chore(dev): fix nix-shell environment; document push-only direction

README.md

@@ -316,6 +316,11 @@ ssh user@host 'mkdir -p destination'
 ./build/client /path/to/source user@host:destination
 ```
 
+FastSync is **push-only**: the source (first argument) is always a local
+directory and only the destination may be remote. A remote source such as
+`client user@host:src ./local` (a "pull") is intentionally not supported; see
+[RSYNC_COMPAT.md](RSYNC_COMPAT.md#direction).
+
 ### TCP transfer
 
 Start the FastSync server:

RSYNC_COMPAT.md

@@ -641,6 +641,7 @@ now transmits targets (the prior behavior was broken/partial); its status moved
 - **Module selection & confinement:** the client requests a module with an rsync-style `host::module[/path]` destination. The module name crosses the wire as a trailing string on the config frame (bumping `PROTOCOL_VERSION` 2.14.0 → 2.15.0; the bump is required because the config-frame layout changed and the strict same-version handshake is what prevents a peer from desynchronizing on the new trailing field). The daemon looks the module up in ITS OWN config and uses the module's `path` as the authorized root through the exact same `configure_authorization` confinement the standalone server applies to `--destination-root` (`file_open_secure_parent`, `has_path_traversal`, `path_is_within`); the client never supplies the root, every client-chosen-ownership/super-user request is refused unless the module declares `client owner = yes` (the daemon's per-module opt-in, see below), and the operator `--no-super` veto forces super-user activities off for every daemon connection. The client's `/path` part is relative inside the module and is rejected if absolute or if it contains `..`. Unknown modules are refused before any data moves (the run fails cleanly at the config handshake). An absolute destination and a module request against a non-daemon server are also refused.
 - **`client owner` (client-chosen-ownership opt-in):** by default a daemon module refuses every request that would let the client pick an owner or ask for super-user activities — `--numeric-ids`, `--chown`, `--usermap`/`--groupmap`, `--fake-super`, `--copy-as`, and an explicit `--super` — at the config handshake (before `STATUS_OK`), because a daemon has no per-module opt-in for client-chosen ownership and any anonymous client could otherwise force arbitrary owner ids inside the module root. `client owner = yes` opts a single module in, allowing those requests within that module's root (a root standalone TCP listener honors them for its single operator-authorized root only when started with `--allow-super`; the flag is rejected with `--stdio`, whose client-composed remote argv must never opt back into super mode). Without the opt-in the daemon also forces super-user **device** activity off for that connection — char/block device-node creation (`--devices`) and `--write-devices` — even under the default `AUTO` mode, so a non-opted module can never be made to `mknod` or write a raw device; those entries are skipped (not refused) so an ordinary `-a` push still succeeds without device nodes. The opt-in does **not** lift the privilege requirement: `--copy-as` still needs a root receiver, and the operator `--no-super` veto still forces super-user activities off for every connection. The daemon logs a prominent startup warning for each `client owner = yes` module so the operator's deliberate choice is visible.
 - **`read only` safe default:** every network transfer FastSync currently supports is a push that writes under the module root, so a `read only` module refuses the connection (clear server log "module is read only"; the client exits non-zero, nothing is transferred). A future pull/list operation can be opened up when it exists; the knob is already stored.
+- **Direction — remote source / pull is intentionally unsupported:** FastSync is push-only. The first positional argument is always a **local** source directory and the second is the destination; only the destination is parsed for remote syntax (`user@host:path` SSH, `host::module[/path]` daemon). A remote source such as `fastsync user@host:src ./local` is deliberately **not** implemented: rsync has no pull flag (direction is positional), so supporting a remote source is an optional feature rather than a compatibility requirement, and it would require a protocol role reversal (server as sender, client as receiver) across both transports. FastSync documents this as an intentional limitation rather than a missing rsync option. <a id="direction"></a>
 - **`auth users` (A7 SCRAM-SHA-256 authentication):** a module that declares `auth users` requires the client to present credentials. The config frame carries ONLY the username; the daemon answers an auth-required module with `STATUS_AUTH_CHALLENGE` (PBKDF2 iteration count, 16-byte salt, 32-byte server nonce), the client answers with `STATUS_AUTH_RESPONSE` (fresh 32-byte client nonce + a 32-byte ClientProof), and the daemon accepts only when the proof verifies **and** the username is **on the module's `auth users` list** and has a store entry, replying `STATUS_AUTH_OK` with a 32-byte ServerSignature the client verifies before proceeding. Verification is constant-time over fixed 32-byte keys (the compare runs even for a miss), username membership uses a constant-time full-length scan, and an unknown/off-list user still receives a challenge and runs the same math against a dummy verifier: a deterministic per-username salt (`HMAC-SHA256(store dummy key, username)`), the store-wide uniform iteration count and dummy keys. Re-probing the same unknown username therefore yields an identical salt and iteration count while a different username yields a different salt, so there is no user-enumeration or timing oracle. The daemon logs the username but **never the password, proof or keys**. A module WITHOUT `auth users` stays open (legitimate rsync configuration); credentials sent to such a module are ignored. Read-only is orthogonal: even a correctly authenticated push to a `read only` module is still refused (all FastSync network transfers write). Fail-closed policy: a daemon whose config declares `auth users` on any module refuses to start unless a credential store was given (`--password-file` and/or `--early-input`); a missing or empty store is never silently treated as "open". A failed handshake (missing credentials, unknown/off-list user, wrong proof or malformed data) yields a single generic `STATUS_AUTH_FAILED` and the daemon closes before any data moves. The dummy key is persisted in an owner-only `<store_path>.dummykey` sidecar (auto-created on first load, mode 0600) so the dummy salt stays stable across daemon restarts, closing the restart-gated enumeration channel. The sidecar is secret material and must be protected like the credential store (owner-only 0600, included with the store in backups and rotation). It must be preserved across restarts for that guarantee; if it cannot be created (a process-substitution/FIFO store path such as `/dev/fd/N`, a read-only filesystem, a missing directory, or a create/write/fsync/link/fchmod failure), the daemon logs a warning and uses a transient per-run key, so unknown-user challenges change across restarts and the cross-restart guarantee does not hold for that deployment. One residual is accepted: the store iteration count is observable pre-auth by design, since the miss path must match a hit. **Transport policy (hardening A7-3/S1):** an auth-required module accepts credentials only when either (a) the connection is an encrypted, verified TLS connection whose client certificate matches `--client-cn`, or (b) the connection is plaintext from a loopback TCP peer **and** the operator explicitly passed `--allow-unauthenticated`. A remote plaintext peer, and a loopback plaintext peer without that flag, are refused at the config gate before any challenge is sent; `--allow-unauthenticated` never permits remote plaintext auth (remote peers still require verified TLS). Daemon modules are a `--daemon`-only feature — the SSH `--stdio` path never loads a daemon config and is not an auth transport for them. Because the loopback allowance trusts whichever peer the kernel reports as `127.0.0.1`, it assumes nothing relays remote connections to the daemon: a local TCP forwarder or TLS-terminating proxy in front of an auth-module listener makes remote clients appear as loopback and bypasses the mutual-TLS identity check, so do not front an auth-module listener with such a relay.
 - **Credential store format:** server `--password-file`/`--early-input` files are line-based `user:$fastsync$1$pbkdf2-sha256$<iters>$<salt_b64>$<stored_key_b64>$<server_key_b64>`, one per line (standard base64; 16-byte salt, 32-byte keys; `iters` in `[100000, 10000000]`, default 600000). Every entry in the resulting store must agree on `iters` (a store whose entries disagree, or where a layered `--early-input` disagrees with `--password-file`, is rejected). Generate lines with `fastsync-server --hash-credentials FILE [--iterations N]`; the emitted lines are secret material, so redirect them to an owner-only (mode 0600) file (the tool warns on stderr if stdout is a group/other-accessible regular file). Blank lines and lines starting with `#`/`;` are comments; the parser is strict (a malformed line fails the whole load, so a typo can never let a different set of users in). **The legacy `user:SHA256HEX` form is hard-rejected** with an actionable "legacy" error; there is no auto-upgrade, so a replayable bearer digest can never be loaded by a 2.19.0 daemon. The client `--password-file` holds `user:password` on its first meaningful line (the literal password, used only for the handshake then burned); keep both files readable only by their owner (mode 0600). Per-username wire length is bounded (256 chars) and every decoded salt/key length is validated. Loading the store also maintains an owner-only `<store_path>.dummykey` sidecar (auto-created, mode 0600, exactly 32 bytes) holding the store-wide dummy key that shapes unknown-user challenges; persist it across daemon restarts so those challenges stay stable, and treat a sidecar with the wrong owner, a mode other than exactly 0600, the wrong size or the wrong type as a fatal load error (fail closed). If the sidecar cannot be created (e.g. a process-substitution store path such as `/dev/fd/N`, a read-only filesystem, a missing directory, or a create/write/fsync/link/fchmod failure), the daemon logs a warning and uses a transient per-run key, so the cross-restart stability guarantee does not hold there.
 - **Plaintext caveat:** an auth-required module is refused, **before any challenge is sent**, unless the connection is encrypted and verified TLS whose client certificate matches the server's `--client-cn`, or it is plaintext from a loopback TCP peer **and** the operator passed `--allow-unauthenticated`. A remote plaintext peer, and a loopback plaintext peer without that flag, never receive a challenge, and `--allow-unauthenticated` never permits remote plaintext auth (remote peers still require verified TLS). On the loopback plaintext transport that remains permitted, a local sniffer could still read the challenge and response and mount an **offline dictionary attack** against a weak password, so use `--tls` for any real deployment. `--client-cn` matches the certificate CN only (not a subjectAltName), which is acceptable for a private CA. Clients sending daemon credentials with `--password-file` to a non-loopback daemon must use `--tls`; the client rejects such a destination before any network I/O. Unlike the old challenge-less exchange there is **no replay**: the proof is bound to the fresh per-connection server nonce, so a captured `STATUS_AUTH_RESPONSE` cannot be reused on another connection (an integration test proxies the daemon and proves this). TLS client-CN (`--client-cn`) is an independent transport identity check and composes with password auth; because `--tls` already mandates `--client-cn`, a TLS auth connection always verifies the client CN, so both checks necessarily apply together on such a connection.

shell.nix

@@ -3,11 +3,35 @@
 }:
 
 pkgs.mkShell {
+  # Development shell for FastSync.  Provides the host-side toolchain needed to
+  # build, lint, unit-test, integration-test and benchmark the project.
+  # It deliberately does NOT build on entry: run the CMake commands in README.md
+  # (or use the CI Docker image for exact CI parity).
   nativeBuildInputs = with pkgs; [
+    # build
     gcc
     cmake
     gnumake
     pkg-config
+    # lint / static analysis (matches CI)
+    clang-tools # clang-format
+    cppcheck
+    # tests
+    (python3.withPackages (ps: with ps; [ pytest pytest-xdist psutil ]))
+    openssh # SSH transport integration tests
+    # debugging
+    gdb
+    valgrind
+    # coverage
+    lcov
+    # benchmark tooling
+    rsync
+    iproute2 # tc/netem for network shaping
+    # misc
+    git
+    curl
+    nodejs
+    nixpkgs-fmt
     docker
     tea
   ];
@@ -15,14 +39,21 @@ pkgs.mkShell {
   buildInputs = with pkgs; [
     zstd
     openssl
-    (python3.withPackages (ps: with ps; [ pytest ]))
   ];
 
+  # The CMake configure step fetches xxHash via FetchContent, which needs
+  # network access; NIX_ENFORCE_PURITY must be off so the sandbox does not block.
   NIX_ENFORCE_PURITY = 0;
 
   shellHook = ''
     export NIX_ENFORCE_PURITY=0
-    cmake -B build
-    export PATH="$PWD/build:$PATH"
+    # Make an existing build tree available on PATH, but never build here.
+    if [ -d "$PWD/build" ]; then
+      export PATH="$PWD/build:$PATH"
+    fi
+    echo "FastSync dev shell ready."
+    echo "  Build:      cmake -B build -S . && cmake --build build -j\$(nproc)"
+    echo "  Unit:       ./build/tests"
+    echo "  CI parity:  docker run --rm --user \"\$(id -u):\$(id -g)\" -v \"\$PWD:/workspace\" -w /workspace gitea.tap-tap.win/taptap/fastsync-ci:v10 ..."
   '';
 }