Blockers addressed together (shared scanner/delete-plan plumbing):
* #10: an empty in-scope source directory produced no plan keep entry, so the
receiver deleted the destination directory itself. The scanner now records
every traversed directory into a delete-plan sink, the plan sender keeps them,
and any directory whose plan the data stream never triggered is emitted after
the data so its extras are still removed. Differential tests cover
--delete-during and --delete-delay.
* #8: an invalid per-directory filter file was silently ignored when an earlier
merge file in the same directory existed; key the failure off the error text
(both sequential and parallel scanners) and fail the scan.
* #9: -R + --files-from receiver-protect rules recorded the source-relative
path; record the bare relative wire path in both scanners so the protected
destination mirror survives --delete.
* #5: the STATUS_STATS would-delete parser now validates each retained path and
enforces the shared MAX_MANIFEST_BYTES budget, and the --out-format dry-run
delete line is escaped like the itemize line.
* #11: drop the unused DELETE_PLAN_MAX_NAMES macro, log the delete-limit
warning once per session, roll back dir-merge names from a per-directory file
that fails to parse, and guard every filter error snprintf against err==NULL.
#10 leaves the empty directory itself kept and its extras removed, matching
rsync's final state on both per-directory timings.
The single-threaded and -m receivers never populated ReceiverStats.matched_data
or .deleted_files, so --stats always printed 0 for both even when rsync
reported nonzero. Track the bytes reconstructed from the basis file while
applying a delta, and tally the delete-commit counts (manifest and
per-directory sessions) into the receiver stats. The -m pipeline now carries
its own stats/would-delete fields and emits the STATUS_STATS frame before the
terminal success, so --threads finally reports the counters and renders
-n --delete lines.
Also normalize the -n --delete would-delete enumeration's absolute basis
prefixes exactly like the real commit path (fixing an over-report) and fix the
basis_delete_relative off-by-one when the receive root is '/'. Unit tests
cover the root mapping and the basis protection; integration tests cover
matched/deleted stats for both receivers and the --threads dry-run delete
lines.
The -R prefix marker installed in synced_dirs was discarded when finalizing
the per-directory delete sender (--delete-during/--delete-delay), so the
up-front root plan was the receive root '.', whose keep list only held the
first prefix component. The receiver then deleted destination content
outside the transferred prefix (e.g. unrelated/keep.txt), a data-loss bug;
rsync keeps it.
Confine the walk to the -R prefix: send that prefix's plan as the root plan,
only transmit plans at or below it, and never emit the receive root plan for
a scoped run. Add a differential test covering both --delete-during and
--delete-delay.
Add tests/integration/test_codecs.py (accept/reject matrix and byte
differential against rsync 3.4.1 for every algorithm), extend the
checksum/compression unit tests with MD4/SHA1/none vectors and per-codec
round-trips, pin the new config golden (2.26.0), and update the version
strings and codec acceptance expectations.
A -R source prune (--exclude/--max-size) must record the destination wire
path below the reconstructed prefix so --delete protects it; the parallel
root scan and the sequential skip path used the source path instead.
A general -R transfer places its files below the reconstructed prefix, so
marking the whole receive root as the delete scope deleted unrelated
sibling directories (data loss; rsync keeps them). Use the prefix itself
as the root marker when it is non-empty, in both the single-threaded and
multithreaded pipelines.
Replace the aggregate stderr progress with rsync 3.4.1's per-file progress
block (name, 32 KiB first frame, final frame with (xfr#N, to-chk=X/Y)).
Add differential tests against real rsync for --out-format %C/%b, the
--progress frames, selected --stats lines and -n --delete lines.
- Compare --delete-during/--delete-delay final state against rsync 3.4.1.
- Force a mid-transfer failure through a byte-slicing proxy: --delete-during has
removed the processed directory's extra, --delete-delay has not.
- Create a destination entry while the transfer is in flight: it survives
--delete-delay's snapshot but is removed by --delete-after's fresh end scan.
- Cover the --delete-delay type-conflict case now matching rsync.
Stream one delete plan per source directory from sender to receiver instead of
a single whole-tree keep-set manifest:
- --delete-during applies each directory's extras as its plan arrives, before
that directory's data (rsync's generator-order deletion).
- --delete-delay snapshots each directory's extras while the plan arrives and
commits the removals only after a fully-successful transfer, so files created
after the scan survive (matching rsync's delete-delay, not delete-after).
- Type conflicts (a destination file blocking a source directory, or vice
versa) are cleared immediately in both modes, so the nested write succeeds.
The plan carries the destination-relative directory, its kept child directory
names and its kept child file names; the first frame also carries the global
protected prefixes, size-skipped prefixes and --delete-missing-args paths.
--delete-before keeps the existing whole-tree early manifest; plain --delete and
--delete-after keep the end-of-transfer manifest commit.
Preserves the existing safety surface: protected/size-skipped prefixes and the
--delay-updates/basis skips are honored at any depth, deletion is scoped to the
synchronized directories (--files-from), MAX_SERVER_DELETE_COUNT and
--max-delete (partial + exit 25) are shared across plans, symlinks are never
followed, and paths are confined to the receive root.
A trailing slash (or trailing '/.', or a bare '.') now lists the source's
immediate contents -- files transferred, subdirectories created empty --
without recursing, while a bare directory still sends only its own entry.
The -R prefix applies to the generated entries and to the root entry.
Bump PROTOCOL_VERSION to 2.25.0 and append a report_stats bool to the
config frame, add a STATUS_STATS status, and add process-wide wire byte
counters (protocol_bytes_written/read) for the client.
Render the rsync 3.4.1 --out-format %b (wire bytes sent) and %c (wire
bytes read back) tokens from per-file counter deltas, and %C (whole-file
xxh128 checksum, seed 0) via a new streaming checksum_digest_file().
- --chmod no longer implies --preserve-perms; repeated --chmod options
accumulate, and D/F/X selectors plus s/t special bits are supported with
rsync's exact parse_chmod/tweak_mode semantics.
- Stop masking group/other write and setuid/setgid/sticky: -p copies the
source mode exactly, no-p new entries use source&~umask, directories keep
setgid/sticky, and special nodes follow the same rules.
- Apply ownership before mode on the fd path so a chown cannot clear the
setuid/setgid bits -p just restored (rsync order).
- Update unit and integration tests, including differential checks against
rsync 3.4.1.
Address review findings on feat/rsync-parity:
- confine --temp-dir below the receive root (reject absolute/.. like
backup-dir/partial-dir); keep EXDEV non-atomic fallback
- floor server session I/O deadlines at SERVER_IO_TIMEOUT_SEC (60s) and
install it on the socket layer at startup (slow-loris)
- charge each --delete-missing-args directory removal once and clamp the
extras-walk remaining budget so it can never underflow past --max-delete
- normalize --compress-choice=auto to zstd client-side and accept it on
receive so auto transfers no longer fail
- map received --max-alloc=0 to MAX_SERVER_ALLOC (receive path only)
- zero File.dest_state; include log-file-format in report_dest_info;
add STATUS_DELETE_LIMIT name; recognize --skip-compress as a
separate-value option; OOM-guard send_list_only root entry; drop the
dead -M= branch; record the bare relative protected prefix for -R
size-prunes in both scanners; refresh delete-manifest comment
- pin the rsync tarball sha256 and bump integrator image to v11
Tests: temp-dir rejection/relative/cross-device, server timeout floor,
delete-missing dir budget regression, compress-choice=auto e2e,
max-alloc=0 receive mapping, dest_state, report_dest_info modes,
skip-compress dash value, -M short forms, -R root size-prune mirror
protection (rsync 3.4.1 confirmed).
A non-empty --delete-missing-args directory removed under --force/--delete
now has its contents deleted entry-by-entry through the budgeted walker, so
every deleted file/dir counts toward --max-delete exactly like rsync (a
capped run leaves the remaining entries and exits 25).
- Scope the --delete extras walk to directories synchronized by the
transfer: add a synchronized-directory section to the delete manifest
(protocol 2.23.0) so --files-from subsets no longer delete untransmitted
paths outside listed directory subtrees (data-loss fix).
- Separate --max-size/--min-size prune protection from --delete-excluded so
size-pruned source mirrors survive (rsync parity).
- Unlink extraneous destination symlinks instead of skipping them.
- Make --max-delete partial (delete up to N, skip the rest) and exit 25;
accept negative values as unlimited.
- Draw --delete-missing-args deletions from the shared --max-delete budget.
- Honor --force during --delay-updates publication.
Add unit and integration regression tests; update the pinned config wire
golden and version strings for the 2.23.0 manifest/status additions.
#289 checksum/compression:
- -c/--checksum now implies the incremental content quick-check (without
implying -t), so an unchanged file is skipped like rsync.
- --checksum-choice/--cc accepts xxh64/xxhash, xxh3, xxh128, md5 and auto;
md4/sha1/none and the two-name form are rejected by name.
- --compress-choice/--zc rejects lz4/zlib/zlibx by name (zstd/none/auto kept).
- --checksum-seed=0 is randomized per transfer and sent on the wire.
- --skip-compress uses rsync 3.4.1's default suffix list; slash separators and
dot-less suffixes are accepted.
- add --no-whole-file.
#295 timeouts/alloc/temp-dir:
- --timeout default 0 (disabled), --contimeout default 60; 0 disables both,
plus --no-timeout/--no-contimeout.
- --max-alloc=0 means no allocation limit (was rejected).
- --temp-dir accepts any dir, requires it to exist, and falls back to a
non-atomic copy on EXDEV instead of aborting.
#296 connectivity/daemon:
- -M/--remote-option is rejected for daemon/TCP destinations (SSH-only).
- --trust-sender clarified as receiver-local; server-path tests added.
- --stop-at accepts rsync's full date form (y-m-dTh:m etc.).
Adds unit and integration coverage; no wire-field change, PROTOCOL_VERSION stays
2.22.0.
- #286: --numeric-ids is a mapping modifier only; it no longer activates
chown by itself (identity_active_enabled/owner/group predicates), and
--fake-super stores the resolved mapping instead of real-chowning.
- #286: apply owner/group to directories via the deferred directory
metadata path; capture+transmit+apply directory xattrs/ACLs (-aX/-aA),
including default ACLs, in STATUS_MKDIR/STATUS_DIR_TIMES.
- #294: --usermap/--groupmap support inclusive ranges, '*', empty FROM
(unnamed ids), and receiver-side TO name resolution; --chown mixing with
a same-side map is rejected like rsync.
- Protocol 2.22.0 -> 2.23.0 (map wire entry gains from_hi + to_name;
dir frames gain a bounded xattr block).
#287:
- --safe-links: keep safe in-tree links AS symlinks and skip unsafe
(absolute or ".."-escaping) ones, mirroring rsync's unsafe_symlink().
Skipped links are recorded as delete-protected so --delete does not
remove their destination mirror (no silent data loss).
- --copy-unsafe-links: preserve safe links as symlinks and dereference
only unsafe ones.
- --munge-links: receiver-side rewrite storing /rsyncd-munged/-prefixed
targets (rsync parity), replacing the no-op #SYMLINK sender prefix.
- -l: store the target verbatim, including absolute and ".." targets
(rsync -l parity); the old receiver containment silently dropped them.
#288:
- --specials: recreate unix-domain sockets via mknod(S_IFSOCK), which
Linux permits unprivileged; keep EEXIST/EPERM skip behavior.
- --copy-devices: copy a device's content into a regular file when
requested; skip unrequested non-regular entries like rsync's default.
#291:
- Compile --exclude/--include/--exclude-from/--include-from into the SAME
ordered rule list as --filter/-f (first match wins), so the common
`--include='*.txt' --exclude='*'` idiom and include-alone semantics match
rsync. The legacy per-kind scanner arrays are no longer applied.
- -x/--one-file-system emits the cross-device mount-point directory entry
(empty) instead of dropping it, in both the sequential and parallel scanners.
- Stop passing the legacy arrays to the scanner; document -f is --filter.
#292:
- New src/shared/format.c/.h: rsync "big_num" (comma-grouped integers) and
decimal -h human sizes, %M/%t timestamp, and the STATUS_DEST_INFO codec.
- Receiver answers each STATUS_CHECK with a pre-transfer destination snapshot
(new report_dest_info wire field + STATUS_DEST_INFO, PROTOCOL_VERSION
2.23.0) so the sender can render true itemize columns.
- Itemize now emits rsync-correct update/type chars and c/s/t/p/o/g columns
for files, dirs, symlinks and hard links, comparing size/time/perms/owner/
group against the reported destination.
- --out-format gains %i %n %f %l %b %M %t %o %p %B %U %G %L; %f is the
relative display path, %M the YYYY/MM/DD-HH:MM:SS form, %b the literal
bytes sent.
- --list-only prints transfer-relative names, directory entries and ls-style
grouped sizes.
- --stats prints rsync's multi-line block on stdout; -h uses decimal units.
Tests: unit tests for the filter ordering, format primitives, itemize
columns; integration + differential tests against real rsync 3.4.1 for
itemize/out-format/list-only/selection and -x. Golden wire len/hash and
protocol version strings updated for 2.23.0.
The captured_config fixture assumed fault_dst already existed, relying on earlier tests in the same xdist worker creating it via _recover. Under --dist=load a worker can receive the capture test first, so the receiver rejected a missing destination root and the capture run failed. Create DEST_DIR in the autouse seeding fixture so test order/distribution cannot matter.
Split FastSync's single use_metadata bundle into four independent rsync-parity attributes: preserve_perms, preserve_times, preserve_owner, preserve_group. use_metadata is now a derived transport bit (config_derived_use_metadata).
CLI: real -p/--perms, -t/--times, -o/--owner, -g/--group plus --no-perms/--no-times/--no-owner/--no-group (short and long) and --no-preserve; -a is now rsync -rlptgoD; --preserve = -pt; -A implies -p; -X does not; --chmod implies -p; --usermap/--groupmap/--chown imply owner/group per side; --incremental/--delta still auto-preserve unless negated.
Receiver: per-attribute FileAttrPolicy gating for files, dirs (modes applied at end of transfer), symlinks and specials; rsync -E read-bit rule; new files get source_mode & ~umask sanitized (no group/other write); per-side identity resolution; deferred directory metadata; batch dir-metadata replay; daemon modules without 'client owner = yes' no longer refuse plain -a but force super off (no ownership) with a warning.
Wire: PROTOCOL_VERSION 2.21.0 -> 2.22.0 (four appended config bools, golden 653 / 95530566005420798). FileMetadata/chunk/batch framing unchanged. Docs/CHANGELOG/CMake updated to 2.22.0.
Bring README.md and RSYNC_COMPAT.md in line with the actual code/CLI and add
an automated guard so they cannot silently drift again.
Waves A-E:
- Correct stale compatibility claims: archive is `-rlptD` (owner/group are
opt-in via identity flags, not implied), and symlinks, hard links, xattrs,
ACLs and `--dirs` are implemented.
- Remove documented-but-nonexistent features: the six unread FASTSYNC_* env
vars, and `--client-cn` (server-only) from the client table.
- Repair the corrupted "Implementation Details" section (broken list numbering
and emphasis) and correct it against the source.
- Sync the client and server option tables with usage.c / server_cli.c, and
document server-contacting `--dry-run` (protocol 2.21.0).
- Hygiene: `# FastSync` heading, real build commands, consistent binary names,
runnable TLS examples, daemon module keys.
Also align the client `--help` / archive log wording and the RSYNC_COMPAT
archive rows with the opt-in ownership model, and add
tests/integration/test_readme_consistency.py (marked `ci`) asserting every
documented FASTSYNC_* var is read in src/ and every documented client/server
flag appears in the corresponding `--help`.
Follow-up to a237043 addressing three security/correctness re-review findings.
(1) MEDIUM: a server-contacting --dry-run with --compare-dest/--copy-dest/
--link-dest still read and hashed the basis file and compared it with the
client-supplied digest, a 1-bit content oracle. basis_match_find() gains a
hash_content parameter; the dry-run shortcut passes false and returns no
match without touching basis bytes, so an otherwise-matching entry is
reported as would-transfer. The real (non-dry-run) path is unchanged.
(2) LOW: xattr_capture_path() hardcoded preserve_acls=true, so the receiver's
hard-link copy fallback re-applied system.posix_acl_* even when -A was not
negotiated. The function now takes preserve_acls and members.* is
unaffected; scanner and receiver callers thread the negotiated flag.
(3) INFO: the --fsync --link-dest temp reopen now uses O_NONBLOCK and treats
a raced-in FIFO's ENXIO as a benign fsync-skip instead of blocking.
Tests: dry-run + basis unit test (asserts would-transfer, no content read) and
integration test; xattr capture ACL-filter test. Verified strict build, ASan,
clang-format, cppcheck, and the CI integration subset.
- parse_ull_arg() rejects a leading '-'/'+' (strtoull would silently wrap
-1 to ULLONG_MAX) and --chunk-size/--delta-max enforce their upper bounds.
- Escape local untrusted paths before logging (client_send, scanner,
--filter rule, pattern-file reads) with output_escape(..., 8-bit mode).
- Read --exclude-from/--include-from through the bounded line reader.
- Open --log-file with O_NOFOLLOW|O_CLOEXEC, mode 0600, via open+fdopen;
create --write-batch with O_NOFOLLOW|O_CLOEXEC, mode 0600.
- Reject --dry-run together with --write-batch (dry-run must not write the
batch file), alongside the existing --read-batch/--only-write-batch rules.
Tests: signed/oversized numeric rejection, over-long pattern file, dry-run +
write-batch unit and integration coverage.
Address confirmed receiver security findings B1-B6:
B1 (HIGH): add O_NONBLOCK to the three receiver read-opens that opened an
existing destination/basis entry before the S_ISREG gate
(incremental_check_open_destination, basis_open_regular, hardlink_read_source)
so a client-planted FIFO can no longer block the receive thread forever while
the post-open type gate still rejects it.
B2 (HIGH/MED): --inplace now fstatat(AT_SYMLINK_NOFOLLOW)-probes the target and
refuses any existing non-regular entry, opens with O_NONBLOCK, and re-checks
S_ISREG on the opened fd. This stops a FIFO from hanging the open and stops a
char/block device from being written directly (bypassing --write-devices).
B3 (MED): under --dry-run the incremental quick-skip no longer reads/hashes the
destination file for --checksum/--delta; it decides from metadata only and
reports would-transfer when the comparison is inconclusive, closing the
read-only-module content-hash oracle.
B4 (LOW): xattr_name_appliable() now gates the two system.posix_acl_* names on
preserve_acls (--acls), not the derived use_xattrs (--xattrs OR --acls). The
receiver drops (never applies) ACL entries when -A was not negotiated while
keeping user.* working for -X.
B5 (INFO): receive_manifest_section() charges a per-entry overhead against
MAX_MANIFEST_BYTES and the aggregate entry count across all three sections is
capped at MAX_MANIFEST_ENTRIES.
B6 (MED): data_charge_session() reserves decompressed/chunk-copy bytes against
the owning ProtocolSession (MAX_CONNECTION_MEMORY) and records them on the Data
so data_destroy() releases them via the Data.owner path. Applied to the
whole-file/append/delta decompression sites and chunk_deserialize() per-file
copies; a missing session owner degrades to the previous uncharged behavior.
Tests: FIFO destination/basis non-hang (with alarm), --inplace FIFO/device
refusal, dry-run no-read oracle test plus updated metadata-only dry-run tests,
ACL-without--acls drop, manifest total-entry cap, and chunk session charging.
C2: --force is deletion authority (an incoming regular file may remove a
non-empty destination directory tree, and --delete-missing-args may
remove a non-empty directory mirror), but it was not masked by the
operator --allow-delete policy. The handler now clears
config->force_delete unless --allow-delete was given, exactly like
--delete and --delete-missing-args.
C3: a standalone TCP / --stdio server running as root defaulted to
SUPER_MODE_AUTO, so an untrusted client --devices/--write-devices/
--super could make it create device nodes, write raw devices, or apply
client-chosen ownership. A privileged standalone receiver now forces
SUPER_MODE_OFF unless the operator opts in with the new server-only
--allow-super flag. Non-root receivers are unchanged, and the daemon
path keeps its per-module `client owner = yes` gate. --allow-super is
rejected with --no-super or --daemon.
C6: tls_client_identity_allowed now rejects a CN whose reported length
reached the buffer bound, so a truncated over-long CN cannot be matched
by a required --client-cn prefix.
Tests: an integration regression proving --force cannot replace a
destination directory without --allow-delete; standalone-default tests
for --copy-as refusal and (root-only) skipped device creation; a CLI
unit test for the new flag. The integration shared_server fixture opts
in with --allow-super so the existing root-only ownership/device/copy-as
tests continue to exercise the opted-in configuration. README and
RSYNC_COMPAT document the flag and the force/delete gating.
Extend _snapshot_tree to record mode, inode, xattrs, directories and
special nodes, and add coverage proving a server-contacting --dry-run
leaves the destination structurally identical for --delay-updates,
--backup, symlinks, hardlinks, FIFOs, and daemon modules (including a
read-only module). Add a regression test for the --read-batch --dry-run
refusal and for a missing/non-directory receive root failing a dry-run
exactly like a real run.
Fix stale version comments (2.20.0/633 -> 2.21.0/637) and RSYNC_COMPAT's
current --protocol value, and add a unit assertion that
--server-port/--port (and --server-host) set the dry-run routing bit.
--dry-run now handshakes with a remote/daemon receiver and reports what
WOULD transfer/skip based on receiver state, mutating nothing on either
side.
- Serialize Config.dry_run into the wire config frame and append
STATUS_DRY_RUN_TRANSFER to the status enum (no renumbering); bump
PROTOCOL_VERSION/CMake VERSION/CHANGELOG/golden wire to 2.21.0.
- Receiver: receive_incremental_check_ex runs the normal read-only
decision and answers STATUS_OK (skip) or STATUS_DRY_RUN_TRANSFER
(would transfer) with no basis materialization/append/delta/full
transfer. All mutation sites are guarded by !dry_run: file store,
manifest deletes, --mkpath root creation, --delay-updates staging,
publication, directory-time application, and outcome acks.
- Client: send_dry_run_remote connects, sends the config, checks each
regular file and prints the would-transfer set + trailer; no file data
or delete manifest is sent. Plain local destinations keep the
client-side manifest.
TapTap
opencode