--info=mount now prints rsync's mount-point skip line (matching rsync
3.4.1, which emits it for repeated -xx and drops the mount-point dir);
--info=stats enables the same block as --stats; -x is repeatable.
--stats counts traversed directories for the Number of files breakdown
even when no directory metadata is captured (-r without -t/-p).
--debug enables real output for flist/del/hash/deltasum/recv/filter/send
at their natural FastSync events (synthetic categories stay inert).
--stats and --debug rows keep their documented residual status.
Transmit the complete --delete-during/--delete-delay per-directory plan
set before the first data frame, so a mid-transfer abort has already
applied every planned removal like rsync's generator; completed runs are
unchanged. Route -d/--dirs through the same per-directory plans: the
generator records only directories whose direct children it enumerated,
so extras directly inside a listed directory are removed while an
untraversed subdirectory's mirror is shielded (rsync's -d DIR/ --delete).
Also shields a -x mount point's untraversed destination content.
- plain --delete with no timing flag now selects delete-during (progressive
deletion, matching rsync and avoiding the full old+new tree peak)
- new long-only FastSync --delete-commit restores the old atomic behavior
(delete only after the whole transfer succeeds); timing-identical to
--delete-after, implemented via the same wire bool
- timing flags are mutually exclusive; --delete-commit conflicts with other
timings; --delete-before/--delete-during rows reworded per Phase-0 probes
- CHANGELOG migration note; tally unchanged 116/14/27
- when --progress/--info=progress is requested, a metadata-only pre-scan
builds the full file-list total and directory names so the to-chk
denominator counts every regular/dir/link/special entry like rsync
- per-directory/symlink/special name lines emitted; sequential and --threads
- reuses the --delete-during/delay pre-scan when present; non-progress runs
take no extra pass
- --progress stays a caveat (emission order still differs); single-file output
remains byte-identical
- PROTOCOL_VERSION 2.27.0 -> 2.28.0; STATUS_STATS gains literal_bytes and
the created reg/dir/link/special counters (golden wire updated)
- receiver reports which destination entries it newly created, including
implicitly-created parent directories below the logical transfer root, so
Number of created files carries rsync's per-type breakdown
- Literal data is now exact for a delta transfer (receiver counts the literal
fragments it stored)
- differential-tested vs rsync 3.4.1 for fresh-create, update and delta
- -n/--delete sends the same protected/size-skipped/scope as a real run, so
the read-only would-delete walk no longer over-reports (row -> caveat)
- --delete-delay charges --max-delete on actual removals and recursively
re-scans a refilled deferred directory at commit; independent deferred cap
- --info=name emits the leading ./ root line and name2 'is uptodate' lines
- differential tests promoted from residual pins to rsync parity assertions
- --delete-delay: state that the reported count advances on actual removal
while --max-delete is charged at plan/snapshot time (defer_add/planned).
A new differential shows rsync instead charges on actual removals and
recursively removes a queued directory, so the row moves to Caveat
(matrix 111/13/33) and the residual is pinned by tests.
- Add a deterministic unit test (plan-time budget charge), a FastSync
integration test (byte-barrier refill + --max-delete), and an rsync
differential for a refilled deferred directory.
- Soften the --fuzzy summary: the tree is byte-exact by design, so it is
pinned by the threshold suite, not a byte-level differential.
- README: describe what -m parity actually selects; fix the allowlist
example to the real max_delete entry.
- xdist-safe delete-timing fixture names (timing and --threads mode).
- Renumber the duplicate HANDOFF item 9 to 10; add the missing final
newline to test_checksum.c.
- Expose ignore_errors_allows_delete and unit-test the deletion gate
without a privileged source directory; update the stale deleted-count
doc comment.
No production behavior changes.
- cli: remove UB in --bwlimit scaling (range-check the double product before
casting, drop atoi for the +/-1 form) and add huge/boundary unit tests
- test: widen the CI throttle wall-clock band to [1.5, 4.5]s with a 2s
cross-tolerance so a loaded runner cannot flake it
- log: drop the unused LOG_INFO_BACKUP bit; --info=backup is accepted-but-
silent like the other rsync-only categories
- client_send: remove the duplicate delete_display_path forward declaration
- utils: add non-allocating utils_strip_transfer_root and use it from
scanner_note_nonreg and delete_display_path (was duplicated logic)
- scanner: lstat() instead of stat() when re-reading an empty dir's metadata
- file: drop the no-op else-if and the redundant ELOOP arm in
file_ensure_directory_secure (symlinks are refused anyway)
- format/stats: document literal_data as whole-file accurate (delta upper
bound) instead of claiming literal bytes sent
- docs: refresh stale protocol 2.26.0 labels to 2.27.0
- Wire: config frame gains report_deletes (protocol 2.26.0 -> 2.27.0); the
receiver lists actually-removed paths in the STATUS_STATS path list, so the
sender prints rsync's `deleting PATH` / `*deleting PATH` lines for a real
--delete run (and -i/out-format). Observers threaded through the manifest,
missing-args and per-directory delete engines; golden wire len/hash updated.
- bwlimit: throttle now paces like rsync 3.4.1 -- ~100ms burst capacity and the
sleep is no longer credited as refill, so 4 MiB at 1024/2048 KiB/s matches
rsync within ~4% (was ~2x too fast).
- --bwlimit: faithful port of rsync 3.4.1 parse_size_arg (default KiB/s,
binary K/M/G/T/P, decimal KB/MB, KiB/MiB, decimals, 0 = unlimited, 512-byte
floor, (size+512)/1024 quantization). Unit tests + docs.
- --info: wire del/remove/name/flist/nonreg/progress to real FastSync events in
rsync's line format (deleting PATH, sender removed NAME, name lines,
'sending incremental file list', skipping non-regular file "NAME"); name no
longer aliases copy; --info=progress drives the progress path and report_stats.
- --ignore-errors: match rsync's default -- a source I/O error skips deletion
unless --ignore-errors, while the readable tree still transfers and the run
exits 23. Covers all delete timings and both send paths.
- --iconv now matches rsync's push direction: the destination charset is the
client spec's REMOTE half, so a default receiver writes wire names verbatim;
a server's own --iconv LOCAL overrides it (daemon charset analog). Updated
unit + integration tests and added a default-server differential gate case.
- Empty-directory emission is gated behind a new ScannerOptions.emit_empty_dirs
set only by the real sender, so low-level scanner helpers keep the historical
file-only list.
- --temp-dir reclassified to Divergent: relative dirs match rsync exactly
(resolved under the destination), but an absolute path is deliberately
rejected by the confined receiver; differential test added.
- Docs/tally: 109 Parity / 22 Caveat / 25 Divergent.
- Recursive scans emit a directory entry for every traversed directory that
produced no transferred child, so empty source dirs (and dirs emptied by
filtering) are recreated like rsync; -m prunes them, --files-from/--list-only
never emit implicit dirs.
- A directory entry now replaces a destination regular file (rsync removes the
non-directory) instead of aborting; confined to the secure parent fd.
- -R --no-implied-dirs --files-from: stop refusing a listed file whose parent
is not listed; create the implied parent with default attributes (no source
metadata is captured for it), matching rsync 3.4.1.
- Differential gate: drop min_size/empty_dirs_recursive/dirs_plain allowlist
entries (dirs_plain now hands FastSync the same trailing-slash source as
rsync); add differential test for the files-from implied parent.
- Docs: -d row -> Parity, tally 108/24/24.
No wire change (PROTOCOL_VERSION stays 2.26.0).
- --delete-delay: count/track only entries actually removed; a directory
refilled before commit (ENOTEMPTY) no longer inflates Number of deleted
files or the --max-delete budget (unit + integration + rsync differential).
- --stats: per-type Number of files breakdown; only stored regular files
count as transferred; transferred/literal byte totals and Total file size
(symlink target lengths) now match rsync for whole-file transfers.
- --progress: print the leading ./ root line and include the root entry in
the to-chk denominator (single-file output byte-identical to rsync).
- --out-format %C: use the selected transfer checksum and render every
algorithm exactly like rsync; checksum_digest_file gains md4/sha1/none.
Reclassify --out-format to Divergent (protocol-specific %b/delta-%c).
- Docs: RSYNC_COMPAT tally 107/25/24, HANDOFF update. No wire change.
Address findings from the four-agent review of PR #298:
- file_create: zero the new File.matched_bytes. It was uninitialized
malloc memory, so the receiver could sum a garbage value into
STATUS_STATS "Matched data" (nondeterministic --stats divergence and
an uninitialized-heap disclosure on the wire).
- send_append: load the source into memory before hashing/copying the
prefix and tail. Files >64 MiB without compression (and --sendfile
runs) are streamed without loading, so --append/--append-verify
dereferenced a NULL data->data and crashed.
- filter_file_append: clamp the rollback to the surviving rule count.
A "clear" rule in a merge file frees every rule including the
caller's; the old rollback rewound count to rules_before and
resurrected freed pointers for a double free / UAF. Also roll back
when set_rule_owner fails instead of leaving owner-less rules.
- filter_rule_parse: reject the xattr-name filter modifier (x), which
was parsed and silently reinterpreted as a filename rule (affecting
what --delete protects). The p modifier stays accepted (existing
grammar test).
- Remove two dead functions: compression_default_algo and
change_render_itemize_code.
- tests: free ctx->would_delete in the two test_multiprocessing manual
teardowns (ASan leak, 1648 bytes/run).
- docs: correct the RSYNC_COMPAT/HANDOFF tally (156 rows: 106/27/23),
downgrade --info/--debug to caveat with their silent categories, add
%C-vs-xxh64 and --delete-delay count caveats, refresh stale xattr
mode comments, and document -p special-bit (setuid/setgid/sticky)
parity plus its mitigations.
Blockers addressed together (shared scanner/delete-plan plumbing):
* #10: an empty in-scope source directory produced no plan keep entry, so the
receiver deleted the destination directory itself. The scanner now records
every traversed directory into a delete-plan sink, the plan sender keeps them,
and any directory whose plan the data stream never triggered is emitted after
the data so its extras are still removed. Differential tests cover
--delete-during and --delete-delay.
* #8: an invalid per-directory filter file was silently ignored when an earlier
merge file in the same directory existed; key the failure off the error text
(both sequential and parallel scanners) and fail the scan.
* #9: -R + --files-from receiver-protect rules recorded the source-relative
path; record the bare relative wire path in both scanners so the protected
destination mirror survives --delete.
* #5: the STATUS_STATS would-delete parser now validates each retained path and
enforces the shared MAX_MANIFEST_BYTES budget, and the --out-format dry-run
delete line is escaped like the itemize line.
* #11: drop the unused DELETE_PLAN_MAX_NAMES macro, log the delete-limit
warning once per session, roll back dir-merge names from a per-directory file
that fails to parse, and guard every filter error snprintf against err==NULL.
#10 leaves the empty directory itself kept and its extras removed, matching
rsync's final state on both per-directory timings.
The -R prefix marker installed in synced_dirs was discarded when finalizing
the per-directory delete sender (--delete-during/--delete-delay), so the
up-front root plan was the receive root '.', whose keep list only held the
first prefix component. The receiver then deleted destination content
outside the transferred prefix (e.g. unrelated/keep.txt), a data-loss bug;
rsync keeps it.
Confine the walk to the -R prefix: send that prefix's plan as the root plan,
only transmit plans at or below it, and never emit the receive root plan for
a scoped run. Add a differential test covering both --delete-during and
--delete-delay.
- Only honor the --delete-missing-args exact paths when the server's
--allow-delete policy left delete_missing_args set.
- -d/--dirs does not recurse, so a per-directory plan would carry no child
information and could delete the contents of an untraversed directory; fall
back to the whole-tree end-of-transfer commit for that mode.
A general -R transfer places its files below the reconstructed prefix, so
marking the whole receive root as the delete scope deleted unrelated
sibling directories (data loss; rsync keeps them). Use the prefix itself
as the root marker when it is non-empty, in both the single-threaded and
multithreaded pipelines.
rsync prints the --stats block (with the (DRY RUN) suffix) for -n; route
the dry-run path through report_transfer_stats using the wire counters and
the STATUS_STATS receiver report.
The receiver emits the wire-stats frame before the per-file acks and the
terminal status; the client must consume it in that order or a combined
--stats --remove-source-files run desynchronizes.
Replace the aggregate stderr progress with rsync 3.4.1's per-file progress
block (name, 32 KiB first frame, final frame with (xfr#N, to-chk=X/Y)).
Add differential tests against real rsync for --out-format %C/%b, the
--progress frames, selected --stats lines and -n --delete lines.
Add the STATUS_STATS end-of-transfer receiver report (matched/deleted
counters plus a would-delete path list) behind the report_stats wire
bool, and a read-only delete_extras_list walker. --stats now renders
true wire byte totals and the receiver-reported deleted count; a
server-contacting -n --delete prints transfer-relative '*deleting' lines
matching rsync's itemize layout.
- Compare --delete-during/--delete-delay final state against rsync 3.4.1.
- Force a mid-transfer failure through a byte-slicing proxy: --delete-during has
removed the processed directory's extra, --delete-delay has not.
- Create a destination entry while the transfer is in flight: it survives
--delete-delay's snapshot but is removed by --delete-after's fresh end scan.
- Cover the --delete-delay type-conflict case now matching rsync.
Stream one delete plan per source directory from sender to receiver instead of
a single whole-tree keep-set manifest:
- --delete-during applies each directory's extras as its plan arrives, before
that directory's data (rsync's generator-order deletion).
- --delete-delay snapshots each directory's extras while the plan arrives and
commits the removals only after a fully-successful transfer, so files created
after the scan survive (matching rsync's delete-delay, not delete-after).
- Type conflicts (a destination file blocking a source directory, or vice
versa) are cleared immediately in both modes, so the nested write succeeds.
The plan carries the destination-relative directory, its kept child directory
names and its kept child file names; the first frame also carries the global
protected prefixes, size-skipped prefixes and --delete-missing-args paths.
--delete-before keeps the existing whole-tree early manifest; plain --delete and
--delete-after keep the end-of-transfer manifest commit.
Preserves the existing safety surface: protected/size-skipped prefixes and the
--delay-updates/basis skips are honored at any depth, deletion is scoped to the
synchronized directories (--files-from), MAX_SERVER_DELETE_COUNT and
--max-delete (partial + exit 25) are shared across plans, symlinks are never
followed, and paths are confined to the receive root.
Reconstruct the destination-relative prefix from the source spec outside
--files-from: cut at rsync's first '/./' (or a leading './'), normalize
later '.' components and trailing slashes. Apply it as each File's
send_path in the sequential and parallel scanners (root and worker paths,
files, one-file-system mount entries and directory-time capture).
Transmit the metadata of implied parent directories (prefix components
above the source root), suppressed by --no-implied-dirs, so parent attrs
match rsync in both the single-threaded and -m pipelines.
Bump PROTOCOL_VERSION to 2.25.0 and append a report_stats bool to the
config frame, add a STATUS_STATS status, and add process-wide wire byte
counters (protocol_bytes_written/read) for the client.
Render the rsync 3.4.1 --out-format %b (wire bytes sent) and %c (wire
bytes read back) tokens from per-file counter deltas, and %C (whole-file
xxh128 checksum, seed 0) via a new streaming checksum_digest_file().
Address review findings on feat/rsync-parity:
- confine --temp-dir below the receive root (reject absolute/.. like
backup-dir/partial-dir); keep EXDEV non-atomic fallback
- floor server session I/O deadlines at SERVER_IO_TIMEOUT_SEC (60s) and
install it on the socket layer at startup (slow-loris)
- charge each --delete-missing-args directory removal once and clamp the
extras-walk remaining budget so it can never underflow past --max-delete
- normalize --compress-choice=auto to zstd client-side and accept it on
receive so auto transfers no longer fail
- map received --max-alloc=0 to MAX_SERVER_ALLOC (receive path only)
- zero File.dest_state; include log-file-format in report_dest_info;
add STATUS_DELETE_LIMIT name; recognize --skip-compress as a
separate-value option; OOM-guard send_list_only root entry; drop the
dead -M= branch; record the bare relative protected prefix for -R
size-prunes in both scanners; refresh delete-manifest comment
- pin the rsync tarball sha256 and bump integrator image to v11
Tests: temp-dir rejection/relative/cross-device, server timeout floor,
delete-missing dir budget regression, compress-choice=auto e2e,
max-alloc=0 receive mapping, dest_state, report_dest_info modes,
skip-compress dash value, -M short forms, -R root size-prune mirror
protection (rsync 3.4.1 confirmed).
- Scope the --delete extras walk to directories synchronized by the
transfer: add a synchronized-directory section to the delete manifest
(protocol 2.23.0) so --files-from subsets no longer delete untransmitted
paths outside listed directory subtrees (data-loss fix).
- Separate --max-size/--min-size prune protection from --delete-excluded so
size-pruned source mirrors survive (rsync parity).
- Unlink extraneous destination symlinks instead of skipping them.
- Make --max-delete partial (delete up to N, skip the rest) and exit 25;
accept negative values as unlimited.
- Draw --delete-missing-args deletions from the shared --max-delete budget.
- Honor --force during --delay-updates publication.
Add unit and integration regression tests; update the pinned config wire
golden and version strings for the 2.23.0 manifest/status additions.
- #286: --numeric-ids is a mapping modifier only; it no longer activates
chown by itself (identity_active_enabled/owner/group predicates), and
--fake-super stores the resolved mapping instead of real-chowning.
- #286: apply owner/group to directories via the deferred directory
metadata path; capture+transmit+apply directory xattrs/ACLs (-aX/-aA),
including default ACLs, in STATUS_MKDIR/STATUS_DIR_TIMES.
- #294: --usermap/--groupmap support inclusive ranges, '*', empty FROM
(unnamed ids), and receiver-side TO name resolution; --chown mixing with
a same-side map is rejected like rsync.
- Protocol 2.22.0 -> 2.23.0 (map wire entry gains from_hi + to_name;
dir frames gain a bounded xattr block).
#291:
- Compile --exclude/--include/--exclude-from/--include-from into the SAME
ordered rule list as --filter/-f (first match wins), so the common
`--include='*.txt' --exclude='*'` idiom and include-alone semantics match
rsync. The legacy per-kind scanner arrays are no longer applied.
- -x/--one-file-system emits the cross-device mount-point directory entry
(empty) instead of dropping it, in both the sequential and parallel scanners.
- Stop passing the legacy arrays to the scanner; document -f is --filter.
#292:
- New src/shared/format.c/.h: rsync "big_num" (comma-grouped integers) and
decimal -h human sizes, %M/%t timestamp, and the STATUS_DEST_INFO codec.
- Receiver answers each STATUS_CHECK with a pre-transfer destination snapshot
(new report_dest_info wire field + STATUS_DEST_INFO, PROTOCOL_VERSION
2.23.0) so the sender can render true itemize columns.
- Itemize now emits rsync-correct update/type chars and c/s/t/p/o/g columns
for files, dirs, symlinks and hard links, comparing size/time/perms/owner/
group against the reported destination.
- --out-format gains %i %n %f %l %b %M %t %o %p %B %U %G %L; %f is the
relative display path, %M the YYYY/MM/DD-HH:MM:SS form, %b the literal
bytes sent.
- --list-only prints transfer-relative names, directory entries and ls-style
grouped sizes.
- --stats prints rsync's multi-line block on stdout; -h uses decimal units.
Tests: unit tests for the filter ordering, format primitives, itemize
columns; integration + differential tests against real rsync 3.4.1 for
itemize/out-format/list-only/selection and -x. Golden wire len/hash and
protocol version strings updated for 2.23.0.
Split FastSync's single use_metadata bundle into four independent rsync-parity attributes: preserve_perms, preserve_times, preserve_owner, preserve_group. use_metadata is now a derived transport bit (config_derived_use_metadata).
CLI: real -p/--perms, -t/--times, -o/--owner, -g/--group plus --no-perms/--no-times/--no-owner/--no-group (short and long) and --no-preserve; -a is now rsync -rlptgoD; --preserve = -pt; -A implies -p; -X does not; --chmod implies -p; --usermap/--groupmap/--chown imply owner/group per side; --incremental/--delta still auto-preserve unless negated.
Receiver: per-attribute FileAttrPolicy gating for files, dirs (modes applied at end of transfer), symlinks and specials; rsync -E read-bit rule; new files get source_mode & ~umask sanitized (no group/other write); per-side identity resolution; deferred directory metadata; batch dir-metadata replay; daemon modules without 'client owner = yes' no longer refuse plain -a but force super off (no ownership) with a warning.
Wire: PROTOCOL_VERSION 2.21.0 -> 2.22.0 (four appended config bools, golden 653 / 95530566005420798). FileMetadata/chunk/batch framing unchanged. Docs/CHANGELOG/CMake updated to 2.22.0.
- parse_ull_arg() rejects a leading '-'/'+' (strtoull would silently wrap
-1 to ULLONG_MAX) and --chunk-size/--delta-max enforce their upper bounds.
- Escape local untrusted paths before logging (client_send, scanner,
--filter rule, pattern-file reads) with output_escape(..., 8-bit mode).
- Read --exclude-from/--include-from through the bounded line reader.
- Open --log-file with O_NOFOLLOW|O_CLOEXEC, mode 0600, via open+fdopen;
create --write-batch with O_NOFOLLOW|O_CLOEXEC, mode 0600.
- Reject --dry-run together with --write-batch (dry-run must not write the
batch file), alongside the existing --read-batch/--only-write-batch rules.
Tests: signed/oversized numeric rejection, over-long pattern file, dry-run +
write-batch unit and integration coverage.
--dry-run --server-host=H (or TLS / source-bind --address) silently ran the
client-side manifest even though a real run contacts the server. Add a
client-only, never-serialized server_host_set bit (alongside the existing
server_port_set) and extend dry_run_targets_server so every explicit remote
target contacts the receiver.
Also make incremental_check return the dry-run code (4) only when the
session actually requested dry-run; a stray STATUS_DRY_RUN_TRANSFER from a
hostile/buggy peer is now a logged protocol error (STATUS_ERROR) instead of
falling through to send file data and desync. Both normal send_single_file
callers handle rc == 4 explicitly as an abort.
TapTap
opencode