Capture+transmit source atime (pre-read stat; O_NOATIME sender guard) and birth
time (statx STATX_BTIME); receiver restores atime with mtime (crtime not settable
portably -> transmitted, explicitly not applied). --open-noatime is client-only.
-O/-J documented as accepted no-ops (FastSync never preserves dir/symlink times).
Wire: metadata frame gains atime/crtime val+sec+nsec; PROTOCOL_VERSION
2.11.0->2.12.0. Review fixes: gate atime capture to Linux (no epoch clobber on
non-Linux), close fd on fdopen failure, honest -O/-J status (Compat no-op).
Source files sharing (st_dev,st_ino) are recreated as hard links on the
destination; only the first member's data crosses the wire (siblings ride a
payload-less STATUS_HARDLINK frame). Ordering requires the single-FIFO-writer
receiver + forced sequential scan (documented). link()-failure falls back to a
byte-identical local copy. Rejects -s/--append. PROTOCOL_VERSION 2.11.0->2.12.0.
Review fixes: delete the dead HardLinkRegistry (ordering holds by FIFO writer),
and --existing no longer aborts when the first member is absent but the sibling
exists (leaves the sibling in place).
Receiver allocates the destination file's full size before streaming data
(posix_fallocate preferred, ftruncate fallback on EOPNOTSUPP/ENOSYS) so an
out-of-space transfer fails fast instead of partway. Additive config bool
crossing the wire; PROTOCOL_VERSION 2.10.0 -> 2.11.0. Threaded through all
store paths (atomic, inplace, partial/delay-updates staging, link-dest copy
fallback). Review hardening: explicit lseek(0) before the data write so
correctness does not depend on posix_fallocate leaving the fd offset unchanged.
Receiver-side ownership application, opt-in and privilege-gated:
- OFF for every existing transfer (plain -M/--preserve still never applies
ownership); only triggers on an explicit identity flag + receiver permission.
- EPERM/EACCES warn-and-continue (never aborts); other fchown errors escalate.
- fd-relative fchown after the file is written (symlink-safe, confined).
- New src/shared/identity.{c,h}; config fields numeric_ids / chown uid/gid /
usermap + groupmap id-pair tables cross the wire; PROTOCOL_VERSION 2.10.0
-> 2.11.0. CLI in client_cli.c; per-connection snapshot in server.c.
- Review fixes: EPERM/EACCES-only warn-and-continue, prominent root-receiver
notice, identity_clear_active on early server error paths, --numeric-ids
kept inert standalone (removed from activation trigger set).
Adds real algorithm selection (xxh64 default, plus md5 via OpenSSL EVP) and a
64-bit seed for the per-file whole-file digest used by the --incremental/
--checksum handshake and basis-dir content verification. The seed also feeds
the delta path's per-block xxHash32 strong checksum (low 32 bits) so an
explicit seed deterministically changes those digests too. Sender and receiver
hash identically: the algorithm id and seed cross the config wire frame and the
STATUS_CHECK handshake now carries a length-prefixed, bounded digest instead of
a fixed 64-bit value. Unsupported algorithm names are rejected at parse time
(never a silent no-op). PROTOCOL_VERSION bumped 2.9.0 -> 2.10.0; defaults
(xxh64, seed 0) preserve prior byte-for-byte behavior.
Implement rsync's append modes: when an existing destination file is SHORTER
than the source, the receiver negotiates a resume offset and only the tail is
transferred; the full file (retained prefix + tail) is rebuilt and installed
through the normal atomic store path, so the result is byte-identical to the
source whenever the prefix matches.
- --append: sends the tail without content-verifying the retained prefix
(rsync parity; the documented prefix-trust risk).
- --append-verify: verifies the retained prefix against the source's prefix
xxHash64 before appending and, on a mismatch, falls back to a clean full
transfer (never a corrupt prefix+tail blend).
New wire frames STATUS_APPEND / STATUS_APPEND_SIG / STATUS_APPEND_OK /
STATUS_APPEND_DATA; PROTOCOL_VERSION bumped 2.9.0 -> 2.10.0 (peers must match).
Both flags imply --incremental and are incompatible with -s (chunk
serialization) and --whole-file (rejected up front). Respects --inplace,
--partial/--partial-dir and --delay-updates via the shared store engine.
PROTOCOL_VERSION 2.9.0 -> 2.10.0. The STATUS_MANIFEST frame gains a third
section carrying destination-relative exact-delete paths (the missing
--files-from entries' mirrors); the config frame gains a delete_missing_args
bool (ignore_missing_args stays client-only). The receiver validates the third
section like the keep-set and commits it with manifest_delete_all():
manifest_delete_missing_args runs first (explicit user requests, never blocked
by protected-prefix exclusion protection; staging/basis protected; a non-empty
directory mirror removed only under --force/--delete, rsync parity) and then the
ordinary extras walk. Server --allow-delete gates it like --delete.
Adds ignore_errors (client-only) and force_delete (wire) booleans, makes
max_delete default -1 (no client limit), and parses --delete-excluded,
--max-delete=NUM, --ignore-errors, --force, --prune-empty-dirs. Bumps
PROTOCOL_VERSION 2.8.0 -> 2.9.0 for the new on-the-wire force_delete field.
-y/--fuzzy is receiver-side similar-file basis selection, so the receiver
must learn the flag: add a bool to Config, serialize it as a trailing field
on the config frame, and validate the received value. Because the config
frame layout changed, PROTOCOL_VERSION moves to 2.9.0 (peers must match).
config_basis_path_valid and config_basis_append now share one normalizer
(basis_path_normalize): interior empty components (a//b) collapse, '.'
components and trailing slashes are dropped, and the stored form is exactly
the canonical relative path used by validation, the delete-walker prefix match
and the receiver's basis lookup. Degenerate inputs (empty, absolute, '..',
'.' that normalizes to nothing) stay rejected.
Deletion timing is now real and selected by the four rsync flags plus the
plain --delete default. Wire protocol bumps to 2.8.0: two new config
booleans (delete_during, delete_delay) are serialized and validated, joining
the existing delete_before/delete_after.
- Early modes (--delete-before, --delete-during/--del): the sender pre-scans
the whole tree (paths only), transmits the keep-set manifest BEFORE any
file data, and the receiver removes extras and acks STATUS_OK; the sender
only streams data after the deletion committed. Deletion is thus performed
even if a later transfer phase fails (rsync delete-before/during are
destructive by definition). FastSync streams in a single scan so it cannot
interleave per-directory like rsync delete-during; --delete-during selects
the same engine mode as --delete-before (documented divergence).
- Late/commit modes (plain --delete, --delete-after, --delete-delay): the
manifest closes the data stream and deletion is committed only after
STATUS_FINISHED proves the whole transfer succeeded, preserving FastSync's
commit-style safety. --delete-delay converges with --delete-after because
FastSync never snapshots the destination during data flow (documented).
- The STATUS_MANIFEST frame is now self-delimiting and position-independent.
Single-threaded receivers delete before the success frame; the -m receiver
hands the keep-set to server.c, which commits the deletion only after the
disk writer thread has drained (fixes a delete-vs-in-flight-temp race).
- Every timing flag implies --delete; at most one timing flag is allowed.
- Each timing flag implies --delete, matching rsync; conflicts are rejected.
Replace the vestigial single compare_dest/copy_dest/link_dest Config fields with
an ordered BasisDest list (type + path per entry) that is serialized to the
receiver and interpreted relative to the destination root. Paths must be
relative with no '.'/'..' components (confined like --backup-dir); trailing
slashes are normalized. Wire layout changes, so PROTOCOL_VERSION -> 2.8.0.
CLI: each flag is parsed in both --flag=DIR and --flag DIR forms, is
repeatable, and keeps command-line order as basis priority. Supplying any
basis dir implies --incremental (and therefore metadata) on the sender because
the unchanged decision is receiver-side; combining basis dirs with -s chunk
serialization is rejected in validate_config. Usage text updated.
RSYNC_COMPAT Phase-2 row M: path-list construction and destination
directory creation while preserving traversal safety.
- -R/--relative with --files-from: transmit each listed entry under its
bare relative destination path (no source-root mirror). Files keep an
absolute local read path plus a separate wire/dest path (File.send_path);
manifest, incremental quick-check and change output follow the wire path,
so --delete and --remove-source-files stay consistent. -R without
--files-from is unchanged (full mirror).
- --no-implied-dirs: client-only, only meaningful with -R + --files-from.
A listed file whose parent dir is not itself (or via an ancestor)
explicitly listed cannot be placed; the run fails up front with a clear
error. No effect otherwise.
- --dirs/-d + --old-dirs/--old-d aliases: -d <dir> transmits the source
root as an explicit empty directory entry (STATUS_MKDIR frame); with
--files-from listed dirs are created empty and listed files transferred,
never descending. Works single-threaded, -m (sequential scanner in the
-m scan thread) and chunk-serialization (per-file type marker).
Directory entries appear in the delete manifest.
- --mkpath: new wire bool; server creates the destination root (and missing
leading components under its authorized root) at connection start. A
missing destination root is now rejected by default.
- Protocol bumped to 2.7.0 (mkpath wire field + STATUS_MKDIR + chunk type
marker). All receive paths funnel through file_save_to_disk_full which
creates directories via the secure confined mkdir engine; dir entries are
excluded from --remove-source-files outcome acknowledgements on both ends.
- Unit coverage: CLI parse (relative/dirs aliases/mkpath/no-implied-dirs),
config round-trip (relative + mkpath), scanner --dirs non-recursion and
-R send_path (sequential + parallel), receiver dir-entry save.
- Integration coverage: TestRelativeFilesFrom, TestNoImpliedDirs, TestDirs,
TestMkpath (single and -m).
- RSYNC_COMPAT: 4 rows move to Implemented (Summary 67/3/5/1/71 = 147).
Review fixes for --delay-updates:
- --delete no longer deletes the staged files: the delete walker gains a
skip_root_child parameter and receive_manifest passes DELAY_UPDATES_STAGING_DIR
when delay_updates is active, so deletion removes genuine extras while the
staging dir (a direct child of the receive root) is left for publication in
both single and -m modes.
- --backup-dir is rejected when it collides with the reserved internal staging
name .fastsync-stage (trailing slash normalized), in client validation and in
the received-config wire validation, preventing old backups from being
silently installed as new files.
- Staging dir is now held under an exclusive advisory flock for the whole
transfer (context lifetime): two simultaneous delayed transfers to one
destination root no longer share/destroy each other's staged data - the
second fails cleanly. Cleanup only touches the staging dir when this context
owns the lock, so a lock-contention failure cannot wipe a live session.
- Post-publish staging cleanup now returns/logs instead of discarding failures
(warning when the staging dir cannot be fully removed).
- Reworked the publish-failure integration test to exercise real mid-publish
semantics (top-level file published, nested rename fails, no rollback,
sources retained under --remove-source-files) and added integration tests for
--delete + --delay-updates ordering and reserved --backup-dir rejection.
- RSYNC_COMPAT note documents delete ordering, the reserved-name hazard, and
the concurrency guard.
Implement the RSYNC_COMPAT Phase-2 filter/parser feature group:
- --files-from=FILE (repeatable) plus -0/--from0 NUL delimiters: parse the
source file list relative to the source root into a shared read-only
allow-set; the scanner transfers listed files and the whole subtree of
listed directories and prunes everything else in single- and
multithreaded mode. Absolute/'..' entries and missing files are hard
CLI errors.
- --filter=RULE: rsync-style +/- rules (anchored '/', dir-only trailing '/',
word include/exclude forms) evaluated first-match-wins with a default of
include, as an independent layer from legacy --exclude/--include.
Unsupported directives (merge/hide/... ) are rejected explicitly. -f stays
sendfile.
- -C/--cvs-exclude: well-known rsync CVS default exclude set.
- -F: per-directory .rsync-filter files read during traversal and applied to
the owning directory's subtree (single + parallel), never transferred.
- Delete manifest still derives from what was actually sent.
Client-only config fields; no wire/protocol change. Adds unit coverage
(CLI parse, allow-set and filter scanning single+parallel) and integration
tests (TestFilesFrom, TestFilters). RSYNC_COMPAT matrix rows updated:
5 rows move to Implemented (Summary 62/3/5/1/76 = 147).
Stage every successfully written file under a private 0700 .fastsync-stage
directory inside the receive root and atomically publish all staged files
only after the whole protocol stream (manifest/delete handling included)
has completed, immediately before the success/outcome frame. On any
abort/error before publication nothing is installed and staging is removed;
a publish failure aborts the transfer with best-effort cleanup of the
remainder (already-published files are not rolled back). Crash leftovers
are wiped when the next delayed transfer starts.
Wire: new delay_updates config flag (selection-options block), protocol
version bumped to 2.6.0, client/server validation rejects --inplace.
CLI/usage/validation updated. Works in single-threaded and -m modes
(exactly one write_thread stages files; the staged-file registry is
mutex-protected; publication runs once after both threads join).
--existing/--ignore-existing/--update decide against the final destination
at stage time; --backup is deferred to publication. remove_source_files
outcomes are only sent after publication so skipped/unpublished sources are
never deleted. Default (no flag) behavior is unchanged.
Tests: config wire round-trip, CLI parse, --inplace rejection, new
test_delay_updates unit suite (27 suites total), and integration
TestDelayUpdates covering single/-m parity, incremental reruns, remove
source files, receiver-skip ordering, and a deterministic publish-failure
abort path.
Implement rsync-style itemized output backed by one shared change-event
engine (src/client/change_list.c):
- -i/--itemize-changes prints ">f+++++++++ <path>" for files actually sent
(single-threaded and -m); unchanged files print nothing.
- --list-only prints an ls-style listing of files that would be transferred
without contacting the server or writing anything.
- --out-format=FORMAT prints a printf-style template per changed file
(tokens %%f %%n %%l %%b %%M %%%%; unknown escapes preserved).
- --log-file-format=FMT logs each transferred file when --log-file is set.
Events are emitted from the per-file sender path shared by both transfer
modes, so the single sender thread is the only reporter (no races).
Capture the transfer root's device (st_dev) at scanner creation and skip
descending into any subdirectory on a different device (a mount point).
Implemented sender/client-side only: sequential BFS and parallel (-m) root
scan apply the same scanner_same_filesystem decision; no wire/protocol change
and default behavior is unchanged. Unit tests cover the pure decision, same
device scanning in both modes, and CLI parsing; integration tests prove -x
leaves a single-filesystem tree byte-identical and, when root can mount a
tmpfs, skips a genuine cross-device subtree.
#251 --remove-source-files deletes sources that were skipped receiver-side
(--existing/--ignore-existing/--update). The receiver now reports a
per-file outcome for every processed data file when the sender requests
removal; the client only unlinks sources the receiver actually wrote.
add remove_source_files to the wire config and bump the protocol to 2.5.0.
#252 --backup/--suffix/--backup-dir broken by NULL-vs-empty wire loss. Receivers
canonicalize the empty wire string back to NULL for backup_dir, temp_dir,
partial_dir and suffix, and --suffix is received unconditionally.
#253 --partial --partial-dir never installed completed files. file_save_to_disk
now renames a fully written partial-dir file into the real destination.
#255 STATUS_CHECK read the entire old file before the size/mtime quick check.
Old contents are only read when a checksum compare or delta needs them.
#256 receive_delta_file failure paths did not set *failed, so the caller sent
STATUS_NEXT and waited for a body that never came. Every NULL return now
marks the transfer failed.
#257 files >64 MiB could not transfer. Whole-file receive caps raised to the
256 MiB connection/allocation ceiling (chunk caps stay 64 MiB) and the
client ignores SIGPIPE so a server-side close surfaces as a clean error.
Unit tests added: config NULL-vs-empty round trip, incremental quick-check
skip/NEXT paths, delta oversize failure, partial-dir install, save-result
skip reporting.
The Phase 1 merge conflict resolutions introduced formatting that failed
the CI lint job (clang-format 18.1.3). Reformatted with the exact CI
version; no functional changes.
TapTap