rsync 3.4.1 resolves --partial-dir after option parsing and sets keep_partial,
so --partial-dir=DIR alone retains an interrupted transfer's partial file.
FastSync only used the partial dir when --partial was also given, silently
discarding it otherwise.
Set Config->partial in cli_finalize_config whenever partial_dir is set.
Following rsync, an explicit --no-partial does NOT win (verified on rsync
3.4.1 in either option order); --inplace is guarded because it writes the
destination in place with no partial staging.
Tests: CLI unit coverage for the implication/precedence/inplace guard, and a
deterministic integration case that blocks the final install (non-empty
directory at the destination) and asserts the staged partial survives under
--partial-dir alone.
- plain --delete with no timing flag now selects delete-during (progressive
deletion, matching rsync and avoiding the full old+new tree peak)
- new long-only FastSync --delete-commit restores the old atomic behavior
(delete only after the whole transfer succeeds); timing-identical to
--delete-after, implemented via the same wire bool
- timing flags are mutually exclusive; --delete-commit conflicts with other
timings; --delete-before/--delete-during rows reworded per Phase-0 probes
- CHANGELOG migration note; tally unchanged 116/14/27
- --bwlimit: faithful port of rsync 3.4.1 parse_size_arg (default KiB/s,
binary K/M/G/T/P, decimal KB/MB, KiB/MiB, decimals, 0 = unlimited, 512-byte
floor, (size+512)/1024 quantization). Unit tests + docs.
- --info: wire del/remove/name/flist/nonreg/progress to real FastSync events in
rsync's line format (deleting PATH, sender removed NAME, name lines,
'sending incremental file list', skipping non-regular file "NAME"); name no
longer aliases copy; --info=progress drives the progress path and report_stats.
- --ignore-errors: match rsync's default -- a source I/O error skips deletion
unless --ignore-errors, while the readable tree still transfers and the run
exits 23. Covers all delete timings and both send paths.
- --iconv now matches rsync's push direction: the destination charset is the
client spec's REMOTE half, so a default receiver writes wire names verbatim;
a server's own --iconv LOCAL overrides it (daemon charset analog). Updated
unit + integration tests and added a default-server differential gate case.
- Empty-directory emission is gated behind a new ScannerOptions.emit_empty_dirs
set only by the real sender, so low-level scanner helpers keep the historical
file-only list.
- --temp-dir reclassified to Divergent: relative dirs match rsync exactly
(resolved under the destination), but an absolute path is deliberately
rejected by the confined receiver; differential test added.
- Docs/tally: 109 Parity / 22 Caveat / 25 Divergent.
- Recursive scans emit a directory entry for every traversed directory that
produced no transferred child, so empty source dirs (and dirs emptied by
filtering) are recreated like rsync; -m prunes them, --files-from/--list-only
never emit implicit dirs.
- A directory entry now replaces a destination regular file (rsync removes the
non-directory) instead of aborting; confined to the secure parent fd.
- -R --no-implied-dirs --files-from: stop refusing a listed file whose parent
is not listed; create the implied parent with default attributes (no source
metadata is captured for it), matching rsync 3.4.1.
- Differential gate: drop min_size/empty_dirs_recursive/dirs_plain allowlist
entries (dirs_plain now hands FastSync the same trailing-slash source as
rsync); add differential test for the files-from implied parent.
- Docs: -d row -> Parity, tally 108/24/24.
No wire change (PROTOCOL_VERSION stays 2.26.0).
Reclassify the RSYNC_COMPAT matrix after the parity-completion wave (protocol
2.23.0 -> 2.26.0): 9 already-parity rows to parity, 17 inherently non-rsync
rows to divergent, and the genuine fixes to parity, recounting to
109 parity / 25 caveat / 23 divergent of 157 rows. Add rows for --bwlimit,
--partial, --partial-dir, --no-whole-file, --inc-recursive/--no-inc-recursive,
--protect-args and --msgs2stderr; fix the documented -f/filter, -F/.rsync-filter,
empty --files-from, and --preallocate/--sparse precedence bugs; add the Parity
Completion Wave section.
Refresh README/HANDOFF/release skill/cmake-expert to protocol 2.26.0 and the
zlib/lz4 + md4/sha1/none codecs, add the CHANGELOG 2.26.0 entry, and correct
the stale --max-delete --help wording.
Accept the full rsync 3.4.1 --info (backup, del, flist, mount, nonreg,
progress, remove, symsafe) and --debug (acl, backup, bind, chdir, connect,
cmd, del, deltasum, dup, exit, filter, flist, fuzzy, genr, hash, hlink,
iconv, nstr, own, recv, send, time) vocabularies, plus the historical
syms/hl/owner aliases, with level suffixes. Categories FastSync already
emits (copy/name/misc/skip/stats and io/proto/pack/util) still set their
log flags; the rest are accepted but silent. Unknown names remain
rejected by name, matching rsync. Update the CLI unit tests and the
rsync-parity integration tests (previously they required del/filter to be
rejected).
Accept the full rsync 3.4.1 --compress-choice set (zstd/lz4/zlib/zlibx/
none/auto) and the two-name --checksum-choice TRANSFER,PRE-TRANSFER form,
including rsync's 'none' rules (rejected with --checksum at exit 4, and
forcing --whole-file as the transfer half) and unknown names at exit 4.
The checksum default becomes the auto-negotiated xxh128.
Negotiation is deterministic and symmetric: both peers run the same
preference resolver (rsync's --version order). The resolved
compression_algo crosses the wire as a new trailing config-frame int so
the receiver validates and installs the exact codec; an unsupported
choice is refused before STATUS_OK like rsync's failed negotiation.
Bump PROTOCOL_VERSION to 2.26.0.
- --chmod no longer implies --preserve-perms; repeated --chmod options
accumulate, and D/F/X selectors plus s/t special bits are supported with
rsync's exact parse_chmod/tweak_mode semantics.
- Stop masking group/other write and setuid/setgid/sticky: -p copies the
source mode exactly, no-p new entries use source&~umask, directories keep
setgid/sticky, and special nodes follow the same rules.
- Apply ownership before mode on the fd path so a chown cannot clear the
setuid/setgid bits -p just restored (rsync order).
- Update unit and integration tests, including differential checks against
rsync 3.4.1.
#289 checksum/compression:
- -c/--checksum now implies the incremental content quick-check (without
implying -t), so an unchanged file is skipped like rsync.
- --checksum-choice/--cc accepts xxh64/xxhash, xxh3, xxh128, md5 and auto;
md4/sha1/none and the two-name form are rejected by name.
- --compress-choice/--zc rejects lz4/zlib/zlibx by name (zstd/none/auto kept).
- --checksum-seed=0 is randomized per transfer and sent on the wire.
- --skip-compress uses rsync 3.4.1's default suffix list; slash separators and
dot-less suffixes are accepted.
- add --no-whole-file.
#295 timeouts/alloc/temp-dir:
- --timeout default 0 (disabled), --contimeout default 60; 0 disables both,
plus --no-timeout/--no-contimeout.
- --max-alloc=0 means no allocation limit (was rejected).
- --temp-dir accepts any dir, requires it to exist, and falls back to a
non-atomic copy on EXDEV instead of aborting.
#296 connectivity/daemon:
- -M/--remote-option is rejected for daemon/TCP destinations (SSH-only).
- --trust-sender clarified as receiver-local; server-path tests added.
- --stop-at accepts rsync's full date form (y-m-dTh:m etc.).
Adds unit and integration coverage; no wire-field change, PROTOCOL_VERSION stays
2.22.0.
- #286: --numeric-ids is a mapping modifier only; it no longer activates
chown by itself (identity_active_enabled/owner/group predicates), and
--fake-super stores the resolved mapping instead of real-chowning.
- #286: apply owner/group to directories via the deferred directory
metadata path; capture+transmit+apply directory xattrs/ACLs (-aX/-aA),
including default ACLs, in STATUS_MKDIR/STATUS_DIR_TIMES.
- #294: --usermap/--groupmap support inclusive ranges, '*', empty FROM
(unnamed ids), and receiver-side TO name resolution; --chown mixing with
a same-side map is rejected like rsync.
- Protocol 2.22.0 -> 2.23.0 (map wire entry gains from_hi + to_name;
dir frames gain a bounded xattr block).
#287:
- --safe-links: keep safe in-tree links AS symlinks and skip unsafe
(absolute or ".."-escaping) ones, mirroring rsync's unsafe_symlink().
Skipped links are recorded as delete-protected so --delete does not
remove their destination mirror (no silent data loss).
- --copy-unsafe-links: preserve safe links as symlinks and dereference
only unsafe ones.
- --munge-links: receiver-side rewrite storing /rsyncd-munged/-prefixed
targets (rsync parity), replacing the no-op #SYMLINK sender prefix.
- -l: store the target verbatim, including absolute and ".." targets
(rsync -l parity); the old receiver containment silently dropped them.
#288:
- --specials: recreate unix-domain sockets via mknod(S_IFSOCK), which
Linux permits unprivileged; keep EEXIST/EPERM skip behavior.
- --copy-devices: copy a device's content into a regular file when
requested; skip unrequested non-regular entries like rsync's default.
#291:
- Compile --exclude/--include/--exclude-from/--include-from into the SAME
ordered rule list as --filter/-f (first match wins), so the common
`--include='*.txt' --exclude='*'` idiom and include-alone semantics match
rsync. The legacy per-kind scanner arrays are no longer applied.
- -x/--one-file-system emits the cross-device mount-point directory entry
(empty) instead of dropping it, in both the sequential and parallel scanners.
- Stop passing the legacy arrays to the scanner; document -f is --filter.
#292:
- New src/shared/format.c/.h: rsync "big_num" (comma-grouped integers) and
decimal -h human sizes, %M/%t timestamp, and the STATUS_DEST_INFO codec.
- Receiver answers each STATUS_CHECK with a pre-transfer destination snapshot
(new report_dest_info wire field + STATUS_DEST_INFO, PROTOCOL_VERSION
2.23.0) so the sender can render true itemize columns.
- Itemize now emits rsync-correct update/type chars and c/s/t/p/o/g columns
for files, dirs, symlinks and hard links, comparing size/time/perms/owner/
group against the reported destination.
- --out-format gains %i %n %f %l %b %M %t %o %p %B %U %G %L; %f is the
relative display path, %M the YYYY/MM/DD-HH:MM:SS form, %b the literal
bytes sent.
- --list-only prints transfer-relative names, directory entries and ls-style
grouped sizes.
- --stats prints rsync's multi-line block on stdout; -h uses decimal units.
Tests: unit tests for the filter ordering, format primitives, itemize
columns; integration + differential tests against real rsync 3.4.1 for
itemize/out-format/list-only/selection and -x. Golden wire len/hash and
protocol version strings updated for 2.23.0.
Implement rsync 3.4.1 client-CLI parity:
- cluster boolean shorts (-av, -aAX, -rlpt) and accept attached values
(-B1048576, -essh, -Mfoo); add the -r, -b, -L and -B short aliases
(-r is a faithful no-op since FastSync is always recursive)
- stop OPT_NOOP (-s/--secluded-args, -r/--recursive) from swallowing the
next argv
- add inline --opt=value for every value-taking long option, including
--exclude/--include/--exclude-from/--include-from/--log-file (#291)
- accept --port on the server CLI in addition to -p (#296)
- reject unknown flags naming the flag and stating it is unsupported
Unit tests cover clustering, attached/inline values, the OPT_NOOP
argument-consumption fix and rejected shorts.
Split FastSync's single use_metadata bundle into four independent rsync-parity attributes: preserve_perms, preserve_times, preserve_owner, preserve_group. use_metadata is now a derived transport bit (config_derived_use_metadata).
CLI: real -p/--perms, -t/--times, -o/--owner, -g/--group plus --no-perms/--no-times/--no-owner/--no-group (short and long) and --no-preserve; -a is now rsync -rlptgoD; --preserve = -pt; -A implies -p; -X does not; --chmod implies -p; --usermap/--groupmap/--chown imply owner/group per side; --incremental/--delta still auto-preserve unless negated.
Receiver: per-attribute FileAttrPolicy gating for files, dirs (modes applied at end of transfer), symlinks and specials; rsync -E read-bit rule; new files get source_mode & ~umask sanitized (no group/other write); per-side identity resolution; deferred directory metadata; batch dir-metadata replay; daemon modules without 'client owner = yes' no longer refuse plain -a but force super off (no ownership) with a warning.
Wire: PROTOCOL_VERSION 2.21.0 -> 2.22.0 (four appended config bools, golden 653 / 95530566005420798). FileMetadata/chunk/batch framing unchanged. Docs/CHANGELOG/CMake updated to 2.22.0.
Bring README.md and RSYNC_COMPAT.md in line with the actual code/CLI and add
an automated guard so they cannot silently drift again.
Waves A-E:
- Correct stale compatibility claims: archive is `-rlptD` (owner/group are
opt-in via identity flags, not implied), and symlinks, hard links, xattrs,
ACLs and `--dirs` are implemented.
- Remove documented-but-nonexistent features: the six unread FASTSYNC_* env
vars, and `--client-cn` (server-only) from the client table.
- Repair the corrupted "Implementation Details" section (broken list numbering
and emphasis) and correct it against the source.
- Sync the client and server option tables with usage.c / server_cli.c, and
document server-contacting `--dry-run` (protocol 2.21.0).
- Hygiene: `# FastSync` heading, real build commands, consistent binary names,
runnable TLS examples, daemon module keys.
Also align the client `--help` / archive log wording and the RSYNC_COMPAT
archive rows with the opt-in ownership model, and add
tests/integration/test_readme_consistency.py (marked `ci`) asserting every
documented FASTSYNC_* var is read in src/ and every documented client/server
flag appears in the corresponding `--help`.
- server_module_gate: refuse client-chosen ownership against the ORIGINAL config
so an explicit --super is still refused under an operator --no-super veto
(the veto must not turn a refusal into an accept).
- credentials: open-then-fstat the exact secret inode, require current-user
ownership and no group/other bits, but continue to allow process-substitution
FIFOs; removes the stat->fopen TOCTOU.
- file.c preallocate + protocol.c send-string debug logs escape attacker paths.
- usage/RSYNC_COMPAT updated for --old-args no-op and secret-file rules.
- file_ensure_directory_secure() now chowns a final directory it creates under
--copy-as and fails on error; the symlink parent-creation call site propagates
it. The is_dir branch fails when the confined parent cannot be opened under
--copy-as. Closes the residual wrong-owner gap for synthesized/symlink
parent directories.
- file_restore_symlink_metadata() early NULL return is copy-as-aware.
- Preserve errno across the implicit-parent failure cleanup.
- Neutral skip messages (the clamp, not --no-super, may be responsible).
- Daemon copy-as test tolerates the non-root privilege refusal; usage text lists
--copy-as.
- H3: a daemon module without 'client owner = yes' now also has super-user
device activity forced off (char/block mknod, --write-devices), so a root
daemon can no longer be made to create/write raw devices under AUTO. The
entries are skipped, preserving ordinary -a pushes.
- H1/H2: propagate a failed required --copy-as chown from symlink metadata
restore and implicitly-created parent directories, so the entry (and run)
reports failure instead of a wrong-owner success.
- Docs/help/headers updated for A2/A3 and the device clamp; startup warning
spells out the client-owner risk.
- Tests: daemon device clamp (skipped without opt-in, created with opt-in),
updated --super/--fake-super expectations.
Add the receiver-side --super / --no-super tri-state (Config->super_mode)
under the safe-subset + clear-refusal privilege model: FastSync never
elevates privileges, it only permits super-user attempts that are already
confined fd-relative below the authorized receive root.
- identity: privilege_super_permitted() gate (OFF=false, ON=true, AUTO follows
geteuid()==0); identity_apply_ownership/_link become no-ops when not
permitted; --super with no explicit identity policy implies raw numeric-id
preservation (explicit usermap/groupmap/chown/numeric-ids still win); warn
exactly once when --super is requested by a non-root receiver.
- file_receive: gate char/block device-node creation on the gate; FIFO/socket
handling is unchanged.
- wire: trailing super_mode int after the --iconv spec, validated 0..2 in
receive_privilege_options and validate_received_config; PROTOCOL_VERSION
2.17.0 -> 2.18.0; version-sensitive tests and docs updated.
- CLI: --super/--no-super parsed explicitly before the generic --no-* branch
(malformed --super=x rejected); usage text added.
- tests: config wire round-trip + invalid-value rejection, privilege-gate mode
unit test, CLI parse test, integration transfer + root-gated ownership
suppression/appliance tests.
- docs: RSYNC_COMPAT --super row + Wave E note, protocol mentions, README.
- write_all_sparse: skips all-zero runs >= 4096 bytes via lseek(SEEK_CUR) and
ftruncates the final size, wired into the atomic temp+rename and --inplace
paths with no wire change (full image already in memory).
- --partial retention: on a save failure after the temp held data, rename the
already-written temp to the destination path (best-effort; falls through to
unlink; never retains when --partial is off) so --append/--append-verify can
resume; tested by forcing futimens EINVAL with an out-of-range nsec.
- --block-size aliases --delta-block; verified config->delta_block_size is
honored by the delta engine end-to-end (unit + integration tests).
- fake_super_restore_fd: parses and re-applies user.fastsync.stat fd-relative
(fchown best-effort/non-root skipped, fchmod, futimens); a save under
--fake-super now both records and re-applies.
- -N/--crtimes and --stderr=client promoted to a new 'Impossible/Divergence'
status bucket (Summary: 136/2/4/3/2 = 147).
- cppcheck/clang-format clean; unit 37/37; integration 407 passed.
-c -> --checksum, -m -> --prune-empty-dirs, -M -> --remote-option,
-f -> --filter, -s -> --secluded-args, -p -> --perms, -T -> --temp-dir;
-a/--archive is now real rsync -rlptgoD (links+metadata+devices+specials).
FastSync's own flags moved to long-form-only or new shorts:
-j/--threads (multithreading), --preserve (metadata), --sendfile,
--chunk-serialization, --timeout, --ssh-port. Client-side only; the
wire config fields are unchanged (no PROTOCOL_VERSION bump). The server
keeps -p as its port. Docs (README, RSYNC_COMPAT summary 129->132) and
unit/integration tests updated. 37/37 unit, 400-pass integration.
TapTap
opencode