rsync 3.4.1 resolves --partial-dir after option parsing and sets keep_partial,
so --partial-dir=DIR alone retains an interrupted transfer's partial file.
FastSync only used the partial dir when --partial was also given, silently
discarding it otherwise.
Set Config->partial in cli_finalize_config whenever partial_dir is set.
Following rsync, an explicit --no-partial does NOT win (verified on rsync
3.4.1 in either option order); --inplace is guarded because it writes the
destination in place with no partial staging.
Tests: CLI unit coverage for the implication/precedence/inplace guard, and a
deterministic integration case that blocks the final install (non-empty
directory at the destination) and asserts the staged partial survives under
--partial-dir alone.
--info=mount now prints rsync's mount-point skip line (matching rsync
3.4.1, which emits it for repeated -xx and drops the mount-point dir);
--info=stats enables the same block as --stats; -x is repeatable.
--stats counts traversed directories for the Number of files breakdown
even when no directory metadata is captured (-r without -t/-p).
--debug enables real output for flist/del/hash/deltasum/recv/filter/send
at their natural FastSync events (synthetic categories stay inert).
--stats and --debug rows keep their documented residual status.
- plain --delete with no timing flag now selects delete-during (progressive
deletion, matching rsync and avoiding the full old+new tree peak)
- new long-only FastSync --delete-commit restores the old atomic behavior
(delete only after the whole transfer succeeds); timing-identical to
--delete-after, implemented via the same wire bool
- timing flags are mutually exclusive; --delete-commit conflicts with other
timings; --delete-before/--delete-during rows reworded per Phase-0 probes
- CHANGELOG migration note; tally unchanged 116/14/27
- PROTOCOL_VERSION 2.27.0 -> 2.28.0; STATUS_STATS gains literal_bytes and
the created reg/dir/link/special counters (golden wire updated)
- receiver reports which destination entries it newly created, including
implicitly-created parent directories below the logical transfer root, so
Number of created files carries rsync's per-type breakdown
- Literal data is now exact for a delta transfer (receiver counts the literal
fragments it stored)
- differential-tested vs rsync 3.4.1 for fresh-create, update and delta
- -n/--delete sends the same protected/size-skipped/scope as a real run, so
the read-only would-delete walk no longer over-reports (row -> caveat)
- --delete-delay charges --max-delete on actual removals and recursively
re-scans a refilled deferred directory at commit; independent deferred cap
- --info=name emits the leading ./ root line and name2 'is uptodate' lines
- differential tests promoted from residual pins to rsync parity assertions
- --delete-delay: state that the reported count advances on actual removal
while --max-delete is charged at plan/snapshot time (defer_add/planned).
A new differential shows rsync instead charges on actual removals and
recursively removes a queued directory, so the row moves to Caveat
(matrix 111/13/33) and the residual is pinned by tests.
- Add a deterministic unit test (plan-time budget charge), a FastSync
integration test (byte-barrier refill + --max-delete), and an rsync
differential for a refilled deferred directory.
- Soften the --fuzzy summary: the tree is byte-exact by design, so it is
pinned by the threshold suite, not a byte-level differential.
- README: describe what -m parity actually selects; fix the allowlist
example to the real max_delete entry.
- xdist-safe delete-timing fixture names (timing and --threads mode).
- Renumber the duplicate HANDOFF item 9 to 10; add the missing final
newline to test_checksum.c.
- Expose ignore_errors_allows_delete and unit-test the deletion gate
without a privileged source directory; update the stale deleted-count
doc comment.
No production behavior changes.
- cli: remove UB in --bwlimit scaling (range-check the double product before
casting, drop atoi for the +/-1 form) and add huge/boundary unit tests
- test: widen the CI throttle wall-clock band to [1.5, 4.5]s with a 2s
cross-tolerance so a loaded runner cannot flake it
- log: drop the unused LOG_INFO_BACKUP bit; --info=backup is accepted-but-
silent like the other rsync-only categories
- client_send: remove the duplicate delete_display_path forward declaration
- utils: add non-allocating utils_strip_transfer_root and use it from
scanner_note_nonreg and delete_display_path (was duplicated logic)
- scanner: lstat() instead of stat() when re-reading an empty dir's metadata
- file: drop the no-op else-if and the redundant ELOOP arm in
file_ensure_directory_secure (symlinks are refused anyway)
- format/stats: document literal_data as whole-file accurate (delta upper
bound) instead of claiming literal bytes sent
- docs: refresh stale protocol 2.26.0 labels to 2.27.0
- Wire: config frame gains report_deletes (protocol 2.26.0 -> 2.27.0); the
receiver lists actually-removed paths in the STATUS_STATS path list, so the
sender prints rsync's `deleting PATH` / `*deleting PATH` lines for a real
--delete run (and -i/out-format). Observers threaded through the manifest,
missing-args and per-directory delete engines; golden wire len/hash updated.
- bwlimit: throttle now paces like rsync 3.4.1 -- ~100ms burst capacity and the
sleep is no longer credited as refill, so 4 MiB at 1024/2048 KiB/s matches
rsync within ~4% (was ~2x too fast).
- --bwlimit: faithful port of rsync 3.4.1 parse_size_arg (default KiB/s,
binary K/M/G/T/P, decimal KB/MB, KiB/MiB, decimals, 0 = unlimited, 512-byte
floor, (size+512)/1024 quantization). Unit tests + docs.
- --info: wire del/remove/name/flist/nonreg/progress to real FastSync events in
rsync's line format (deleting PATH, sender removed NAME, name lines,
'sending incremental file list', skipping non-regular file "NAME"); name no
longer aliases copy; --info=progress drives the progress path and report_stats.
- --ignore-errors: match rsync's default -- a source I/O error skips deletion
unless --ignore-errors, while the readable tree still transfers and the run
exits 23. Covers all delete timings and both send paths.
Accept the full rsync 3.4.1 --info (backup, del, flist, mount, nonreg,
progress, remove, symsafe) and --debug (acl, backup, bind, chdir, connect,
cmd, del, deltasum, dup, exit, filter, flist, fuzzy, genr, hash, hlink,
iconv, nstr, own, recv, send, time) vocabularies, plus the historical
syms/hl/owner aliases, with level suffixes. Categories FastSync already
emits (copy/name/misc/skip/stats and io/proto/pack/util) still set their
log flags; the rest are accepted but silent. Unknown names remain
rejected by name, matching rsync. Update the CLI unit tests and the
rsync-parity integration tests (previously they required del/filter to be
rejected).
Add tests/integration/test_codecs.py (accept/reject matrix and byte
differential against rsync 3.4.1 for every algorithm), extend the
checksum/compression unit tests with MD4/SHA1/none vectors and per-codec
round-trips, pin the new config golden (2.26.0), and update the version
strings and codec acceptance expectations.
Stream one delete plan per source directory from sender to receiver instead of
a single whole-tree keep-set manifest:
- --delete-during applies each directory's extras as its plan arrives, before
that directory's data (rsync's generator-order deletion).
- --delete-delay snapshots each directory's extras while the plan arrives and
commits the removals only after a fully-successful transfer, so files created
after the scan survive (matching rsync's delete-delay, not delete-after).
- Type conflicts (a destination file blocking a source directory, or vice
versa) are cleared immediately in both modes, so the nested write succeeds.
The plan carries the destination-relative directory, its kept child directory
names and its kept child file names; the first frame also carries the global
protected prefixes, size-skipped prefixes and --delete-missing-args paths.
--delete-before keeps the existing whole-tree early manifest; plain --delete and
--delete-after keep the end-of-transfer manifest commit.
Preserves the existing safety surface: protected/size-skipped prefixes and the
--delay-updates/basis skips are honored at any depth, deletion is scoped to the
synchronized directories (--files-from), MAX_SERVER_DELETE_COUNT and
--max-delete (partial + exit 25) are shared across plans, symlinks are never
followed, and paths are confined to the receive root.
Bump PROTOCOL_VERSION to 2.25.0 and append a report_stats bool to the
config frame, add a STATUS_STATS status, and add process-wide wire byte
counters (protocol_bytes_written/read) for the client.
Render the rsync 3.4.1 --out-format %b (wire bytes sent) and %c (wire
bytes read back) tokens from per-file counter deltas, and %C (whole-file
xxh128 checksum, seed 0) via a new streaming checksum_digest_file().
- --chmod no longer implies --preserve-perms; repeated --chmod options
accumulate, and D/F/X selectors plus s/t special bits are supported with
rsync's exact parse_chmod/tweak_mode semantics.
- Stop masking group/other write and setuid/setgid/sticky: -p copies the
source mode exactly, no-p new entries use source&~umask, directories keep
setgid/sticky, and special nodes follow the same rules.
- Apply ownership before mode on the fd path so a chown cannot clear the
setuid/setgid bits -p just restored (rsync order).
- Update unit and integration tests, including differential checks against
rsync 3.4.1.
Address review findings on feat/rsync-parity:
- confine --temp-dir below the receive root (reject absolute/.. like
backup-dir/partial-dir); keep EXDEV non-atomic fallback
- floor server session I/O deadlines at SERVER_IO_TIMEOUT_SEC (60s) and
install it on the socket layer at startup (slow-loris)
- charge each --delete-missing-args directory removal once and clamp the
extras-walk remaining budget so it can never underflow past --max-delete
- normalize --compress-choice=auto to zstd client-side and accept it on
receive so auto transfers no longer fail
- map received --max-alloc=0 to MAX_SERVER_ALLOC (receive path only)
- zero File.dest_state; include log-file-format in report_dest_info;
add STATUS_DELETE_LIMIT name; recognize --skip-compress as a
separate-value option; OOM-guard send_list_only root entry; drop the
dead -M= branch; record the bare relative protected prefix for -R
size-prunes in both scanners; refresh delete-manifest comment
- pin the rsync tarball sha256 and bump integrator image to v11
Tests: temp-dir rejection/relative/cross-device, server timeout floor,
delete-missing dir budget regression, compress-choice=auto e2e,
max-alloc=0 receive mapping, dest_state, report_dest_info modes,
skip-compress dash value, -M short forms, -R root size-prune mirror
protection (rsync 3.4.1 confirmed).
- Scope the --delete extras walk to directories synchronized by the
transfer: add a synchronized-directory section to the delete manifest
(protocol 2.23.0) so --files-from subsets no longer delete untransmitted
paths outside listed directory subtrees (data-loss fix).
- Separate --max-size/--min-size prune protection from --delete-excluded so
size-pruned source mirrors survive (rsync parity).
- Unlink extraneous destination symlinks instead of skipping them.
- Make --max-delete partial (delete up to N, skip the rest) and exit 25;
accept negative values as unlimited.
- Draw --delete-missing-args deletions from the shared --max-delete budget.
- Honor --force during --delay-updates publication.
Add unit and integration regression tests; update the pinned config wire
golden and version strings for the 2.23.0 manifest/status additions.
#289 checksum/compression:
- -c/--checksum now implies the incremental content quick-check (without
implying -t), so an unchanged file is skipped like rsync.
- --checksum-choice/--cc accepts xxh64/xxhash, xxh3, xxh128, md5 and auto;
md4/sha1/none and the two-name form are rejected by name.
- --compress-choice/--zc rejects lz4/zlib/zlibx by name (zstd/none/auto kept).
- --checksum-seed=0 is randomized per transfer and sent on the wire.
- --skip-compress uses rsync 3.4.1's default suffix list; slash separators and
dot-less suffixes are accepted.
- add --no-whole-file.
#295 timeouts/alloc/temp-dir:
- --timeout default 0 (disabled), --contimeout default 60; 0 disables both,
plus --no-timeout/--no-contimeout.
- --max-alloc=0 means no allocation limit (was rejected).
- --temp-dir accepts any dir, requires it to exist, and falls back to a
non-atomic copy on EXDEV instead of aborting.
#296 connectivity/daemon:
- -M/--remote-option is rejected for daemon/TCP destinations (SSH-only).
- --trust-sender clarified as receiver-local; server-path tests added.
- --stop-at accepts rsync's full date form (y-m-dTh:m etc.).
Adds unit and integration coverage; no wire-field change, PROTOCOL_VERSION stays
2.22.0.
- #286: --numeric-ids is a mapping modifier only; it no longer activates
chown by itself (identity_active_enabled/owner/group predicates), and
--fake-super stores the resolved mapping instead of real-chowning.
- #286: apply owner/group to directories via the deferred directory
metadata path; capture+transmit+apply directory xattrs/ACLs (-aX/-aA),
including default ACLs, in STATUS_MKDIR/STATUS_DIR_TIMES.
- #294: --usermap/--groupmap support inclusive ranges, '*', empty FROM
(unnamed ids), and receiver-side TO name resolution; --chown mixing with
a same-side map is rejected like rsync.
- Protocol 2.22.0 -> 2.23.0 (map wire entry gains from_hi + to_name;
dir frames gain a bounded xattr block).
#291:
- Compile --exclude/--include/--exclude-from/--include-from into the SAME
ordered rule list as --filter/-f (first match wins), so the common
`--include='*.txt' --exclude='*'` idiom and include-alone semantics match
rsync. The legacy per-kind scanner arrays are no longer applied.
- -x/--one-file-system emits the cross-device mount-point directory entry
(empty) instead of dropping it, in both the sequential and parallel scanners.
- Stop passing the legacy arrays to the scanner; document -f is --filter.
#292:
- New src/shared/format.c/.h: rsync "big_num" (comma-grouped integers) and
decimal -h human sizes, %M/%t timestamp, and the STATUS_DEST_INFO codec.
- Receiver answers each STATUS_CHECK with a pre-transfer destination snapshot
(new report_dest_info wire field + STATUS_DEST_INFO, PROTOCOL_VERSION
2.23.0) so the sender can render true itemize columns.
- Itemize now emits rsync-correct update/type chars and c/s/t/p/o/g columns
for files, dirs, symlinks and hard links, comparing size/time/perms/owner/
group against the reported destination.
- --out-format gains %i %n %f %l %b %M %t %o %p %B %U %G %L; %f is the
relative display path, %M the YYYY/MM/DD-HH:MM:SS form, %b the literal
bytes sent.
- --list-only prints transfer-relative names, directory entries and ls-style
grouped sizes.
- --stats prints rsync's multi-line block on stdout; -h uses decimal units.
Tests: unit tests for the filter ordering, format primitives, itemize
columns; integration + differential tests against real rsync 3.4.1 for
itemize/out-format/list-only/selection and -x. Golden wire len/hash and
protocol version strings updated for 2.23.0.
Implement rsync 3.4.1 client-CLI parity:
- cluster boolean shorts (-av, -aAX, -rlpt) and accept attached values
(-B1048576, -essh, -Mfoo); add the -r, -b, -L and -B short aliases
(-r is a faithful no-op since FastSync is always recursive)
- stop OPT_NOOP (-s/--secluded-args, -r/--recursive) from swallowing the
next argv
- add inline --opt=value for every value-taking long option, including
--exclude/--include/--exclude-from/--include-from/--log-file (#291)
- accept --port on the server CLI in addition to -p (#296)
- reject unknown flags naming the flag and stating it is unsupported
Unit tests cover clustering, attached/inline values, the OPT_NOOP
argument-consumption fix and rejected shorts.
Split FastSync's single use_metadata bundle into four independent rsync-parity attributes: preserve_perms, preserve_times, preserve_owner, preserve_group. use_metadata is now a derived transport bit (config_derived_use_metadata).
CLI: real -p/--perms, -t/--times, -o/--owner, -g/--group plus --no-perms/--no-times/--no-owner/--no-group (short and long) and --no-preserve; -a is now rsync -rlptgoD; --preserve = -pt; -A implies -p; -X does not; --chmod implies -p; --usermap/--groupmap/--chown imply owner/group per side; --incremental/--delta still auto-preserve unless negated.
Receiver: per-attribute FileAttrPolicy gating for files, dirs (modes applied at end of transfer), symlinks and specials; rsync -E read-bit rule; new files get source_mode & ~umask sanitized (no group/other write); per-side identity resolution; deferred directory metadata; batch dir-metadata replay; daemon modules without 'client owner = yes' no longer refuse plain -a but force super off (no ownership) with a warning.
Wire: PROTOCOL_VERSION 2.21.0 -> 2.22.0 (four appended config bools, golden 653 / 95530566005420798). FileMetadata/chunk/batch framing unchanged. Docs/CHANGELOG/CMake updated to 2.22.0.
Bring README.md and RSYNC_COMPAT.md in line with the actual code/CLI and add
an automated guard so they cannot silently drift again.
Waves A-E:
- Correct stale compatibility claims: archive is `-rlptD` (owner/group are
opt-in via identity flags, not implied), and symlinks, hard links, xattrs,
ACLs and `--dirs` are implemented.
- Remove documented-but-nonexistent features: the six unread FASTSYNC_* env
vars, and `--client-cn` (server-only) from the client table.
- Repair the corrupted "Implementation Details" section (broken list numbering
and emphasis) and correct it against the source.
- Sync the client and server option tables with usage.c / server_cli.c, and
document server-contacting `--dry-run` (protocol 2.21.0).
- Hygiene: `# FastSync` heading, real build commands, consistent binary names,
runnable TLS examples, daemon module keys.
Also align the client `--help` / archive log wording and the RSYNC_COMPAT
archive rows with the opt-in ownership model, and add
tests/integration/test_readme_consistency.py (marked `ci`) asserting every
documented FASTSYNC_* var is read in src/ and every documented client/server
flag appears in the corresponding `--help`.
- parse_ull_arg() rejects a leading '-'/'+' (strtoull would silently wrap
-1 to ULLONG_MAX) and --chunk-size/--delta-max enforce their upper bounds.
- Escape local untrusted paths before logging (client_send, scanner,
--filter rule, pattern-file reads) with output_escape(..., 8-bit mode).
- Read --exclude-from/--include-from through the bounded line reader.
- Open --log-file with O_NOFOLLOW|O_CLOEXEC, mode 0600, via open+fdopen;
create --write-batch with O_NOFOLLOW|O_CLOEXEC, mode 0600.
- Reject --dry-run together with --write-batch (dry-run must not write the
batch file), alongside the existing --read-batch/--only-write-batch rules.
Tests: signed/oversized numeric rejection, over-long pattern file, dry-run +
write-batch unit and integration coverage.
Extend _snapshot_tree to record mode, inode, xattrs, directories and
special nodes, and add coverage proving a server-contacting --dry-run
leaves the destination structurally identical for --delay-updates,
--backup, symlinks, hardlinks, FIFOs, and daemon modules (including a
read-only module). Add a regression test for the --read-batch --dry-run
refusal and for a missing/non-directory receive root failing a dry-run
exactly like a real run.
Fix stale version comments (2.20.0/633 -> 2.21.0/637) and RSYNC_COMPAT's
current --protocol value, and add a unit assertion that
--server-port/--port (and --server-host) set the dry-run routing bit.
--dry-run now handshakes with a remote/daemon receiver and reports what
WOULD transfer/skip based on receiver state, mutating nothing on either
side.
- Serialize Config.dry_run into the wire config frame and append
STATUS_DRY_RUN_TRANSFER to the status enum (no renumbering); bump
PROTOCOL_VERSION/CMake VERSION/CHANGELOG/golden wire to 2.21.0.
- Receiver: receive_incremental_check_ex runs the normal read-only
decision and answers STATUS_OK (skip) or STATUS_DRY_RUN_TRANSFER
(would transfer) with no basis materialization/append/delta/full
transfer. All mutation sites are guarded by !dry_run: file store,
manifest deletes, --mkpath root creation, --delay-updates staging,
publication, directory-time application, and outcome acks.
- Client: send_dry_run_remote connects, sends the config, checks each
regular file and prints the would-transfer set + trailer; no file data
or delete manifest is sent. Plain local destinations keep the
client-side manifest.
Daemon modules that declare 'auth users' no longer accept credentials over a
remote plaintext connection: server_module_gate refuses at the config gate,
before any SCRAM challenge is sent, unless the connection is verified TLS with
a client certificate matching --client-cn, or a local/SSH transport (loopback
TCP peer or the --stdio pipe). --allow-unauthenticated does not relax this.
The TLS client-CN comparison now uses credentials_secure_equal (S2). Clients
sending --password-file to a non-loopback daemon must use --tls; validate_config
rejects the plaintext case before any network I/O.
Adds utils_sockaddr_is_loopback / utils_fd_peer_is_local / utils_host_is_loopback
helpers with unit tests, a client validation unit test, and integration tests
for the client-side plaintext rejection and the wrong-CN gate refusal.
- server_cli: handle --password-file/--early-input/--iconv via arg_has_value
in one place, removing the unreachable duplicate separate-form arms while
keeping both --opt VALUE and --opt=VALUE working
- client_cli: factor the triplicated --delta-block/--block-size range check
into set_delta_block_size(); drop the redundant use_metadata assignment
after identity_parse_copy_as (the parser already forces it)
- tests: cover both spellings of --iconv/--delta-block, make the archive
short-form test actually call parse_args, add delta-block invalid cases
TapTap
opencode