- --chmod no longer implies --preserve-perms; repeated --chmod options
accumulate, and D/F/X selectors plus s/t special bits are supported with
rsync's exact parse_chmod/tweak_mode semantics.
- Stop masking group/other write and setuid/setgid/sticky: -p copies the
source mode exactly, no-p new entries use source&~umask, directories keep
setgid/sticky, and special nodes follow the same rules.
- Apply ownership before mode on the fd path so a chown cannot clear the
setuid/setgid bits -p just restored (rsync order).
- Update unit and integration tests, including differential checks against
rsync 3.4.1.
Address review findings on feat/rsync-parity:
- confine --temp-dir below the receive root (reject absolute/.. like
backup-dir/partial-dir); keep EXDEV non-atomic fallback
- floor server session I/O deadlines at SERVER_IO_TIMEOUT_SEC (60s) and
install it on the socket layer at startup (slow-loris)
- charge each --delete-missing-args directory removal once and clamp the
extras-walk remaining budget so it can never underflow past --max-delete
- normalize --compress-choice=auto to zstd client-side and accept it on
receive so auto transfers no longer fail
- map received --max-alloc=0 to MAX_SERVER_ALLOC (receive path only)
- zero File.dest_state; include log-file-format in report_dest_info;
add STATUS_DELETE_LIMIT name; recognize --skip-compress as a
separate-value option; OOM-guard send_list_only root entry; drop the
dead -M= branch; record the bare relative protected prefix for -R
size-prunes in both scanners; refresh delete-manifest comment
- pin the rsync tarball sha256 and bump integrator image to v11
Tests: temp-dir rejection/relative/cross-device, server timeout floor,
delete-missing dir budget regression, compress-choice=auto e2e,
max-alloc=0 receive mapping, dest_state, report_dest_info modes,
skip-compress dash value, -M short forms, -R root size-prune mirror
protection (rsync 3.4.1 confirmed).
- Scope the --delete extras walk to directories synchronized by the
transfer: add a synchronized-directory section to the delete manifest
(protocol 2.23.0) so --files-from subsets no longer delete untransmitted
paths outside listed directory subtrees (data-loss fix).
- Separate --max-size/--min-size prune protection from --delete-excluded so
size-pruned source mirrors survive (rsync parity).
- Unlink extraneous destination symlinks instead of skipping them.
- Make --max-delete partial (delete up to N, skip the rest) and exit 25;
accept negative values as unlimited.
- Draw --delete-missing-args deletions from the shared --max-delete budget.
- Honor --force during --delay-updates publication.
Add unit and integration regression tests; update the pinned config wire
golden and version strings for the 2.23.0 manifest/status additions.
#289 checksum/compression:
- -c/--checksum now implies the incremental content quick-check (without
implying -t), so an unchanged file is skipped like rsync.
- --checksum-choice/--cc accepts xxh64/xxhash, xxh3, xxh128, md5 and auto;
md4/sha1/none and the two-name form are rejected by name.
- --compress-choice/--zc rejects lz4/zlib/zlibx by name (zstd/none/auto kept).
- --checksum-seed=0 is randomized per transfer and sent on the wire.
- --skip-compress uses rsync 3.4.1's default suffix list; slash separators and
dot-less suffixes are accepted.
- add --no-whole-file.
#295 timeouts/alloc/temp-dir:
- --timeout default 0 (disabled), --contimeout default 60; 0 disables both,
plus --no-timeout/--no-contimeout.
- --max-alloc=0 means no allocation limit (was rejected).
- --temp-dir accepts any dir, requires it to exist, and falls back to a
non-atomic copy on EXDEV instead of aborting.
#296 connectivity/daemon:
- -M/--remote-option is rejected for daemon/TCP destinations (SSH-only).
- --trust-sender clarified as receiver-local; server-path tests added.
- --stop-at accepts rsync's full date form (y-m-dTh:m etc.).
Adds unit and integration coverage; no wire-field change, PROTOCOL_VERSION stays
2.22.0.
- #286: --numeric-ids is a mapping modifier only; it no longer activates
chown by itself (identity_active_enabled/owner/group predicates), and
--fake-super stores the resolved mapping instead of real-chowning.
- #286: apply owner/group to directories via the deferred directory
metadata path; capture+transmit+apply directory xattrs/ACLs (-aX/-aA),
including default ACLs, in STATUS_MKDIR/STATUS_DIR_TIMES.
- #294: --usermap/--groupmap support inclusive ranges, '*', empty FROM
(unnamed ids), and receiver-side TO name resolution; --chown mixing with
a same-side map is rejected like rsync.
- Protocol 2.22.0 -> 2.23.0 (map wire entry gains from_hi + to_name;
dir frames gain a bounded xattr block).
#291:
- Compile --exclude/--include/--exclude-from/--include-from into the SAME
ordered rule list as --filter/-f (first match wins), so the common
`--include='*.txt' --exclude='*'` idiom and include-alone semantics match
rsync. The legacy per-kind scanner arrays are no longer applied.
- -x/--one-file-system emits the cross-device mount-point directory entry
(empty) instead of dropping it, in both the sequential and parallel scanners.
- Stop passing the legacy arrays to the scanner; document -f is --filter.
#292:
- New src/shared/format.c/.h: rsync "big_num" (comma-grouped integers) and
decimal -h human sizes, %M/%t timestamp, and the STATUS_DEST_INFO codec.
- Receiver answers each STATUS_CHECK with a pre-transfer destination snapshot
(new report_dest_info wire field + STATUS_DEST_INFO, PROTOCOL_VERSION
2.23.0) so the sender can render true itemize columns.
- Itemize now emits rsync-correct update/type chars and c/s/t/p/o/g columns
for files, dirs, symlinks and hard links, comparing size/time/perms/owner/
group against the reported destination.
- --out-format gains %i %n %f %l %b %M %t %o %p %B %U %G %L; %f is the
relative display path, %M the YYYY/MM/DD-HH:MM:SS form, %b the literal
bytes sent.
- --list-only prints transfer-relative names, directory entries and ls-style
grouped sizes.
- --stats prints rsync's multi-line block on stdout; -h uses decimal units.
Tests: unit tests for the filter ordering, format primitives, itemize
columns; integration + differential tests against real rsync 3.4.1 for
itemize/out-format/list-only/selection and -x. Golden wire len/hash and
protocol version strings updated for 2.23.0.
Implement rsync 3.4.1 client-CLI parity:
- cluster boolean shorts (-av, -aAX, -rlpt) and accept attached values
(-B1048576, -essh, -Mfoo); add the -r, -b, -L and -B short aliases
(-r is a faithful no-op since FastSync is always recursive)
- stop OPT_NOOP (-s/--secluded-args, -r/--recursive) from swallowing the
next argv
- add inline --opt=value for every value-taking long option, including
--exclude/--include/--exclude-from/--include-from/--log-file (#291)
- accept --port on the server CLI in addition to -p (#296)
- reject unknown flags naming the flag and stating it is unsupported
Unit tests cover clustering, attached/inline values, the OPT_NOOP
argument-consumption fix and rejected shorts.
Split FastSync's single use_metadata bundle into four independent rsync-parity attributes: preserve_perms, preserve_times, preserve_owner, preserve_group. use_metadata is now a derived transport bit (config_derived_use_metadata).
CLI: real -p/--perms, -t/--times, -o/--owner, -g/--group plus --no-perms/--no-times/--no-owner/--no-group (short and long) and --no-preserve; -a is now rsync -rlptgoD; --preserve = -pt; -A implies -p; -X does not; --chmod implies -p; --usermap/--groupmap/--chown imply owner/group per side; --incremental/--delta still auto-preserve unless negated.
Receiver: per-attribute FileAttrPolicy gating for files, dirs (modes applied at end of transfer), symlinks and specials; rsync -E read-bit rule; new files get source_mode & ~umask sanitized (no group/other write); per-side identity resolution; deferred directory metadata; batch dir-metadata replay; daemon modules without 'client owner = yes' no longer refuse plain -a but force super off (no ownership) with a warning.
Wire: PROTOCOL_VERSION 2.21.0 -> 2.22.0 (four appended config bools, golden 653 / 95530566005420798). FileMetadata/chunk/batch framing unchanged. Docs/CHANGELOG/CMake updated to 2.22.0.
Bring README.md and RSYNC_COMPAT.md in line with the actual code/CLI and add
an automated guard so they cannot silently drift again.
Waves A-E:
- Correct stale compatibility claims: archive is `-rlptD` (owner/group are
opt-in via identity flags, not implied), and symlinks, hard links, xattrs,
ACLs and `--dirs` are implemented.
- Remove documented-but-nonexistent features: the six unread FASTSYNC_* env
vars, and `--client-cn` (server-only) from the client table.
- Repair the corrupted "Implementation Details" section (broken list numbering
and emphasis) and correct it against the source.
- Sync the client and server option tables with usage.c / server_cli.c, and
document server-contacting `--dry-run` (protocol 2.21.0).
- Hygiene: `# FastSync` heading, real build commands, consistent binary names,
runnable TLS examples, daemon module keys.
Also align the client `--help` / archive log wording and the RSYNC_COMPAT
archive rows with the opt-in ownership model, and add
tests/integration/test_readme_consistency.py (marked `ci`) asserting every
documented FASTSYNC_* var is read in src/ and every documented client/server
flag appears in the corresponding `--help`.
- parse_ull_arg() rejects a leading '-'/'+' (strtoull would silently wrap
-1 to ULLONG_MAX) and --chunk-size/--delta-max enforce their upper bounds.
- Escape local untrusted paths before logging (client_send, scanner,
--filter rule, pattern-file reads) with output_escape(..., 8-bit mode).
- Read --exclude-from/--include-from through the bounded line reader.
- Open --log-file with O_NOFOLLOW|O_CLOEXEC, mode 0600, via open+fdopen;
create --write-batch with O_NOFOLLOW|O_CLOEXEC, mode 0600.
- Reject --dry-run together with --write-batch (dry-run must not write the
batch file), alongside the existing --read-batch/--only-write-batch rules.
Tests: signed/oversized numeric rejection, over-long pattern file, dry-run +
write-batch unit and integration coverage.
Extend _snapshot_tree to record mode, inode, xattrs, directories and
special nodes, and add coverage proving a server-contacting --dry-run
leaves the destination structurally identical for --delay-updates,
--backup, symlinks, hardlinks, FIFOs, and daemon modules (including a
read-only module). Add a regression test for the --read-batch --dry-run
refusal and for a missing/non-directory receive root failing a dry-run
exactly like a real run.
Fix stale version comments (2.20.0/633 -> 2.21.0/637) and RSYNC_COMPAT's
current --protocol value, and add a unit assertion that
--server-port/--port (and --server-host) set the dry-run routing bit.
--dry-run now handshakes with a remote/daemon receiver and reports what
WOULD transfer/skip based on receiver state, mutating nothing on either
side.
- Serialize Config.dry_run into the wire config frame and append
STATUS_DRY_RUN_TRANSFER to the status enum (no renumbering); bump
PROTOCOL_VERSION/CMake VERSION/CHANGELOG/golden wire to 2.21.0.
- Receiver: receive_incremental_check_ex runs the normal read-only
decision and answers STATUS_OK (skip) or STATUS_DRY_RUN_TRANSFER
(would transfer) with no basis materialization/append/delta/full
transfer. All mutation sites are guarded by !dry_run: file store,
manifest deletes, --mkpath root creation, --delay-updates staging,
publication, directory-time application, and outcome acks.
- Client: send_dry_run_remote connects, sends the config, checks each
regular file and prints the would-transfer set + trailer; no file data
or delete manifest is sent. Plain local destinations keep the
client-side manifest.
Daemon modules that declare 'auth users' no longer accept credentials over a
remote plaintext connection: server_module_gate refuses at the config gate,
before any SCRAM challenge is sent, unless the connection is verified TLS with
a client certificate matching --client-cn, or a local/SSH transport (loopback
TCP peer or the --stdio pipe). --allow-unauthenticated does not relax this.
The TLS client-CN comparison now uses credentials_secure_equal (S2). Clients
sending --password-file to a non-loopback daemon must use --tls; validate_config
rejects the plaintext case before any network I/O.
Adds utils_sockaddr_is_loopback / utils_fd_peer_is_local / utils_host_is_loopback
helpers with unit tests, a client validation unit test, and integration tests
for the client-side plaintext rejection and the wrong-CN gate refusal.
- server_cli: handle --password-file/--early-input/--iconv via arg_has_value
in one place, removing the unreachable duplicate separate-form arms while
keeping both --opt VALUE and --opt=VALUE working
- client_cli: factor the triplicated --delta-block/--block-size range check
into set_delta_block_size(); drop the redundant use_metadata assignment
after identity_parse_copy_as (the parser already forces it)
- tests: cover both spellings of --iconv/--delta-block, make the archive
short-form test actually call parse_args, add delta-block invalid cases
Add the receiver-side --super / --no-super tri-state (Config->super_mode)
under the safe-subset + clear-refusal privilege model: FastSync never
elevates privileges, it only permits super-user attempts that are already
confined fd-relative below the authorized receive root.
- identity: privilege_super_permitted() gate (OFF=false, ON=true, AUTO follows
geteuid()==0); identity_apply_ownership/_link become no-ops when not
permitted; --super with no explicit identity policy implies raw numeric-id
preservation (explicit usermap/groupmap/chown/numeric-ids still win); warn
exactly once when --super is requested by a non-root receiver.
- file_receive: gate char/block device-node creation on the gate; FIFO/socket
handling is unchanged.
- wire: trailing super_mode int after the --iconv spec, validated 0..2 in
receive_privilege_options and validate_received_config; PROTOCOL_VERSION
2.17.0 -> 2.18.0; version-sensitive tests and docs updated.
- CLI: --super/--no-super parsed explicitly before the generic --no-* branch
(malformed --super=x rejected); usage text added.
- tests: config wire round-trip + invalid-value rejection, privilege-gate mode
unit test, CLI parse test, integration transfer + root-gated ownership
suppression/appliance tests.
- docs: RSYNC_COMPAT --super row + Wave E note, protocol mentions, README.
Force the receiver to apply the requested owner/group to every written
entry through the confined fd-relative identity path instead of switching
the process credentials (unsafe for the multithreaded receiver). An
unprivileged receiver refuses the transfer up front in server_module_gate,
before STATUS_OK, so no data is written with the wrong ownership.
- new Config fields copy_as_set/copy_as_uid/copy_as_gid + defaults
- identity_parse_copy_as (name/@N/* resolution, primary-gid default,
gid==uid fallback for numeric ids with no passwd entry); implies -M
- identity snapshot + highest-priority forcing in identity_resolve_targets
- identity_copy_as_refused() helper
- trailing config-frame block (presence int + two int32 ids, >=0 checked)
- PROTOCOL_VERSION 2.17.0 -> 2.18.0; version-sensitive tests updated
- unit tests for parse + wire round-trip/negative-id rejection
- integration TestCopyAs: unprivileged refusal + root chown assertion
- RSYNC_COMPAT.md --copy-as row updated (safe subset + divergence); README
protocol version refreshed
Wave D of Phase 7. Make -O/--omit-dir-times and -J/--omit-link-times real by
preserving directory and symlink times, and mark --secluded-args as an explicit
Impossible/Divergence no-op.
Wire: PROTOCOL_VERSION 2.16.0 -> 2.17.0. Adds a terminal STATUS_DIR_TIMES frame
(int count + (wire path, metadata) pairs) sent after all file data and the
optional delete manifest. STATUS_MKDIR also carries metadata for --dirs entries.
Config-frame layout is unchanged.
Sender: the recursive scanner captures every traversed source directory (both
DirectoryScanner and the parallel scanner root + workers, appends mutex-guarded)
into a shared list; the single-threaded and -m paths transmit it last.
Receiver: a DirTimeList accumulates received directory metadata and applies it
with fd-relative no-follow utimensat only at the very end -- after all children,
after the commit-style --delete, and after --delay-updates publication -- in the
single-threaded success frame and in server.c after the -m threads join. -O skips
the application. Symlink metadata is applied at link creation with
utimensat/fchownat/fchmodat AT_SYMLINK_NOFOLLOW; -J suppresses only link times.
identity_apply_ownership_link shares the identity resolver with the fd path.
Docs: -O/-J rows -> Implemented; --secluded-args -> Impossible/Divergence;
--protocol accepted/rejected values and Phase-6/7 notes updated.
Tests: unit (scanner dir capture, DirTimeList apply, symlink metadata, protocol
version values) and integration (dir mtime round-trip + -O, symlink mtime
round-trip + -J, independent suppression), parameterized over single/multithread.
- fake_super_restore_fd now sanitizes mode like metadata_mode (never grants
S_IWGRP|S_IWOTH; 0666 -> 0644), fixing a privilege regression
- --sparse takes precedence over --preallocate (skip posix_fallocate when
sparse) so holes are not re-allocated; docs corrected
- --partial retention disabled under --no_replace (ignore/existing) and only
marks write_attempted after the write begins (no empty-temp retention)
- accept --block-size=SIZE / --delta-block=SIZE inline forms; neutral messages
- fake-super EPERM/EACCES skipped silently (docs aligned); EINVAL still logged
- sparse unit test now memcmp's the full buffer; TestBlockSize integration keeps
the destination basis so delta is genuinely exercised
- unit 37/37, cppcheck 0, clang-format 0
- write_all_sparse: skips all-zero runs >= 4096 bytes via lseek(SEEK_CUR) and
ftruncates the final size, wired into the atomic temp+rename and --inplace
paths with no wire change (full image already in memory).
- --partial retention: on a save failure after the temp held data, rename the
already-written temp to the destination path (best-effort; falls through to
unlink; never retains when --partial is off) so --append/--append-verify can
resume; tested by forcing futimens EINVAL with an out-of-range nsec.
- --block-size aliases --delta-block; verified config->delta_block_size is
honored by the delta engine end-to-end (unit + integration tests).
- fake_super_restore_fd: parses and re-applies user.fastsync.stat fd-relative
(fchown best-effort/non-root skipped, fchmod, futimens); a save under
--fake-super now both records and re-applies.
- -N/--crtimes and --stderr=client promoted to a new 'Impossible/Divergence'
status bucket (Summary: 136/2/4/3/2 = 147).
- cppcheck/clang-format clean; unit 37/37; integration 407 passed.
- revert over-eager replacement of setfacl -m in test_features.py
- use --chunk-serialization (+ set dirs) in the two append/append-verify
chunk-serialization rejection unit tests so they exercise the real check
- rename archive-negation integration test (--no-preserve is inert under
archive because devices/specials force metadata)
- update stale (-c)/(-m)/(-s)/(-f) display labels and RSYNC_COMPAT -c/-m refs
- document the --no-perms negation limitation in the Wave A note
-c -> --checksum, -m -> --prune-empty-dirs, -M -> --remote-option,
-f -> --filter, -s -> --secluded-args, -p -> --perms, -T -> --temp-dir;
-a/--archive is now real rsync -rlptgoD (links+metadata+devices+specials).
FastSync's own flags moved to long-form-only or new shorts:
-j/--threads (multithreading), --preserve (metadata), --sendfile,
--chunk-serialization, --timeout, --ssh-port. Client-side only; the
wire config fields are unchanged (no PROTOCOL_VERSION bump). The server
keeps -p as its port. Docs (README, RSYNC_COMPAT summary 129->132) and
unit/integration tests updated. 37/37 unit, 400-pass integration.
opencode
TapTap