative/dirs aliases/mkpath/no-implied-dirs),
config round-trip (relative + mkpath), scanner --dirs non-recursion and
-R send_path (sequential + parallel), receiver dir-entry save.
- Integration coverage: TestRelativeFilesFrom, TestNoImpliedDirs, TestDirs,
TestMkpath (single and -m).
- RSYNC_COMPAT: 4 rows move to Implemented (Summary 67/3/5/1/71 = 147).
Stage every successfully written file under a private 0700 .fastsync-stage
directory inside the receive root and atomically publish all staged files
only after the whole protocol stream (manifest/delete handling included)
has completed, immediately before the success/outcome frame. On any
abort/error before publication nothing is installed and staging is removed;
a publish failure aborts the transfer with best-effort cleanup of the
remainder (already-published files are not rolled back). Crash leftovers
are wiped when the next delayed transfer starts.
Wire: new delay_updates config flag (selection-options block), protocol
version bumped to 2.6.0, client/server validation rejects --inplace.
CLI/usage/validation updated. Works in single-threaded and -m modes
(exactly one write_thread stages files; the staged-file registry is
mutex-protected; publication runs once after both threads join).
--existing/--ignore-existing/--update decide against the final destination
at stage time; --backup is deferred to publication. remove_source_files
outcomes are only sent after publication so skipped/unpublished sources are
never deleted. Default (no flag) behavior is unchanged.
Tests: config wire round-trip, CLI parse, --inplace rejection, new
test_delay_updates unit suite (27 suites total), and integration
TestDelayUpdates covering single/-m parity, incremental reruns, remove
source files, receiver-skip ordering, and a deterministic publish-failure
abort path.
- file.c split layout retained; security-hardened secure-fs helpers
(open_secure_parent/to_disk_secure/rename_secure/stat_secure) now live in
file.c with file_ prefix and are shared with file_receive.c
- file_receive.c takes the security branch's bounded allocations
(receive_data_limited, data_decompress_limited, size checks) and
STATUS_ERROR signaling
- file_send.c gains the data consistency check on file->data
- client_validation.c: stricter --tls requiring --ca, log_message style
- utils.c: hardened openat/mkdirat mkdir_r from security branch
- file.c: File/FileMetadata lifecycle and local disk helpers (~110 lines)
- file_send.c: client-side send path (file_send_single_calls, file_send_sendfile)
- file_receive.c: server-side receive/save path (file_receive, receive_incremental_check,
receive_manifest, file_save_to_disk)
- file_types.h holds shared struct definitions; file.h remains an umbrella header
so existing includes are unaffected
Completes the transfer/protocol separation started in PR #212
- Reformat all C/H files to match .clang-format (LLVM style)
- Fix 26 cppcheck const-correctness warnings (constParameterPointer,
constVariablePointer, constVariable)
- Update function declarations in headers to match const parameters
- Fix rolling adler32: add missing -1 in s2 update formula (was producing
wrong checksums, causing zero block matches)
- Fix file_send_sendfile signature to match typedef (add unused
compression_level param)
- Extract receive_delta_file() from receive_incremental_check() to reduce
nesting depth
- Extract send_file_incremental() helper in client_send.c
- Add delta_max_file_size to Config, serialized over wire
- Add --delta-max CLI flag
- Add test_large_file_delta (200KB) and extra delta_should_attempt cases
- Remove unused pos_in_block variable from delta_compute
Add bool send_path parameter to file_send_single_calls and
file_send_sendfile, remove the _no_path variants. Callers in
client_send.c pass true (send path) or false (skip path) based
on whether an incremental check already transmitted the path.
- receive_chunk_data(fd, config) -> Chunk*: shared receive/decompress/deserialize
(eliminates ~25 lines of duplication between server.c and multiprocessing.c)
- receive_manifest(fd, config, next_status): moved from server.c to file.c,
fixes missing 'Deleting files not in manifest...' log in multiprocessing.c
- Removes redundant manual free loop in multiprocessing.c manifest handling
(array_list_create(free) destructor already handles this)
- server.c and multiprocessing.c: remove local chunk/manifest helpers,
remove compression.h include (no longer needed)
- Extract file_save_to_disk() helper (replaces 4x duplicated disk-save boilerplate)
- Extract receive_incremental_check() shared helper (deduplicates STATUS_CHECK
handling between server.c single-threaded and multiprocessing.c multi-threaded paths)
- Break receive_files() into receive_chunk() and receive_manifest() sub-handlers
- Add incremental sync test case to test.py
- Rebase onto main
- New STATUS_CHECK protocol status (value 6)
- Client sends path + size + mtime; server replies OK (skip) or NEXT (send)
- config.h/c: use_incremental field sent/received over wire
- file.c/h: file_send_single_calls_no_path helper for incremental path
- client_cli.c: --incremental flag
- client_send.c: per-file check before send in both single and chunk paths
- server.c: STATUS_CHECK handling in receive_files()
- multiprocessing.c: STATUS_CHECK handling in receive_thread()
- test.py: incremental sync test case
- Merge io.h/c back into protocol.h/c
- Change send_data to take Data* argument
- Remove redundant file_load_data from send_chunk
- Move compression into file_send_single_calls
- Move file_receive from multiprocessing.c to file.c
Conflicts resolved:
- config_create signature: added both use_metadata and use_sendfile params
- config_send/config_receive: wire protocol includes both use_metadata and use_sendfile
- client.c: config_create call updated, arg parsing includes both -M/--preserve and -f/--sendfile
- test_config.c: all three config_create calls updated
- file_send_sendfile: use file->data->size instead of removed struct stat
TapTap