- --chmod no longer implies --preserve-perms; repeated --chmod options
accumulate, and D/F/X selectors plus s/t special bits are supported with
rsync's exact parse_chmod/tweak_mode semantics.
- Stop masking group/other write and setuid/setgid/sticky: -p copies the
source mode exactly, no-p new entries use source&~umask, directories keep
setgid/sticky, and special nodes follow the same rules.
- Apply ownership before mode on the fd path so a chown cannot clear the
setuid/setgid bits -p just restored (rsync order).
- Update unit and integration tests, including differential checks against
rsync 3.4.1.
Address review findings on feat/rsync-parity:
- confine --temp-dir below the receive root (reject absolute/.. like
backup-dir/partial-dir); keep EXDEV non-atomic fallback
- floor server session I/O deadlines at SERVER_IO_TIMEOUT_SEC (60s) and
install it on the socket layer at startup (slow-loris)
- charge each --delete-missing-args directory removal once and clamp the
extras-walk remaining budget so it can never underflow past --max-delete
- normalize --compress-choice=auto to zstd client-side and accept it on
receive so auto transfers no longer fail
- map received --max-alloc=0 to MAX_SERVER_ALLOC (receive path only)
- zero File.dest_state; include log-file-format in report_dest_info;
add STATUS_DELETE_LIMIT name; recognize --skip-compress as a
separate-value option; OOM-guard send_list_only root entry; drop the
dead -M= branch; record the bare relative protected prefix for -R
size-prunes in both scanners; refresh delete-manifest comment
- pin the rsync tarball sha256 and bump integrator image to v11
Tests: temp-dir rejection/relative/cross-device, server timeout floor,
delete-missing dir budget regression, compress-choice=auto e2e,
max-alloc=0 receive mapping, dest_state, report_dest_info modes,
skip-compress dash value, -M short forms, -R root size-prune mirror
protection (rsync 3.4.1 confirmed).
A non-empty --delete-missing-args directory removed under --force/--delete
now has its contents deleted entry-by-entry through the budgeted walker, so
every deleted file/dir counts toward --max-delete exactly like rsync (a
capped run leaves the remaining entries and exits 25).
- Scope the --delete extras walk to directories synchronized by the
transfer: add a synchronized-directory section to the delete manifest
(protocol 2.23.0) so --files-from subsets no longer delete untransmitted
paths outside listed directory subtrees (data-loss fix).
- Separate --max-size/--min-size prune protection from --delete-excluded so
size-pruned source mirrors survive (rsync parity).
- Unlink extraneous destination symlinks instead of skipping them.
- Make --max-delete partial (delete up to N, skip the rest) and exit 25;
accept negative values as unlimited.
- Draw --delete-missing-args deletions from the shared --max-delete budget.
- Honor --force during --delay-updates publication.
Add unit and integration regression tests; update the pinned config wire
golden and version strings for the 2.23.0 manifest/status additions.
#289 checksum/compression:
- -c/--checksum now implies the incremental content quick-check (without
implying -t), so an unchanged file is skipped like rsync.
- --checksum-choice/--cc accepts xxh64/xxhash, xxh3, xxh128, md5 and auto;
md4/sha1/none and the two-name form are rejected by name.
- --compress-choice/--zc rejects lz4/zlib/zlibx by name (zstd/none/auto kept).
- --checksum-seed=0 is randomized per transfer and sent on the wire.
- --skip-compress uses rsync 3.4.1's default suffix list; slash separators and
dot-less suffixes are accepted.
- add --no-whole-file.
#295 timeouts/alloc/temp-dir:
- --timeout default 0 (disabled), --contimeout default 60; 0 disables both,
plus --no-timeout/--no-contimeout.
- --max-alloc=0 means no allocation limit (was rejected).
- --temp-dir accepts any dir, requires it to exist, and falls back to a
non-atomic copy on EXDEV instead of aborting.
#296 connectivity/daemon:
- -M/--remote-option is rejected for daemon/TCP destinations (SSH-only).
- --trust-sender clarified as receiver-local; server-path tests added.
- --stop-at accepts rsync's full date form (y-m-dTh:m etc.).
Adds unit and integration coverage; no wire-field change, PROTOCOL_VERSION stays
2.22.0.
- #286: --numeric-ids is a mapping modifier only; it no longer activates
chown by itself (identity_active_enabled/owner/group predicates), and
--fake-super stores the resolved mapping instead of real-chowning.
- #286: apply owner/group to directories via the deferred directory
metadata path; capture+transmit+apply directory xattrs/ACLs (-aX/-aA),
including default ACLs, in STATUS_MKDIR/STATUS_DIR_TIMES.
- #294: --usermap/--groupmap support inclusive ranges, '*', empty FROM
(unnamed ids), and receiver-side TO name resolution; --chown mixing with
a same-side map is rejected like rsync.
- Protocol 2.22.0 -> 2.23.0 (map wire entry gains from_hi + to_name;
dir frames gain a bounded xattr block).
#287:
- --safe-links: keep safe in-tree links AS symlinks and skip unsafe
(absolute or ".."-escaping) ones, mirroring rsync's unsafe_symlink().
Skipped links are recorded as delete-protected so --delete does not
remove their destination mirror (no silent data loss).
- --copy-unsafe-links: preserve safe links as symlinks and dereference
only unsafe ones.
- --munge-links: receiver-side rewrite storing /rsyncd-munged/-prefixed
targets (rsync parity), replacing the no-op #SYMLINK sender prefix.
- -l: store the target verbatim, including absolute and ".." targets
(rsync -l parity); the old receiver containment silently dropped them.
#288:
- --specials: recreate unix-domain sockets via mknod(S_IFSOCK), which
Linux permits unprivileged; keep EEXIST/EPERM skip behavior.
- --copy-devices: copy a device's content into a regular file when
requested; skip unrequested non-regular entries like rsync's default.
#291:
- Compile --exclude/--include/--exclude-from/--include-from into the SAME
ordered rule list as --filter/-f (first match wins), so the common
`--include='*.txt' --exclude='*'` idiom and include-alone semantics match
rsync. The legacy per-kind scanner arrays are no longer applied.
- -x/--one-file-system emits the cross-device mount-point directory entry
(empty) instead of dropping it, in both the sequential and parallel scanners.
- Stop passing the legacy arrays to the scanner; document -f is --filter.
#292:
- New src/shared/format.c/.h: rsync "big_num" (comma-grouped integers) and
decimal -h human sizes, %M/%t timestamp, and the STATUS_DEST_INFO codec.
- Receiver answers each STATUS_CHECK with a pre-transfer destination snapshot
(new report_dest_info wire field + STATUS_DEST_INFO, PROTOCOL_VERSION
2.23.0) so the sender can render true itemize columns.
- Itemize now emits rsync-correct update/type chars and c/s/t/p/o/g columns
for files, dirs, symlinks and hard links, comparing size/time/perms/owner/
group against the reported destination.
- --out-format gains %i %n %f %l %b %M %t %o %p %B %U %G %L; %f is the
relative display path, %M the YYYY/MM/DD-HH:MM:SS form, %b the literal
bytes sent.
- --list-only prints transfer-relative names, directory entries and ls-style
grouped sizes.
- --stats prints rsync's multi-line block on stdout; -h uses decimal units.
Tests: unit tests for the filter ordering, format primitives, itemize
columns; integration + differential tests against real rsync 3.4.1 for
itemize/out-format/list-only/selection and -x. Golden wire len/hash and
protocol version strings updated for 2.23.0.
Implement rsync 3.4.1 client-CLI parity:
- cluster boolean shorts (-av, -aAX, -rlpt) and accept attached values
(-B1048576, -essh, -Mfoo); add the -r, -b, -L and -B short aliases
(-r is a faithful no-op since FastSync is always recursive)
- stop OPT_NOOP (-s/--secluded-args, -r/--recursive) from swallowing the
next argv
- add inline --opt=value for every value-taking long option, including
--exclude/--include/--exclude-from/--include-from/--log-file (#291)
- accept --port on the server CLI in addition to -p (#296)
- reject unknown flags naming the flag and stating it is unsupported
Unit tests cover clustering, attached/inline values, the OPT_NOOP
argument-consumption fix and rejected shorts.
Add POSIX ACL/xattr tooling (acl, attr), zstd/lz4/xxhash dev libs and build rsync 3.4.1 from source so drop-in parity tests can run inside CI. Bump all workflow/agent image references v10 -> v11.
The captured_config fixture assumed fault_dst already existed, relying on earlier tests in the same xdist worker creating it via _recover. Under --dist=load a worker can receive the capture test first, so the receiver rejected a missing destination root and the capture run failed. Create DEST_DIR in the autouse seeding fixture so test order/distribution cannot matter.
Split FastSync's single use_metadata bundle into four independent rsync-parity attributes: preserve_perms, preserve_times, preserve_owner, preserve_group. use_metadata is now a derived transport bit (config_derived_use_metadata).
CLI: real -p/--perms, -t/--times, -o/--owner, -g/--group plus --no-perms/--no-times/--no-owner/--no-group (short and long) and --no-preserve; -a is now rsync -rlptgoD; --preserve = -pt; -A implies -p; -X does not; --chmod implies -p; --usermap/--groupmap/--chown imply owner/group per side; --incremental/--delta still auto-preserve unless negated.
Receiver: per-attribute FileAttrPolicy gating for files, dirs (modes applied at end of transfer), symlinks and specials; rsync -E read-bit rule; new files get source_mode & ~umask sanitized (no group/other write); per-side identity resolution; deferred directory metadata; batch dir-metadata replay; daemon modules without 'client owner = yes' no longer refuse plain -a but force super off (no ownership) with a warning.
Wire: PROTOCOL_VERSION 2.21.0 -> 2.22.0 (four appended config bools, golden 653 / 95530566005420798). FileMetadata/chunk/batch framing unchanged. Docs/CHANGELOG/CMake updated to 2.22.0.
Bring README.md and RSYNC_COMPAT.md in line with the actual code/CLI and add
an automated guard so they cannot silently drift again.
Waves A-E:
- Correct stale compatibility claims: archive is `-rlptD` (owner/group are
opt-in via identity flags, not implied), and symlinks, hard links, xattrs,
ACLs and `--dirs` are implemented.
- Remove documented-but-nonexistent features: the six unread FASTSYNC_* env
vars, and `--client-cn` (server-only) from the client table.
- Repair the corrupted "Implementation Details" section (broken list numbering
and emphasis) and correct it against the source.
- Sync the client and server option tables with usage.c / server_cli.c, and
document server-contacting `--dry-run` (protocol 2.21.0).
- Hygiene: `# FastSync` heading, real build commands, consistent binary names,
runnable TLS examples, daemon module keys.
Also align the client `--help` / archive log wording and the RSYNC_COMPAT
archive rows with the opt-in ownership model, and add
tests/integration/test_readme_consistency.py (marked `ci`) asserting every
documented FASTSYNC_* var is read in src/ and every documented client/server
flag appears in the corresponding `--help`.
- generate_bench_data now writes exactly (1-random_ratio)*target bytes of
genuinely compressible repeated content instead of only the small fixed
STRUCTURED_FILES set; measured composition is reported and --dry-run prints
it for scaling checks
- verify each transfer against the source (paths/sizes/byte compare) before
recording timing; add --no-verify; failed runs are counted as invalid
- correct p50/p95 with linear-interpolation percentile (was int(len*0.95))
- tc/netem: run tc directly as root, else sudo; clear error when tc/iproute2
is missing or qdisc setup fails; netem_reset is always safe
- build into dedicated build-bench/ via --build-dir (Release), never reconfigure
the user's build/
- parse --configs with shlex.split
- add MB/s throughput column and throughput_mbps JSON field
- add --warm incremental mode: untimed full seed then measure add/change deltas
Follow-up to a237043 addressing three security/correctness re-review findings.
(1) MEDIUM: a server-contacting --dry-run with --compare-dest/--copy-dest/
--link-dest still read and hashed the basis file and compared it with the
client-supplied digest, a 1-bit content oracle. basis_match_find() gains a
hash_content parameter; the dry-run shortcut passes false and returns no
match without touching basis bytes, so an otherwise-matching entry is
reported as would-transfer. The real (non-dry-run) path is unchanged.
(2) LOW: xattr_capture_path() hardcoded preserve_acls=true, so the receiver's
hard-link copy fallback re-applied system.posix_acl_* even when -A was not
negotiated. The function now takes preserve_acls and members.* is
unaffected; scanner and receiver callers thread the negotiated flag.
(3) INFO: the --fsync --link-dest temp reopen now uses O_NONBLOCK and treats
a raced-in FIFO's ENXIO as a benign fsync-skip instead of blocking.
Tests: dry-run + basis unit test (asserts would-transfer, no content read) and
integration test; xattr capture ACL-filter test. Verified strict build, ASan,
clang-format, cppcheck, and the CI integration subset.
Re-review findings on the C3/C4 hardening branch:
- --stdio is the SSH transport whose remote argv is composed by the client
(including via --remote-option), so accepting --allow-super there let a
client defeat the C3 secure default for a root receiver. Reject it at CLI
parse time (standalone TCP only) and force the process-global flag off for
--stdio as defense in depth. Correct the help text and README/RSYNC_COMPAT:
the --stdio argv is client-composed, super stays off, and a forced command is
needed if the default must hold.
- daemon_conf: the per-module 'hosts allow'/'hosts deny' call sites passed
module_name and replace in the wrong order, so multiple lines replaced
instead of appended and the empty-value error omitted the module name. Pass
(module->name, false) like the global keys; add a unit test for two
per-module allow/deny lines appending.
- tls: read the client CN via ASN1_STRING_to_UTF8 so an exactly-required-length
name is accepted and only actual over-length CNs are rejected.
- client_cli: capture errno before output_escape() in
read_patterns_from_file() so an over-long line is still reported as
EFBIG instead of the (possibly malloc-clobbered) errno.
- file_list: guard string_list_add() capacity doubling against
overflow (capacity > INT_MAX / 2), matching filter_rule_list_add();
callers already surface the false as a memory-allocation error.
- compression: ZSTD_isError() is true for ZSTD_CONTENTSIZE_UNKNOWN,
which made the 3x unknown-size fallback dead code. Test the
CONTENTSIZE_ERROR/UNKNOWN sentinels explicitly so unknown-size frames
reach the estimate path (still bounded by the existing hard limit)
while invalid frames are rejected. Known-size frames and the 100 MB
ceiling/overflow checks are unchanged.
- tests: add an unknown-content-size-frame decompression test.
Tests: ./build/tests and ./build-asan/tests all pass (42/42);
clang-format + cppcheck clean.
- parse_ull_arg() rejects a leading '-'/'+' (strtoull would silently wrap
-1 to ULLONG_MAX) and --chunk-size/--delta-max enforce their upper bounds.
- Escape local untrusted paths before logging (client_send, scanner,
--filter rule, pattern-file reads) with output_escape(..., 8-bit mode).
- Read --exclude-from/--include-from through the bounded line reader.
- Open --log-file with O_NOFOLLOW|O_CLOEXEC, mode 0600, via open+fdopen;
create --write-batch with O_NOFOLLOW|O_CLOEXEC, mode 0600.
- Reject --dry-run together with --write-batch (dry-run must not write the
batch file), alongside the existing --read-batch/--only-write-batch rules.
Tests: signed/oversized numeric rejection, over-long pattern file, dry-run +
write-batch unit and integration coverage.
protocol_receive_n_data_until() aborted on a signal-interrupted plaintext
read (and on SSL_ERROR_SYSCALL with errno==EINTR); retry both, matching the
send path and protocol_read_status_until(). Also clamp each SSL_write() to
INT_MAX so a >INT_MAX size_t request can never truncate into a partial write.
Read per-directory filter files through the bounded reader, guard the rule
list's capacity doubling against INT_MAX/2 overflow, and escape the local
directory path before logging a read failure.
Read list files through utils_getdelim_bounded() so a single multi-gigabyte
line can no longer force unbounded allocation; over-long entries fail with a
clear error. Also add the documented memchr() NUL-byte check (excluding the
NUL delimiter in NUL-separated mode).
Tests: an over-long entry is rejected with an 'exceeds' diagnostic.
Replace the recursive glob matcher with an iterative O(pattern*string)
dynamic program. The old recursion explored exponentially many paths for
overlapping '*'/'**' wildcards (e.g. '*a*a*...*b' against a long run of
'a'), a CPU DoS reachable from --exclude/--include patterns and
.rsync-filter. A differential fuzz against the original matcher confirms
identical results. Doc: has_path_traversal() is a lexical '..' check only.
Add utils_getdelim_bounded(): a getdelim-style reader that never allocates
beyond UTILS_MAX_LINE_LEN, used to cap untrusted list/filter line reads.
Tests: pathological glob completes quickly; bounded reader returns EFBIG on
an over-long record.
data_decompress_limited() looped while ZSTD_decompressStream() returned a
positive hint. A truncated frame keeps returning that hint with all input
consumed, so a malformed/truncated payload spun forever (CPU DoS). Detect
input exhaustion with an incomplete frame and fail via the existing cleanup,
skipping the check when the output buffer merely needs to grow first.
Add a fork+alarm regression test that truncates a valid frame and asserts
decompression returns NULL promptly.
Address confirmed receiver security findings B1-B6:
B1 (HIGH): add O_NONBLOCK to the three receiver read-opens that opened an
existing destination/basis entry before the S_ISREG gate
(incremental_check_open_destination, basis_open_regular, hardlink_read_source)
so a client-planted FIFO can no longer block the receive thread forever while
the post-open type gate still rejects it.
B2 (HIGH/MED): --inplace now fstatat(AT_SYMLINK_NOFOLLOW)-probes the target and
refuses any existing non-regular entry, opens with O_NONBLOCK, and re-checks
S_ISREG on the opened fd. This stops a FIFO from hanging the open and stops a
char/block device from being written directly (bypassing --write-devices).
B3 (MED): under --dry-run the incremental quick-skip no longer reads/hashes the
destination file for --checksum/--delta; it decides from metadata only and
reports would-transfer when the comparison is inconclusive, closing the
read-only-module content-hash oracle.
B4 (LOW): xattr_name_appliable() now gates the two system.posix_acl_* names on
preserve_acls (--acls), not the derived use_xattrs (--xattrs OR --acls). The
receiver drops (never applies) ACL entries when -A was not negotiated while
keeping user.* working for -X.
B5 (INFO): receive_manifest_section() charges a per-entry overhead against
MAX_MANIFEST_BYTES and the aggregate entry count across all three sections is
capped at MAX_MANIFEST_ENTRIES.
B6 (MED): data_charge_session() reserves decompressed/chunk-copy bytes against
the owning ProtocolSession (MAX_CONNECTION_MEMORY) and records them on the Data
so data_destroy() releases them via the Data.owner path. Applied to the
whole-file/append/delta decompression sites and chunk_deserialize() per-file
copies; a missing session owner degrades to the previous uncharged behavior.
Tests: FIFO destination/basis non-hang (with alarm), --inplace FIFO/device
refusal, dry-run no-read oracle test plus updated metadata-only dry-run tests,
ACL-without--acls drop, manifest total-entry cap, and chunk session charging.
C2: --force is deletion authority (an incoming regular file may remove a
non-empty destination directory tree, and --delete-missing-args may
remove a non-empty directory mirror), but it was not masked by the
operator --allow-delete policy. The handler now clears
config->force_delete unless --allow-delete was given, exactly like
--delete and --delete-missing-args.
C3: a standalone TCP / --stdio server running as root defaulted to
SUPER_MODE_AUTO, so an untrusted client --devices/--write-devices/
--super could make it create device nodes, write raw devices, or apply
client-chosen ownership. A privileged standalone receiver now forces
SUPER_MODE_OFF unless the operator opts in with the new server-only
--allow-super flag. Non-root receivers are unchanged, and the daemon
path keeps its per-module `client owner = yes` gate. --allow-super is
rejected with --no-super or --daemon.
C6: tls_client_identity_allowed now rejects a CN whose reported length
reached the buffer bound, so a truncated over-long CN cannot be matched
by a required --client-cn prefix.
Tests: an integration regression proving --force cannot replace a
destination directory without --allow-delete; standalone-default tests
for --copy-as refusal and (root-only) skipped device creation; a CLI
unit test for the new flag. The integration shared_server fixture opts
in with --allow-super so the existing root-only ownership/device/copy-as
tests continue to exercise the opted-in configuration. README and
RSYNC_COMPAT document the flag and the force/delete gating.
secret_is_legacy_hex indexed s[0..63] without first checking the string
length, reading out of bounds for a shorter secret. Require
strlen(s) == 64 before scanning, and add a unit test that short and
63-hex-digit secrets are rejected as ordinary malformed verifiers (never
misreported as legacy).
TapTap