Stream one delete plan per source directory from sender to receiver instead of
a single whole-tree keep-set manifest:
- --delete-during applies each directory's extras as its plan arrives, before
that directory's data (rsync's generator-order deletion).
- --delete-delay snapshots each directory's extras while the plan arrives and
commits the removals only after a fully-successful transfer, so files created
after the scan survive (matching rsync's delete-delay, not delete-after).
- Type conflicts (a destination file blocking a source directory, or vice
versa) are cleared immediately in both modes, so the nested write succeeds.
The plan carries the destination-relative directory, its kept child directory
names and its kept child file names; the first frame also carries the global
protected prefixes, size-skipped prefixes and --delete-missing-args paths.
--delete-before keeps the existing whole-tree early manifest; plain --delete and
--delete-after keep the end-of-transfer manifest commit.
Preserves the existing safety surface: protected/size-skipped prefixes and the
--delay-updates/basis skips are honored at any depth, deletion is scoped to the
synchronized directories (--files-from), MAX_SERVER_DELETE_COUNT and
--max-delete (partial + exit 25) are shared across plans, symlinks are never
followed, and paths are confined to the receive root.
Bump PROTOCOL_VERSION to 2.25.0 and append a report_stats bool to the
config frame, add a STATUS_STATS status, and add process-wide wire byte
counters (protocol_bytes_written/read) for the client.
Render the rsync 3.4.1 --out-format %b (wire bytes sent) and %c (wire
bytes read back) tokens from per-file counter deltas, and %C (whole-file
xxh128 checksum, seed 0) via a new streaming checksum_digest_file().
Address review findings on feat/rsync-parity:
- confine --temp-dir below the receive root (reject absolute/.. like
backup-dir/partial-dir); keep EXDEV non-atomic fallback
- floor server session I/O deadlines at SERVER_IO_TIMEOUT_SEC (60s) and
install it on the socket layer at startup (slow-loris)
- charge each --delete-missing-args directory removal once and clamp the
extras-walk remaining budget so it can never underflow past --max-delete
- normalize --compress-choice=auto to zstd client-side and accept it on
receive so auto transfers no longer fail
- map received --max-alloc=0 to MAX_SERVER_ALLOC (receive path only)
- zero File.dest_state; include log-file-format in report_dest_info;
add STATUS_DELETE_LIMIT name; recognize --skip-compress as a
separate-value option; OOM-guard send_list_only root entry; drop the
dead -M= branch; record the bare relative protected prefix for -R
size-prunes in both scanners; refresh delete-manifest comment
- pin the rsync tarball sha256 and bump integrator image to v11
Tests: temp-dir rejection/relative/cross-device, server timeout floor,
delete-missing dir budget regression, compress-choice=auto e2e,
max-alloc=0 receive mapping, dest_state, report_dest_info modes,
skip-compress dash value, -M short forms, -R root size-prune mirror
protection (rsync 3.4.1 confirmed).
- Scope the --delete extras walk to directories synchronized by the
transfer: add a synchronized-directory section to the delete manifest
(protocol 2.23.0) so --files-from subsets no longer delete untransmitted
paths outside listed directory subtrees (data-loss fix).
- Separate --max-size/--min-size prune protection from --delete-excluded so
size-pruned source mirrors survive (rsync parity).
- Unlink extraneous destination symlinks instead of skipping them.
- Make --max-delete partial (delete up to N, skip the rest) and exit 25;
accept negative values as unlimited.
- Draw --delete-missing-args deletions from the shared --max-delete budget.
- Honor --force during --delay-updates publication.
Add unit and integration regression tests; update the pinned config wire
golden and version strings for the 2.23.0 manifest/status additions.
#289 checksum/compression:
- -c/--checksum now implies the incremental content quick-check (without
implying -t), so an unchanged file is skipped like rsync.
- --checksum-choice/--cc accepts xxh64/xxhash, xxh3, xxh128, md5 and auto;
md4/sha1/none and the two-name form are rejected by name.
- --compress-choice/--zc rejects lz4/zlib/zlibx by name (zstd/none/auto kept).
- --checksum-seed=0 is randomized per transfer and sent on the wire.
- --skip-compress uses rsync 3.4.1's default suffix list; slash separators and
dot-less suffixes are accepted.
- add --no-whole-file.
#295 timeouts/alloc/temp-dir:
- --timeout default 0 (disabled), --contimeout default 60; 0 disables both,
plus --no-timeout/--no-contimeout.
- --max-alloc=0 means no allocation limit (was rejected).
- --temp-dir accepts any dir, requires it to exist, and falls back to a
non-atomic copy on EXDEV instead of aborting.
#296 connectivity/daemon:
- -M/--remote-option is rejected for daemon/TCP destinations (SSH-only).
- --trust-sender clarified as receiver-local; server-path tests added.
- --stop-at accepts rsync's full date form (y-m-dTh:m etc.).
Adds unit and integration coverage; no wire-field change, PROTOCOL_VERSION stays
2.22.0.
- #286: --numeric-ids is a mapping modifier only; it no longer activates
chown by itself (identity_active_enabled/owner/group predicates), and
--fake-super stores the resolved mapping instead of real-chowning.
- #286: apply owner/group to directories via the deferred directory
metadata path; capture+transmit+apply directory xattrs/ACLs (-aX/-aA),
including default ACLs, in STATUS_MKDIR/STATUS_DIR_TIMES.
- #294: --usermap/--groupmap support inclusive ranges, '*', empty FROM
(unnamed ids), and receiver-side TO name resolution; --chown mixing with
a same-side map is rejected like rsync.
- Protocol 2.22.0 -> 2.23.0 (map wire entry gains from_hi + to_name;
dir frames gain a bounded xattr block).
#291:
- Compile --exclude/--include/--exclude-from/--include-from into the SAME
ordered rule list as --filter/-f (first match wins), so the common
`--include='*.txt' --exclude='*'` idiom and include-alone semantics match
rsync. The legacy per-kind scanner arrays are no longer applied.
- -x/--one-file-system emits the cross-device mount-point directory entry
(empty) instead of dropping it, in both the sequential and parallel scanners.
- Stop passing the legacy arrays to the scanner; document -f is --filter.
#292:
- New src/shared/format.c/.h: rsync "big_num" (comma-grouped integers) and
decimal -h human sizes, %M/%t timestamp, and the STATUS_DEST_INFO codec.
- Receiver answers each STATUS_CHECK with a pre-transfer destination snapshot
(new report_dest_info wire field + STATUS_DEST_INFO, PROTOCOL_VERSION
2.23.0) so the sender can render true itemize columns.
- Itemize now emits rsync-correct update/type chars and c/s/t/p/o/g columns
for files, dirs, symlinks and hard links, comparing size/time/perms/owner/
group against the reported destination.
- --out-format gains %i %n %f %l %b %M %t %o %p %B %U %G %L; %f is the
relative display path, %M the YYYY/MM/DD-HH:MM:SS form, %b the literal
bytes sent.
- --list-only prints transfer-relative names, directory entries and ls-style
grouped sizes.
- --stats prints rsync's multi-line block on stdout; -h uses decimal units.
Tests: unit tests for the filter ordering, format primitives, itemize
columns; integration + differential tests against real rsync 3.4.1 for
itemize/out-format/list-only/selection and -x. Golden wire len/hash and
protocol version strings updated for 2.23.0.
Split FastSync's single use_metadata bundle into four independent rsync-parity attributes: preserve_perms, preserve_times, preserve_owner, preserve_group. use_metadata is now a derived transport bit (config_derived_use_metadata).
CLI: real -p/--perms, -t/--times, -o/--owner, -g/--group plus --no-perms/--no-times/--no-owner/--no-group (short and long) and --no-preserve; -a is now rsync -rlptgoD; --preserve = -pt; -A implies -p; -X does not; --chmod implies -p; --usermap/--groupmap/--chown imply owner/group per side; --incremental/--delta still auto-preserve unless negated.
Receiver: per-attribute FileAttrPolicy gating for files, dirs (modes applied at end of transfer), symlinks and specials; rsync -E read-bit rule; new files get source_mode & ~umask sanitized (no group/other write); per-side identity resolution; deferred directory metadata; batch dir-metadata replay; daemon modules without 'client owner = yes' no longer refuse plain -a but force super off (no ownership) with a warning.
Wire: PROTOCOL_VERSION 2.21.0 -> 2.22.0 (four appended config bools, golden 653 / 95530566005420798). FileMetadata/chunk/batch framing unchanged. Docs/CHANGELOG/CMake updated to 2.22.0.
A remote destination's user@host token is passed to ssh in option
position, so a host beginning with '-' (e.g. -oProxyCommand=...) was
parsed by ssh as an option, allowing arbitrary command execution.
- config_parse_ssh_dest now validates the user@host prefix and returns
-1 (with a clear logged error) for an empty host or a user/host that
starts with '-'; config_parse_transport_dest propagates the failure.
- transport_ssh.c's parse_remote_dest applies the same validation as
defense-in-depth, and ssh_build_client_argv inserts a '--'
end-of-options marker before the destination token.
- Unit tests cover -oProxyCommand=... / -prefixed hosts / empty host
rejection and the argv shape.
--dry-run --server-host=H (or TLS / source-bind --address) silently ran the
client-side manifest even though a real run contacts the server. Add a
client-only, never-serialized server_host_set bit (alongside the existing
server_port_set) and extend dry_run_targets_server so every explicit remote
target contacts the receiver.
Also make incremental_check return the dry-run code (4) only when the
session actually requested dry-run; a stray STATUS_DRY_RUN_TRANSFER from a
hostile/buggy peer is now a logged protocol error (STATUS_ERROR) instead of
falling through to send file data and desync. Both normal send_single_file
callers handle rc == 4 explicitly as an abort.
Today a server rejection sends a bare STATUS_ERROR and the reason only
reaches the server log, so the client cannot say why a transfer was
refused. Add an optional, bounded server->client error-detail frame:
- Status gains STATUS_ERROR_DETAIL appended LAST so existing wire
values are unchanged.
- send_error_detail(fd, msg) sends STATUS_ERROR_DETAIL followed by the
existing length-prefixed string primitive, slicing over-long messages
to MAX_ERROR_DETAIL_BYTES (4096).
- receive_status() (and the timed/keepalive status readers) always
consume the detail body and map the status back to STATUS_ERROR,
capturing the text into a thread-local buffer exposed by
protocol_last_error(); a bare STATUS_ERROR leaves it cleared. Every
existing call site keeps working and the stream cannot desync.
- Upgrade the daemon module gate / config validation (config.c), the
final transfer failure (server.c) and receiver-side path/node
validation (file_receive.c) to send a concrete reason; surface it on
the client in client_send.c/config.c.
- Bump PROTOCOL_VERSION to 2.21.0 (CMake VERSION, CHANGELOG, docs) and
update the pinned config wire golden hash / CLI-version tests.
- Add tests/test_protocol_error.c covering mapping+capture, the
over-long bound, bare-error clearing, and thread-locality.
--dry-run now handshakes with a remote/daemon receiver and reports what
WOULD transfer/skip based on receiver state, mutating nothing on either
side.
- Serialize Config.dry_run into the wire config frame and append
STATUS_DRY_RUN_TRANSFER to the status enum (no renumbering); bump
PROTOCOL_VERSION/CMake VERSION/CHANGELOG/golden wire to 2.21.0.
- Receiver: receive_incremental_check_ex runs the normal read-only
decision and answers STATUS_OK (skip) or STATUS_DRY_RUN_TRANSFER
(would transfer) with no basis materialization/append/delta/full
transfer. All mutation sites are guarded by !dry_run: file store,
manifest deletes, --mkpath root creation, --delay-updates staging,
publication, directory-time application, and outcome acks.
- Client: send_dry_run_remote connects, sends the config, checks each
regular file and prints the would-transfer set + trailer; no file data
or delete manifest is sent. Plain local destinations keep the
client-side manifest.
Address low-severity review findings on the X-macro config refactor:
1. The golden test only hashed config_send_wire_block(), so a
receive-side KIND that reads a different width/order could still
round-trip symmetrically. Add test_config_wire_golden_receive():
capture the same hash-pinned 633-byte frame and feed it through
config_receive(), asserting every field (config_wire_equal) plus the
derived use_delta/use_xattrs bits and representative bounded kinds.
Add test_config_wire_receive_bounds() for bounds the symmetric
round-trip cannot reach: an out-of-range BOOL (hand-built frame),
RAW_MAXALLOC zero, a malformed STR_MODULE, an over-cap
INT_IDMAPCOUNT, and an out-of-range INT_IDENTITY chown_uid.
2. golden_config_populate() set long runs of booleans to all-1, so an
adjacent swap within a run produced identical bytes. Alternate the
boolean values and make the fixture receiver-valid (chmod grammar
"u=rwx,go=rx" is the same 11 bytes; delta_max_file_size inside the
bound). Re-pin the golden: len stays 633, hash is now
9160991280011164139 (computed, not guessed).
3. Document in config.h and client_cli.c that the CLI option tables
remain hand-maintained and are deliberately not generated from the
wire-field X-macro (client-only fields, flag/alias/negation
semantics). No CLI-table rewrite.
PROTOCOL_VERSION stays "2.20.0"; src/shared/config.c is untouched and
the wire bytes are unchanged apart from the fixture's own new values.
Every Config field that crosses the wire was declared in up to six places
(struct member, config_set_defaults, send_*, receive_*, and the two CLI
option tables) and could drift silently. Add CONFIG_WIRE_FIELDS in
config.h: one ordered per-segment table where each serialized field is
declared once with its C type, default and wire codec (KIND).
config.h now expands the table to declare the struct members;
config_set_defaults() expands it to assign the defaults; and
config_send_wire_block()/config_receive() expand the per-segment lists to
emit/consume the frame. The per-segment function names, call order and
segment boundaries are preserved exactly.
Fields with genuinely custom logic keep dedicated helpers but are still
declared once in the table: the protocol-version handshake (HEADER), daemon
SCRAM auth (STR_REDACTED_AUTH), the daemon module name (STR_MODULE), the
repeated count+array blocks (BLOCK_SKIP_SUFFIXES/BLOCK_BASIS/BLOCK_IDMAP),
--copy-as presence/ids (COPY_AS_*), and the derived --delta / use_xattrs
bits (DERIVED_DELTA, BOOL_XATTR_DERIVE). The version field remains a
special header (validated before any other field is parsed) and is sent by
config_send_wire_block() explicitly.
No public field is renamed and PROTOCOL_VERSION stays "2.20.0". Because
the struct declaration order is no longer the wire order, the wire order is
now enforced solely by the table and by a byte-exact golden test
(follow-up commit). Add config_send_wire_block() so that test can hash the
frame body without the STATUS_OK handshake.
Type Config.super_mode as SuperMode (a proper C enum) instead of a bare
int. The wire boundary still carries the mode as an int: send casts the
enum explicitly and receive reads a temporary int, validates the
AUTO..OFF range, then casts. Emitted bytes and accepted values are
unchanged. ModuleGateContext.super_mode_override keeps its -1 sentinel
as int with an explicit cast at the apply site.
Behavior preserved.
A1: daemon refuses every client-chosen ownership/super-user request
(--numeric-ids/--chown/--usermap/--groupmap/--fake-super/--copy-as/--super)
unless the selected module opts in with 'client owner = yes'.
A2: fake-super owner replay requires an explicit ownership identity policy.
A3: --super no longer implies --numeric-ids (ownership stays opt-in).
A5: a failed --copy-as chown marks the entry failed instead of reporting
success with the wrong owner.
Add the receiver-side --super / --no-super tri-state (Config->super_mode)
under the safe-subset + clear-refusal privilege model: FastSync never
elevates privileges, it only permits super-user attempts that are already
confined fd-relative below the authorized receive root.
- identity: privilege_super_permitted() gate (OFF=false, ON=true, AUTO follows
geteuid()==0); identity_apply_ownership/_link become no-ops when not
permitted; --super with no explicit identity policy implies raw numeric-id
preservation (explicit usermap/groupmap/chown/numeric-ids still win); warn
exactly once when --super is requested by a non-root receiver.
- file_receive: gate char/block device-node creation on the gate; FIFO/socket
handling is unchanged.
- wire: trailing super_mode int after the --iconv spec, validated 0..2 in
receive_privilege_options and validate_received_config; PROTOCOL_VERSION
2.17.0 -> 2.18.0; version-sensitive tests and docs updated.
- CLI: --super/--no-super parsed explicitly before the generic --no-* branch
(malformed --super=x rejected); usage text added.
- tests: config wire round-trip + invalid-value rejection, privilege-gate mode
unit test, CLI parse test, integration transfer + root-gated ownership
suppression/appliance tests.
- docs: RSYNC_COMPAT --super row + Wave E note, protocol mentions, README.
Force the receiver to apply the requested owner/group to every written
entry through the confined fd-relative identity path instead of switching
the process credentials (unsafe for the multithreaded receiver). An
unprivileged receiver refuses the transfer up front in server_module_gate,
before STATUS_OK, so no data is written with the wrong ownership.
- new Config fields copy_as_set/copy_as_uid/copy_as_gid + defaults
- identity_parse_copy_as (name/@N/* resolution, primary-gid default,
gid==uid fallback for numeric ids with no passwd entry); implies -M
- identity snapshot + highest-priority forcing in identity_resolve_targets
- identity_copy_as_refused() helper
- trailing config-frame block (presence int + two int32 ids, >=0 checked)
- PROTOCOL_VERSION 2.17.0 -> 2.18.0; version-sensitive tests updated
- unit tests for parse + wire round-trip/negative-id rejection
- integration TestCopyAs: unprivileged refusal + root chown assertion
- RSYNC_COMPAT.md --copy-as row updated (safe subset + divergence); README
protocol version refreshed
Review fixes for Phase 7 Wave D.
#1 (HIGH): STATUS_DIR_TIMES entries no longer create directories. A new
receiver-only File.dir_time_only flag marks dir-time entries; file_save_to_disk_full
short-circuits them as FILE_SAVE_SKIPPED before any device/dir branch, so the sink
still accumulates metadata into the deferred DirTimeList but creates nothing. Empty
source dirs stay untransferred (-a), -m/--prune-empty-dirs semantics are preserved,
and a pre-existing regular file/symlink at an empty-dir mirror path no longer aborts
the transfer. dir_time_list_apply fstatat()s the leaf (AT_SYMLINK_NOFOLLOW) and skips
absent/non-directory paths QUIETLY; only a real existing directory is stamped.
Also initialize File.dir_time_only in file_create() (uninitialised garbage otherwise).
#2 (MED): send_dir_times() chunks entries into repeated STATUS_DIR_TIMES frames of at
most MAX_MANIFEST_ENTRIES, matching the receiver's per-frame bound; the tautological
> INT_MAX check is gone.
#3 (LOW): dir_time_list_add() assigns each grown array right after its realloc (no
dangling) and advances capacity only after both succeed.
#4 (LOW): RSYNC_COMPAT.md -- STATUS_MKDIR carries metadata, dir times are transmitted
via STATUS_DIR_TIMES and applied at the end, empty dirs are still never created; -m
rationale, -O row and Wave D notes updated. Summary counts untouched.
#5 (LOW): integration tests for the three #1 scenarios (empty-dir non-creation under
-a and -a -m, collision non-abort), scanner test now covers empty-dir capture, and
test_file_restore_symlink_metadata asserts the positive apply path when supported.
PROTOCOL_VERSION stays 2.17.0; config-frame layout unchanged.
Wave D of Phase 7. Make -O/--omit-dir-times and -J/--omit-link-times real by
preserving directory and symlink times, and mark --secluded-args as an explicit
Impossible/Divergence no-op.
Wire: PROTOCOL_VERSION 2.16.0 -> 2.17.0. Adds a terminal STATUS_DIR_TIMES frame
(int count + (wire path, metadata) pairs) sent after all file data and the
optional delete manifest. STATUS_MKDIR also carries metadata for --dirs entries.
Config-frame layout is unchanged.
Sender: the recursive scanner captures every traversed source directory (both
DirectoryScanner and the parallel scanner root + workers, appends mutex-guarded)
into a shared list; the single-threaded and -m paths transmit it last.
Receiver: a DirTimeList accumulates received directory metadata and applies it
with fd-relative no-follow utimensat only at the very end -- after all children,
after the commit-style --delete, and after --delay-updates publication -- in the
single-threaded success frame and in server.c after the -m threads join. -O skips
the application. Symlink metadata is applied at link creation with
utimensat/fchownat/fchmodat AT_SYMLINK_NOFOLLOW; -J suppresses only link times.
identity_apply_ownership_link shares the identity resolver with the fd path.
Docs: -O/-J rows -> Implemented; --secluded-args -> Impossible/Divergence;
--protocol accepted/rejected values and Phase-6/7 notes updated.
Tests: unit (scanner dir capture, DirTimeList apply, symlink metadata, protocol
version values) and integration (dir mtime round-trip + -O, symlink mtime
round-trip + -J, independent suppression), parameterized over single/multithread.
Implements the client-only residual-batch feature end-to-end:
- src/shared/batch.{c,h}: self-contained single-file batch codec using the
existing chunk_serialize/chunk_deserialize codec (byte-identical by
construction). Magic+format-version header (metadata mode is persisted into
the header so a batch is self-describing across machines), length-prefixed
chunk records, bounded reads that reject malformed/truncated/oversized
records cleanly.
- src/client/client_send.c: write_batch_from_source (deterministic separate
scan pass, loads every chunk's file images, emits header+records) and
apply_batch_to_dest (local apply to a destination root via
file_save_to_disk_full). No wire change, no server involved.
- src/client/client_validation.c: --write-batch XOR --only-write-batch;
--read-batch exclusive with both; --read-batch needs only a DEST,
--only-write-batch only a SOURCE.
- src/client/client_cli.c: main() drives the three batch modes without
connecting/transferring for read/only-write; --write-batch runs the live
transfer (single-threaded so the config survives) then emits the batch.
- tests/test_batch.{c,h} (unit: byte-identical roundtrip with and without
metadata; bad-magic/truncated/oversized rejection) + tests/integration/
test_batch.py (only-write no-server, read-batch no-source roundtrip,
--write-batch with a live transfer, conflict rejections).
- clang-format: realign PART-1 config.h comment block.
No PROTOCOL_VERSION bump, no config-frame field, no server flag.
TapTap
opencode