Deletion timing is now real and selected by the four rsync flags plus the
plain --delete default. Wire protocol bumps to 2.8.0: two new config
booleans (delete_during, delete_delay) are serialized and validated, joining
the existing delete_before/delete_after.
- Early modes (--delete-before, --delete-during/--del): the sender pre-scans
the whole tree (paths only), transmits the keep-set manifest BEFORE any
file data, and the receiver removes extras and acks STATUS_OK; the sender
only streams data after the deletion committed. Deletion is thus performed
even if a later transfer phase fails (rsync delete-before/during are
destructive by definition). FastSync streams in a single scan so it cannot
interleave per-directory like rsync delete-during; --delete-during selects
the same engine mode as --delete-before (documented divergence).
- Late/commit modes (plain --delete, --delete-after, --delete-delay): the
manifest closes the data stream and deletion is committed only after
STATUS_FINISHED proves the whole transfer succeeded, preserving FastSync's
commit-style safety. --delete-delay converges with --delete-after because
FastSync never snapshots the destination during data flow (documented).
- The STATUS_MANIFEST frame is now self-delimiting and position-independent.
Single-threaded receivers delete before the success frame; the -m receiver
hands the keep-set to server.c, which commits the deletion only after the
disk writer thread has drained (fixes a delete-vs-in-flight-temp race).
- Every timing flag implies --delete; at most one timing flag is allowed.
- Each timing flag implies --delete, matching rsync; conflicts are rejected.
RSYNC_COMPAT Phase-2 row M: path-list construction and destination
directory creation while preserving traversal safety.
- -R/--relative with --files-from: transmit each listed entry under its
bare relative destination path (no source-root mirror). Files keep an
absolute local read path plus a separate wire/dest path (File.send_path);
manifest, incremental quick-check and change output follow the wire path,
so --delete and --remove-source-files stay consistent. -R without
--files-from is unchanged (full mirror).
- --no-implied-dirs: client-only, only meaningful with -R + --files-from.
A listed file whose parent dir is not itself (or via an ancestor)
explicitly listed cannot be placed; the run fails up front with a clear
error. No effect otherwise.
- --dirs/-d + --old-dirs/--old-d aliases: -d <dir> transmits the source
root as an explicit empty directory entry (STATUS_MKDIR frame); with
--files-from listed dirs are created empty and listed files transferred,
never descending. Works single-threaded, -m (sequential scanner in the
-m scan thread) and chunk-serialization (per-file type marker).
Directory entries appear in the delete manifest.
- --mkpath: new wire bool; server creates the destination root (and missing
leading components under its authorized root) at connection start. A
missing destination root is now rejected by default.
- Protocol bumped to 2.7.0 (mkpath wire field + STATUS_MKDIR + chunk type
marker). All receive paths funnel through file_save_to_disk_full which
creates directories via the secure confined mkdir engine; dir entries are
excluded from --remove-source-files outcome acknowledgements on both ends.
- Unit coverage: CLI parse (relative/dirs aliases/mkpath/no-implied-dirs),
config round-trip (relative + mkpath), scanner --dirs non-recursion and
-R send_path (sequential + parallel), receiver dir-entry save.
- Integration coverage: TestRelativeFilesFrom, TestNoImpliedDirs, TestDirs,
TestMkpath (single and -m).
- RSYNC_COMPAT: 4 rows move to Implemented (Summary 67/3/5/1/71 = 147).
Stage every successfully written file under a private 0700 .fastsync-stage
directory inside the receive root and atomically publish all staged files
only after the whole protocol stream (manifest/delete handling included)
has completed, immediately before the success/outcome frame. On any
abort/error before publication nothing is installed and staging is removed;
a publish failure aborts the transfer with best-effort cleanup of the
remainder (already-published files are not rolled back). Crash leftovers
are wiped when the next delayed transfer starts.
Wire: new delay_updates config flag (selection-options block), protocol
version bumped to 2.6.0, client/server validation rejects --inplace.
CLI/usage/validation updated. Works in single-threaded and -m modes
(exactly one write_thread stages files; the staged-file registry is
mutex-protected; publication runs once after both threads join).
--existing/--ignore-existing/--update decide against the final destination
at stage time; --backup is deferred to publication. remove_source_files
outcomes are only sent after publication so skipped/unpublished sources are
never deleted. Default (no flag) behavior is unchanged.
Tests: config wire round-trip, CLI parse, --inplace rejection, new
test_delay_updates unit suite (27 suites total), and integration
TestDelayUpdates covering single/-m parity, incremental reruns, remove
source files, receiver-skip ordering, and a deterministic publish-failure
abort path.
receive_files() in src/server/server.c was a non-static, unprototyped,
zero-caller duplicate of receiver_process()/receiver_receive_files() in
src/server/receiver.c. Delete it along with the includes it uniquely pulled
(chunk.h, metadata.h, sys/stat.h, duplicate quoted unistd.h); remaining code
still uses file.h/config.h/protocol.h (via multiprocessing.h) directly.
mkdir_r() in src/shared/utils.c had zero callers in src/ and tests/; remove
the function and its declaration in utils.h, plus the unused libgen.h include.
#251 --remove-source-files deletes sources that were skipped receiver-side
(--existing/--ignore-existing/--update). The receiver now reports a
per-file outcome for every processed data file when the sender requests
removal; the client only unlinks sources the receiver actually wrote.
add remove_source_files to the wire config and bump the protocol to 2.5.0.
#252 --backup/--suffix/--backup-dir broken by NULL-vs-empty wire loss. Receivers
canonicalize the empty wire string back to NULL for backup_dir, temp_dir,
partial_dir and suffix, and --suffix is received unconditionally.
#253 --partial --partial-dir never installed completed files. file_save_to_disk
now renames a fully written partial-dir file into the real destination.
#255 STATUS_CHECK read the entire old file before the size/mtime quick check.
Old contents are only read when a checksum compare or delta needs them.
#256 receive_delta_file failure paths did not set *failed, so the caller sent
STATUS_NEXT and waited for a body that never came. Every NULL return now
marks the transfer failed.
#257 files >64 MiB could not transfer. Whole-file receive caps raised to the
256 MiB connection/allocation ceiling (chunk caps stay 64 MiB) and the
client ignores SIGPIPE so a server-side close surfaces as a clean error.
Unit tests added: config NULL-vs-empty round trip, incremental quick-check
skip/NEXT paths, delta oversize failure, partial-dir install, save-result
skip reporting.
The per-connection memory budget (MAX_CONNECTION_MEMORY, 256 MiB) only
charged wire buffers via receive_data_limited. Decompression buffers and
per-file chunk copies were not accounted for, and the multithreaded
receiver could enqueue up to 100 files (each up to 64 MiB uncompressed)
ahead of a slow disk writer, retaining ~6.4 GiB per connection. A client
sending highly compressible chunks with little bandwidth could OOM the
host while the reserve never tripped.
Bound the receive pipeline by aggregate payload bytes instead of item
count alone:
- Export MAX_CONNECTION_MEMORY from protocol.h.
- PipelineContextReceiver tracks queued_bytes (payload bytes received but
not yet released by the disk writer, i.e. queued or in the writer's
hand) under the existing mutex.
- receiver enqueue now blocks while the queue is full by count OR when
adding the file would push queued_bytes over the configured byte limit,
applying backpressure to the sender instead of failing the transfer.
- The disk writer releases the byte budget after each file is freed and
signals the not-full condition.
- The server sets the byte ceiling to
MAX_CONNECTION_MEMORY - 2*MAX_CHUNK_SIZE so that the queued payloads
plus the transient wire/decompression buffers of the one in-flight
chunk stay within the per-connection budget.
The single-threaded receive path is already bounded: it writes files to
disk before reading the next chunk, so its transient is at most one
chunk's wire + decompressed + copied payload (~3 * MAX_CHUNK_SIZE, below
the budget). Wire buffers remain charged exactly once by
receive_data_limited; this change does not double charge them.
Adds a deterministic unit test in test_multiprocessing.c proving that an
enqueue which would exceed the byte budget blocks until the writer
releases bytes.
- file.c split layout retained; security-hardened secure-fs helpers
(open_secure_parent/to_disk_secure/rename_secure/stat_secure) now live in
file.c with file_ prefix and are shared with file_receive.c
- file_receive.c takes the security branch's bounded allocations
(receive_data_limited, data_decompress_limited, size checks) and
STATUS_ERROR signaling
- file_send.c gains the data consistency check on file->data
- client_validation.c: stricter --tls requiring --ca, log_message style
- utils.c: hardened openat/mkdirat mkdir_r from security branch
- Add log_perror() helper (context + strerror(errno)) to the log module
- Replace all bare perror() calls with log_perror() so errors are routed
through the unified logger (stderr sink + optional --log-file sink)
- Convert fprintf(stderr, "Error:/Warning: ...") in client code to
log_message(); raw fprintf kept only for progress/stats output
- Restore PROTOCOL_VERSION to a forward-compatible 2.1.0 and document wire format
- Add NULL guard to config_delete
- Add pipeline cancellation flag and cancellation-aware queue helper
- Join running threads before destroying pipeline contexts on creation failure
- Fix NULL dereference and memory leaks in manifest/chunk handling
- Fix TLS/TCP socket fd leak on connect error paths
- Add compression-level range validation (1-22)
- Close previous log file before opening a new one
- Use getline for unbounded pattern-file lines
- Fix thread-unsafe localtime() and add log level bounds check
- Fix file_load_data to clean up data on read size mismatch
- Add hard ceiling to decompression buffer growth
- Fix mkdir_r bounds check and restore glob comments
- Add send_str NULL guard and mutex-protect bandwidth limiter
- Update AGENTS.md for per-thread io_ssl contract
TapTap