- --bwlimit: faithful port of rsync 3.4.1 parse_size_arg (default KiB/s,
binary K/M/G/T/P, decimal KB/MB, KiB/MiB, decimals, 0 = unlimited, 512-byte
floor, (size+512)/1024 quantization). Unit tests + docs.
- --info: wire del/remove/name/flist/nonreg/progress to real FastSync events in
rsync's line format (deleting PATH, sender removed NAME, name lines,
'sending incremental file list', skipping non-regular file "NAME"); name no
longer aliases copy; --info=progress drives the progress path and report_stats.
- --ignore-errors: match rsync's default -- a source I/O error skips deletion
unless --ignore-errors, while the readable tree still transfers and the run
exits 23. Covers all delete timings and both send paths.
Add tests/integration/test_codecs.py (accept/reject matrix and byte
differential against rsync 3.4.1 for every algorithm), extend the
checksum/compression unit tests with MD4/SHA1/none vectors and per-codec
round-trips, pin the new config golden (2.26.0), and update the version
strings and codec acceptance expectations.
Replace the aggregate stderr progress with rsync 3.4.1's per-file progress
block (name, 32 KiB first frame, final frame with (xfr#N, to-chk=X/Y)).
Add differential tests against real rsync for --out-format %C/%b, the
--progress frames, selected --stats lines and -n --delete lines.
Stream one delete plan per source directory from sender to receiver instead of
a single whole-tree keep-set manifest:
- --delete-during applies each directory's extras as its plan arrives, before
that directory's data (rsync's generator-order deletion).
- --delete-delay snapshots each directory's extras while the plan arrives and
commits the removals only after a fully-successful transfer, so files created
after the scan survive (matching rsync's delete-delay, not delete-after).
- Type conflicts (a destination file blocking a source directory, or vice
versa) are cleared immediately in both modes, so the nested write succeeds.
The plan carries the destination-relative directory, its kept child directory
names and its kept child file names; the first frame also carries the global
protected prefixes, size-skipped prefixes and --delete-missing-args paths.
--delete-before keeps the existing whole-tree early manifest; plain --delete and
--delete-after keep the end-of-transfer manifest commit.
Preserves the existing safety surface: protected/size-skipped prefixes and the
--delay-updates/basis skips are honored at any depth, deletion is scoped to the
synchronized directories (--files-from), MAX_SERVER_DELETE_COUNT and
--max-delete (partial + exit 25) are shared across plans, symlinks are never
followed, and paths are confined to the receive root.
- --chmod no longer implies --preserve-perms; repeated --chmod options
accumulate, and D/F/X selectors plus s/t special bits are supported with
rsync's exact parse_chmod/tweak_mode semantics.
- Stop masking group/other write and setuid/setgid/sticky: -p copies the
source mode exactly, no-p new entries use source&~umask, directories keep
setgid/sticky, and special nodes follow the same rules.
- Apply ownership before mode on the fd path so a chown cannot clear the
setuid/setgid bits -p just restored (rsync order).
- Update unit and integration tests, including differential checks against
rsync 3.4.1.
Address review findings on feat/rsync-parity:
- confine --temp-dir below the receive root (reject absolute/.. like
backup-dir/partial-dir); keep EXDEV non-atomic fallback
- floor server session I/O deadlines at SERVER_IO_TIMEOUT_SEC (60s) and
install it on the socket layer at startup (slow-loris)
- charge each --delete-missing-args directory removal once and clamp the
extras-walk remaining budget so it can never underflow past --max-delete
- normalize --compress-choice=auto to zstd client-side and accept it on
receive so auto transfers no longer fail
- map received --max-alloc=0 to MAX_SERVER_ALLOC (receive path only)
- zero File.dest_state; include log-file-format in report_dest_info;
add STATUS_DELETE_LIMIT name; recognize --skip-compress as a
separate-value option; OOM-guard send_list_only root entry; drop the
dead -M= branch; record the bare relative protected prefix for -R
size-prunes in both scanners; refresh delete-manifest comment
- pin the rsync tarball sha256 and bump integrator image to v11
Tests: temp-dir rejection/relative/cross-device, server timeout floor,
delete-missing dir budget regression, compress-choice=auto e2e,
max-alloc=0 receive mapping, dest_state, report_dest_info modes,
skip-compress dash value, -M short forms, -R root size-prune mirror
protection (rsync 3.4.1 confirmed).
A non-empty --delete-missing-args directory removed under --force/--delete
now has its contents deleted entry-by-entry through the budgeted walker, so
every deleted file/dir counts toward --max-delete exactly like rsync (a
capped run leaves the remaining entries and exits 25).
- Scope the --delete extras walk to directories synchronized by the
transfer: add a synchronized-directory section to the delete manifest
(protocol 2.23.0) so --files-from subsets no longer delete untransmitted
paths outside listed directory subtrees (data-loss fix).
- Separate --max-size/--min-size prune protection from --delete-excluded so
size-pruned source mirrors survive (rsync parity).
- Unlink extraneous destination symlinks instead of skipping them.
- Make --max-delete partial (delete up to N, skip the rest) and exit 25;
accept negative values as unlimited.
- Draw --delete-missing-args deletions from the shared --max-delete budget.
- Honor --force during --delay-updates publication.
Add unit and integration regression tests; update the pinned config wire
golden and version strings for the 2.23.0 manifest/status additions.
#289 checksum/compression:
- -c/--checksum now implies the incremental content quick-check (without
implying -t), so an unchanged file is skipped like rsync.
- --checksum-choice/--cc accepts xxh64/xxhash, xxh3, xxh128, md5 and auto;
md4/sha1/none and the two-name form are rejected by name.
- --compress-choice/--zc rejects lz4/zlib/zlibx by name (zstd/none/auto kept).
- --checksum-seed=0 is randomized per transfer and sent on the wire.
- --skip-compress uses rsync 3.4.1's default suffix list; slash separators and
dot-less suffixes are accepted.
- add --no-whole-file.
#295 timeouts/alloc/temp-dir:
- --timeout default 0 (disabled), --contimeout default 60; 0 disables both,
plus --no-timeout/--no-contimeout.
- --max-alloc=0 means no allocation limit (was rejected).
- --temp-dir accepts any dir, requires it to exist, and falls back to a
non-atomic copy on EXDEV instead of aborting.
#296 connectivity/daemon:
- -M/--remote-option is rejected for daemon/TCP destinations (SSH-only).
- --trust-sender clarified as receiver-local; server-path tests added.
- --stop-at accepts rsync's full date form (y-m-dTh:m etc.).
Adds unit and integration coverage; no wire-field change, PROTOCOL_VERSION stays
2.22.0.
- #286: --numeric-ids is a mapping modifier only; it no longer activates
chown by itself (identity_active_enabled/owner/group predicates), and
--fake-super stores the resolved mapping instead of real-chowning.
- #286: apply owner/group to directories via the deferred directory
metadata path; capture+transmit+apply directory xattrs/ACLs (-aX/-aA),
including default ACLs, in STATUS_MKDIR/STATUS_DIR_TIMES.
- #294: --usermap/--groupmap support inclusive ranges, '*', empty FROM
(unnamed ids), and receiver-side TO name resolution; --chown mixing with
a same-side map is rejected like rsync.
- Protocol 2.22.0 -> 2.23.0 (map wire entry gains from_hi + to_name;
dir frames gain a bounded xattr block).
#287:
- --safe-links: keep safe in-tree links AS symlinks and skip unsafe
(absolute or ".."-escaping) ones, mirroring rsync's unsafe_symlink().
Skipped links are recorded as delete-protected so --delete does not
remove their destination mirror (no silent data loss).
- --copy-unsafe-links: preserve safe links as symlinks and dereference
only unsafe ones.
- --munge-links: receiver-side rewrite storing /rsyncd-munged/-prefixed
targets (rsync parity), replacing the no-op #SYMLINK sender prefix.
- -l: store the target verbatim, including absolute and ".." targets
(rsync -l parity); the old receiver containment silently dropped them.
#288:
- --specials: recreate unix-domain sockets via mknod(S_IFSOCK), which
Linux permits unprivileged; keep EEXIST/EPERM skip behavior.
- --copy-devices: copy a device's content into a regular file when
requested; skip unrequested non-regular entries like rsync's default.
#291:
- Compile --exclude/--include/--exclude-from/--include-from into the SAME
ordered rule list as --filter/-f (first match wins), so the common
`--include='*.txt' --exclude='*'` idiom and include-alone semantics match
rsync. The legacy per-kind scanner arrays are no longer applied.
- -x/--one-file-system emits the cross-device mount-point directory entry
(empty) instead of dropping it, in both the sequential and parallel scanners.
- Stop passing the legacy arrays to the scanner; document -f is --filter.
#292:
- New src/shared/format.c/.h: rsync "big_num" (comma-grouped integers) and
decimal -h human sizes, %M/%t timestamp, and the STATUS_DEST_INFO codec.
- Receiver answers each STATUS_CHECK with a pre-transfer destination snapshot
(new report_dest_info wire field + STATUS_DEST_INFO, PROTOCOL_VERSION
2.23.0) so the sender can render true itemize columns.
- Itemize now emits rsync-correct update/type chars and c/s/t/p/o/g columns
for files, dirs, symlinks and hard links, comparing size/time/perms/owner/
group against the reported destination.
- --out-format gains %i %n %f %l %b %M %t %o %p %B %U %G %L; %f is the
relative display path, %M the YYYY/MM/DD-HH:MM:SS form, %b the literal
bytes sent.
- --list-only prints transfer-relative names, directory entries and ls-style
grouped sizes.
- --stats prints rsync's multi-line block on stdout; -h uses decimal units.
Tests: unit tests for the filter ordering, format primitives, itemize
columns; integration + differential tests against real rsync 3.4.1 for
itemize/out-format/list-only/selection and -x. Golden wire len/hash and
protocol version strings updated for 2.23.0.
Split FastSync's single use_metadata bundle into four independent rsync-parity attributes: preserve_perms, preserve_times, preserve_owner, preserve_group. use_metadata is now a derived transport bit (config_derived_use_metadata).
CLI: real -p/--perms, -t/--times, -o/--owner, -g/--group plus --no-perms/--no-times/--no-owner/--no-group (short and long) and --no-preserve; -a is now rsync -rlptgoD; --preserve = -pt; -A implies -p; -X does not; --chmod implies -p; --usermap/--groupmap/--chown imply owner/group per side; --incremental/--delta still auto-preserve unless negated.
Receiver: per-attribute FileAttrPolicy gating for files, dirs (modes applied at end of transfer), symlinks and specials; rsync -E read-bit rule; new files get source_mode & ~umask sanitized (no group/other write); per-side identity resolution; deferred directory metadata; batch dir-metadata replay; daemon modules without 'client owner = yes' no longer refuse plain -a but force super off (no ownership) with a warning.
Wire: PROTOCOL_VERSION 2.21.0 -> 2.22.0 (four appended config bools, golden 653 / 95530566005420798). FileMetadata/chunk/batch framing unchanged. Docs/CHANGELOG/CMake updated to 2.22.0.
Follow-up to a237043 addressing three security/correctness re-review findings.
(1) MEDIUM: a server-contacting --dry-run with --compare-dest/--copy-dest/
--link-dest still read and hashed the basis file and compared it with the
client-supplied digest, a 1-bit content oracle. basis_match_find() gains a
hash_content parameter; the dry-run shortcut passes false and returns no
match without touching basis bytes, so an otherwise-matching entry is
reported as would-transfer. The real (non-dry-run) path is unchanged.
(2) LOW: xattr_capture_path() hardcoded preserve_acls=true, so the receiver's
hard-link copy fallback re-applied system.posix_acl_* even when -A was not
negotiated. The function now takes preserve_acls and members.* is
unaffected; scanner and receiver callers thread the negotiated flag.
(3) INFO: the --fsync --link-dest temp reopen now uses O_NONBLOCK and treats
a raced-in FIFO's ENXIO as a benign fsync-skip instead of blocking.
Tests: dry-run + basis unit test (asserts would-transfer, no content read) and
integration test; xattr capture ACL-filter test. Verified strict build, ASan,
clang-format, cppcheck, and the CI integration subset.
Address confirmed receiver security findings B1-B6:
B1 (HIGH): add O_NONBLOCK to the three receiver read-opens that opened an
existing destination/basis entry before the S_ISREG gate
(incremental_check_open_destination, basis_open_regular, hardlink_read_source)
so a client-planted FIFO can no longer block the receive thread forever while
the post-open type gate still rejects it.
B2 (HIGH/MED): --inplace now fstatat(AT_SYMLINK_NOFOLLOW)-probes the target and
refuses any existing non-regular entry, opens with O_NONBLOCK, and re-checks
S_ISREG on the opened fd. This stops a FIFO from hanging the open and stops a
char/block device from being written directly (bypassing --write-devices).
B3 (MED): under --dry-run the incremental quick-skip no longer reads/hashes the
destination file for --checksum/--delta; it decides from metadata only and
reports would-transfer when the comparison is inconclusive, closing the
read-only-module content-hash oracle.
B4 (LOW): xattr_name_appliable() now gates the two system.posix_acl_* names on
preserve_acls (--acls), not the derived use_xattrs (--xattrs OR --acls). The
receiver drops (never applies) ACL entries when -A was not negotiated while
keeping user.* working for -X.
B5 (INFO): receive_manifest_section() charges a per-entry overhead against
MAX_MANIFEST_BYTES and the aggregate entry count across all three sections is
capped at MAX_MANIFEST_ENTRIES.
B6 (MED): data_charge_session() reserves decompressed/chunk-copy bytes against
the owning ProtocolSession (MAX_CONNECTION_MEMORY) and records them on the Data
so data_destroy() releases them via the Data.owner path. Applied to the
whole-file/append/delta decompression sites and chunk_deserialize() per-file
copies; a missing session owner degrades to the previous uncharged behavior.
Tests: FIFO destination/basis non-hang (with alarm), --inplace FIFO/device
refusal, dry-run no-read oracle test plus updated metadata-only dry-run tests,
ACL-without--acls drop, manifest total-entry cap, and chunk session charging.
C2: --force is deletion authority (an incoming regular file may remove a
non-empty destination directory tree, and --delete-missing-args may
remove a non-empty directory mirror), but it was not masked by the
operator --allow-delete policy. The handler now clears
config->force_delete unless --allow-delete was given, exactly like
--delete and --delete-missing-args.
C3: a standalone TCP / --stdio server running as root defaulted to
SUPER_MODE_AUTO, so an untrusted client --devices/--write-devices/
--super could make it create device nodes, write raw devices, or apply
client-chosen ownership. A privileged standalone receiver now forces
SUPER_MODE_OFF unless the operator opts in with the new server-only
--allow-super flag. Non-root receivers are unchanged, and the daemon
path keeps its per-module `client owner = yes` gate. --allow-super is
rejected with --no-super or --daemon.
C6: tls_client_identity_allowed now rejects a CN whose reported length
reached the buffer bound, so a truncated over-long CN cannot be matched
by a required --client-cn prefix.
Tests: an integration regression proving --force cannot replace a
destination directory without --allow-delete; standalone-default tests
for --copy-as refusal and (root-only) skipped device creation; a CLI
unit test for the new flag. The integration shared_server fixture opts
in with --allow-super so the existing root-only ownership/device/copy-as
tests continue to exercise the opted-in configuration. README and
RSYNC_COMPAT document the flag and the force/delete gating.
Extend _snapshot_tree to record mode, inode, xattrs, directories and
special nodes, and add coverage proving a server-contacting --dry-run
leaves the destination structurally identical for --delay-updates,
--backup, symlinks, hardlinks, FIFOs, and daemon modules (including a
read-only module). Add a regression test for the --read-batch --dry-run
refusal and for a missing/non-directory receive root failing a dry-run
exactly like a real run.
Fix stale version comments (2.20.0/633 -> 2.21.0/637) and RSYNC_COMPAT's
current --protocol value, and add a unit assertion that
--server-port/--port (and --server-host) set the dry-run routing bit.
--dry-run now handshakes with a remote/daemon receiver and reports what
WOULD transfer/skip based on receiver state, mutating nothing on either
side.
- Serialize Config.dry_run into the wire config frame and append
STATUS_DRY_RUN_TRANSFER to the status enum (no renumbering); bump
PROTOCOL_VERSION/CMake VERSION/CHANGELOG/golden wire to 2.21.0.
- Receiver: receive_incremental_check_ex runs the normal read-only
decision and answers STATUS_OK (skip) or STATUS_DRY_RUN_TRANSFER
(would transfer) with no basis materialization/append/delta/full
transfer. All mutation sites are guarded by !dry_run: file store,
manifest deletes, --mkpath root creation, --delay-updates staging,
publication, directory-time application, and outcome acks.
- Client: send_dry_run_remote connects, sends the config, checks each
regular file and prints the would-transfer set + trailer; no file data
or delete manifest is sent. Plain local destinations keep the
client-side manifest.
A1: daemon refuses every client-chosen ownership/super-user request
(--numeric-ids/--chown/--usermap/--groupmap/--fake-super/--copy-as/--super)
unless the selected module opts in with 'client owner = yes'.
A2: fake-super owner replay requires an explicit ownership identity policy.
A3: --super no longer implies --numeric-ids (ownership stays opt-in).
A5: a failed --copy-as chown marks the entry failed instead of reporting
success with the wrong owner.
Add the receiver-side --super / --no-super tri-state (Config->super_mode)
under the safe-subset + clear-refusal privilege model: FastSync never
elevates privileges, it only permits super-user attempts that are already
confined fd-relative below the authorized receive root.
- identity: privilege_super_permitted() gate (OFF=false, ON=true, AUTO follows
geteuid()==0); identity_apply_ownership/_link become no-ops when not
permitted; --super with no explicit identity policy implies raw numeric-id
preservation (explicit usermap/groupmap/chown/numeric-ids still win); warn
exactly once when --super is requested by a non-root receiver.
- file_receive: gate char/block device-node creation on the gate; FIFO/socket
handling is unchanged.
- wire: trailing super_mode int after the --iconv spec, validated 0..2 in
receive_privilege_options and validate_received_config; PROTOCOL_VERSION
2.17.0 -> 2.18.0; version-sensitive tests and docs updated.
- CLI: --super/--no-super parsed explicitly before the generic --no-* branch
(malformed --super=x rejected); usage text added.
- tests: config wire round-trip + invalid-value rejection, privilege-gate mode
unit test, CLI parse test, integration transfer + root-gated ownership
suppression/appliance tests.
- docs: RSYNC_COMPAT --super row + Wave E note, protocol mentions, README.
Force the receiver to apply the requested owner/group to every written
entry through the confined fd-relative identity path instead of switching
the process credentials (unsafe for the multithreaded receiver). An
unprivileged receiver refuses the transfer up front in server_module_gate,
before STATUS_OK, so no data is written with the wrong ownership.
- new Config fields copy_as_set/copy_as_uid/copy_as_gid + defaults
- identity_parse_copy_as (name/@N/* resolution, primary-gid default,
gid==uid fallback for numeric ids with no passwd entry); implies -M
- identity snapshot + highest-priority forcing in identity_resolve_targets
- identity_copy_as_refused() helper
- trailing config-frame block (presence int + two int32 ids, >=0 checked)
- PROTOCOL_VERSION 2.17.0 -> 2.18.0; version-sensitive tests updated
- unit tests for parse + wire round-trip/negative-id rejection
- integration TestCopyAs: unprivileged refusal + root chown assertion
- RSYNC_COMPAT.md --copy-as row updated (safe subset + divergence); README
protocol version refreshed
Review fixes for Phase 7 Wave D.
#1 (HIGH): STATUS_DIR_TIMES entries no longer create directories. A new
receiver-only File.dir_time_only flag marks dir-time entries; file_save_to_disk_full
short-circuits them as FILE_SAVE_SKIPPED before any device/dir branch, so the sink
still accumulates metadata into the deferred DirTimeList but creates nothing. Empty
source dirs stay untransferred (-a), -m/--prune-empty-dirs semantics are preserved,
and a pre-existing regular file/symlink at an empty-dir mirror path no longer aborts
the transfer. dir_time_list_apply fstatat()s the leaf (AT_SYMLINK_NOFOLLOW) and skips
absent/non-directory paths QUIETLY; only a real existing directory is stamped.
Also initialize File.dir_time_only in file_create() (uninitialised garbage otherwise).
#2 (MED): send_dir_times() chunks entries into repeated STATUS_DIR_TIMES frames of at
most MAX_MANIFEST_ENTRIES, matching the receiver's per-frame bound; the tautological
> INT_MAX check is gone.
#3 (LOW): dir_time_list_add() assigns each grown array right after its realloc (no
dangling) and advances capacity only after both succeed.
#4 (LOW): RSYNC_COMPAT.md -- STATUS_MKDIR carries metadata, dir times are transmitted
via STATUS_DIR_TIMES and applied at the end, empty dirs are still never created; -m
rationale, -O row and Wave D notes updated. Summary counts untouched.
#5 (LOW): integration tests for the three #1 scenarios (empty-dir non-creation under
-a and -a -m, collision non-abort), scanner test now covers empty-dir capture, and
test_file_restore_symlink_metadata asserts the positive apply path when supported.
PROTOCOL_VERSION stays 2.17.0; config-frame layout unchanged.
Wave D of Phase 7. Make -O/--omit-dir-times and -J/--omit-link-times real by
preserving directory and symlink times, and mark --secluded-args as an explicit
Impossible/Divergence no-op.
Wire: PROTOCOL_VERSION 2.16.0 -> 2.17.0. Adds a terminal STATUS_DIR_TIMES frame
(int count + (wire path, metadata) pairs) sent after all file data and the
optional delete manifest. STATUS_MKDIR also carries metadata for --dirs entries.
Config-frame layout is unchanged.
Sender: the recursive scanner captures every traversed source directory (both
DirectoryScanner and the parallel scanner root + workers, appends mutex-guarded)
into a shared list; the single-threaded and -m paths transmit it last.
Receiver: a DirTimeList accumulates received directory metadata and applies it
with fd-relative no-follow utimensat only at the very end -- after all children,
after the commit-style --delete, and after --delay-updates publication -- in the
single-threaded success frame and in server.c after the -m threads join. -O skips
the application. Symlink metadata is applied at link creation with
utimensat/fchownat/fchmodat AT_SYMLINK_NOFOLLOW; -J suppresses only link times.
identity_apply_ownership_link shares the identity resolver with the fd path.
Docs: -O/-J rows -> Implemented; --secluded-args -> Impossible/Divergence;
--protocol accepted/rejected values and Phase-6/7 notes updated.
Tests: unit (scanner dir capture, DirTimeList apply, symlink metadata, protocol
version values) and integration (dir mtime round-trip + -O, symlink mtime
round-trip + -J, independent suppression), parameterized over single/multithread.
- fake_super_restore_fd now sanitizes mode like metadata_mode (never grants
S_IWGRP|S_IWOTH; 0666 -> 0644), fixing a privilege regression
- --sparse takes precedence over --preallocate (skip posix_fallocate when
sparse) so holes are not re-allocated; docs corrected
- --partial retention disabled under --no_replace (ignore/existing) and only
marks write_attempted after the write begins (no empty-temp retention)
- accept --block-size=SIZE / --delta-block=SIZE inline forms; neutral messages
- fake-super EPERM/EACCES skipped silently (docs aligned); EINVAL still logged
- sparse unit test now memcmp's the full buffer; TestBlockSize integration keeps
the destination basis so delta is genuinely exercised
- unit 37/37, cppcheck 0, clang-format 0
- write_all_sparse: skips all-zero runs >= 4096 bytes via lseek(SEEK_CUR) and
ftruncates the final size, wired into the atomic temp+rename and --inplace
paths with no wire change (full image already in memory).
- --partial retention: on a save failure after the temp held data, rename the
already-written temp to the destination path (best-effort; falls through to
unlink; never retains when --partial is off) so --append/--append-verify can
resume; tested by forcing futimens EINVAL with an out-of-range nsec.
- --block-size aliases --delta-block; verified config->delta_block_size is
honored by the delta engine end-to-end (unit + integration tests).
- fake_super_restore_fd: parses and re-applies user.fastsync.stat fd-relative
(fchown best-effort/non-root skipped, fchmod, futimens); a save under
--fake-super now both records and re-applies.
- -N/--crtimes and --stderr=client promoted to a new 'Impossible/Divergence'
status bucket (Summary: 136/2/4/3/2 = 147).
- cppcheck/clang-format clean; unit 37/37; integration 407 passed.
- revert over-eager replacement of setfacl -m in test_features.py
- use --chunk-serialization (+ set dirs) in the two append/append-verify
chunk-serialization rejection unit tests so they exercise the real check
- rename archive-negation integration test (--no-preserve is inert under
archive because devices/specials force metadata)
- update stale (-c)/(-m)/(-s)/(-f) display labels and RSYNC_COMPAT -c/-m refs
- document the --no-perms negation limitation in the Wave A note
-c -> --checksum, -m -> --prune-empty-dirs, -M -> --remote-option,
-f -> --filter, -s -> --secluded-args, -p -> --perms, -T -> --temp-dir;
-a/--archive is now real rsync -rlptgoD (links+metadata+devices+specials).
FastSync's own flags moved to long-form-only or new shorts:
-j/--threads (multithreading), --preserve (metadata), --sendfile,
--chunk-serialization, --timeout, --ssh-port. Client-side only; the
wire config fields are unchanged (no PROTOCOL_VERSION bump). The server
keeps -p as its port. Docs (README, RSYNC_COMPAT summary 129->132) and
unit/integration tests updated. 37/37 unit, 400-pass integration.
TapTap
opencode