RSYNC_COMPAT.md

@@ -85,8 +85,8 @@ Every one of those has an entry below with its remaining caveats.
 | `-q`, `--quiet` | Suppress non-error messages | ✅ Parity | Suppresses client output while preserving errors |
 | `--help` | Show help | ✅ Parity | Prints usage and exits. A lone `-h` with no other transfer arguments also prints help (protocol 2.26.0), matching the rsync idiom; `-h` alongside a transfer keeps its rsync meaning of `--human-readable` (see that row) |
 | `-V`, `--version` | Print version | ✅ Parity | |
-| `--info=FLAGS` | Fine-grained info verbosity | ⚠️ Caveat | Accepts rsync 3.4.1's full `--info` vocabulary — `backup`, `copy`, `del`, `flist`, `misc`, `mount`, `name`, `nonreg`, `progress`, `remove`, `skip`, `stats`, `symsafe`, `all`, `none` — with optional level suffixes (`--info=stats2`), so a valid rsync invocation is never rejected up front. Protocol 2.27.0 wires the categories that map to a real FastSync event, matching rsync's line format: `name` prints the updated entry names (with the ` -> target` link suffix), `flist` prints `sending incremental file list`, `del` prints `deleting PATH` (or `*deleting   PATH` under `-i`/`--out-format`) for both dry-run would-delete and real deletions (real runs carry the removed paths over the new `report_deletes` wire bool), `remove` prints `sender removed PATH`, `nonreg` prints `skipping non-regular file "NAME"`, `progress` drives the per-file progress output, and `copy`/`misc`/`skip`/`stats` keep their existing channels. `none` suppresses info output, explicit flags override `--verbose`, and a genuinely unknown name is still rejected by name (matching rsync). **Fixed (no-wire):** `--info=name2` (and higher) also prints rsync's `NAME is uptodate` lines for entries the receiver already has, and `--info=name` emits the leading transfer-root `./` name line before the first transferred entry (the marker rides in the existing `info_level` bitset; differential tests vs rsync 3.4.1). **Caveat:** the root `./` line is emitted before the first transferred name rather than keyed off rsync's root-attribute-change decision, so a pre-existing root that rsync leaves untouched can differ; the categories with no client-observable event stay accepted-but-silent — `symsafe`, `mount`, and `backup` (the backup happens on the receiver, which FastSync's protocol does not echo back); and `skip` maps to FastSync's sender-side skip logging rather than rsync's receiver-side "not creating new file" lines |
+| `--info=FLAGS` | Fine-grained info verbosity | ⚠️ Caveat | Accepts rsync 3.4.1's full `--info` vocabulary — `backup`, `copy`, `del`, `flist`, `misc`, `mount`, `name`, `nonreg`, `progress`, `remove`, `skip`, `stats`, `symsafe`, `all`, `none` — with optional level suffixes (`--info=stats2`), so a valid rsync invocation is never rejected up front. Protocol 2.27.0 wires the categories that map to a real FastSync event, matching rsync's line format: `name` prints the updated entry names (with the ` -> target` link suffix), `flist` prints `sending incremental file list`, `del` prints `deleting PATH` (or `*deleting   PATH` under `-i`/`--out-format`) for both dry-run would-delete and real deletions (real runs carry the removed paths over the new `report_deletes` wire bool), `remove` prints `sender removed PATH`, `nonreg` prints `skipping non-regular file "NAME"`, `progress` drives the per-file progress output, `copy`/`misc`/`skip` keep their existing channels, `stats` enables the same transfer-statistics block as `--stats`, and `mount` prints rsync's `[sender] skipping mount-point dir NAME` when `-xx` drops a mount-point directory (plain `-x` keeps the empty directory entry and stays silent, matching rsync; both differential-tested). `none` suppresses info output, explicit flags override `--verbose`, and a genuinely unknown name is still rejected by name (matching rsync). **Fixed (no-wire):** `--info=name2` (and higher) also prints rsync's `NAME is uptodate` lines for entries the receiver already has, and `--info=name` emits the leading transfer-root `./` name line before the first transferred entry (the marker rides in the existing `info_level` bitset; differential tests vs rsync 3.4.1). **Caveat:** the root `./` line is emitted before the first transferred name rather than keyed off rsync's root-attribute-change decision, so a pre-existing root that rsync leaves untouched can differ; the categories with no client-observable event stay accepted-but-silent — `symsafe` and `backup` (the backup happens on the receiver, which FastSync's protocol does not echo back); and `skip` maps to FastSync's sender-side skip logging rather than rsync's receiver-side "not creating new file" lines |
-| `--debug=FLAGS` | Fine-grained debug verbosity | ⚠️ Caveat | Protocol 2.26.0 accepts rsync 3.4.1's full `--debug` vocabulary with optional level suffixes. FastSync emits for its own channels (`io`, `proto`, `pack`, `util`, plus the aliases `hl`/`owner`); the rsync-only categories (`acl`, `filter`, `send`, ...) are accepted silently. `--debug=help` lists the flags; a genuinely unknown name is rejected by name. **Caveat:** most accepted rsync categories produce no output (e.g. `acl`, `filter`, `send`, `flist`, `del`, `deltasum`, `hash`, `recv`, `time`), so they are accepted for CLI compatibility only |
+| `--debug=FLAGS` | Fine-grained debug verbosity | ⚠️ Caveat | Protocol 2.26.0 accepts rsync 3.4.1's full `--debug` vocabulary with optional level suffixes. FastSync emits for its own channels (`io`, `proto`, `pack`, `util`, plus the aliases `hl`/`owner`) and maps the remaining categories that have a natural FastSync event onto real debug output: `flist` (per-directory scan progress), `del` (receiver-removed paths, riding the existing `report_deletes` wire bool), `hash`/`deltasum` (whole-file hashing and delta-sum generation), `recv` (receiver verdicts/signatures), `filter` (selection/exclusion decisions) and `send` (files handed to the sender). A normal run prints none of it; `--debug=help` lists the flags and a genuinely unknown name is rejected by name. **Caveat:** the output is FastSync's own timestamped debug format (it does not reproduce rsync's exact per-category lines), and the synthetic/rsync-internal categories (`acl`, `backup`, `bind`, `time`, ...) stay accepted-but-silent, so the row remains ⚠️ |
 | `--stderr=MODE` | Change stderr output mode | ❌ Divergent | `errors` (default) and `all` are supported; `client` is rejected with a clear error (`--stderr=client is not supported`) because FastSync has no rsync client-message channel — the rejection itself is the documented behavior (Phase 7 Wave B decision). The modes that exist work; the missing rsync channel cannot be emulated without a wire change |
 | `--msgs2stderr`, `--no-msgs2stderr` | Deprecated `--stderr` aliases | ⚠️ Caveat | `--msgs2stderr` maps to `--stderr=all` (supported, matching rsync). `--no-msgs2stderr` is rsync's spelling of `--stderr=client`, which FastSync has no client-message channel for, so it maps to the errors-only default instead of reproducing rsync's client mode. See `--stderr=MODE` |
 | `--no-motd` | Suppress daemon MOTD | ✅ Parity | Client-only display switch (Wave C): the daemon still sends the configured `motd file` on a `host::module/path` connection; the client reads and discards the frame without showing it. Without the flag the MOTD is printed to stdout after the config/auth handshake and escaped so control bytes cannot inject terminal sequences |
@@ -98,7 +98,7 @@ Every one of those has an entry below with its remaining caveats.
 
 | Flag | Rsync Description | FastSync Status | Notes |
 |------|-------------------|-----------------|-------|
-| `--stats` | Give transfer stats | ⚠️ Caveat | Prints transfer statistics. Protocol 2.25.0 populates the receiver-only counters the sender cannot observe (`Matched data`, `Number of deleted files`) from the receiver's `STATUS_STATS` report; the sender tracks the scanned file list per type so `Number of files` carries rsync's `(reg: X, dir: Y, link: Z, special: W)` breakdown (directories come from the scanner's captured directory list, present for `-a`/`-t`/`-p`), `Number of regular files transferred` excludes symlinks/specials and up-to-date files, `Total file size` includes symlink target lengths, and `Total transferred file size` counts only transferred files. **Protocol 2.28.0 extends `STATUS_STATS`** with receiver-observed `literal_bytes` and the four `created_*` counters: `Number of created files` now carries rsync's `(reg/dir/link/special)` breakdown (the receiver reports which destination entries it newly created, including implicitly-created parent directories below the transfer root) and `Literal data` is exact for a delta transfer (the receiver counts the literal fragments it stored, not the whole source size) — all differential-tested in the sequential and `--threads` paths against rsync 3.4.1 for fresh-create, update and delta shapes. **Remaining divergences:** a recursive scan that preserves no directory attribute (`-r` without `-t`/`-p`) captures no directory entries, so the `dir:` category is then omitted from `Number of files`; rsync's per-type breakdown on `Number of deleted files` is not reproduced; and `Total bytes sent`/`received` are FastSync wire bytes framed differently from rsync's, so they are not numerically comparable |
+| `--stats` | Give transfer stats | ⚠️ Caveat | Prints transfer statistics. Protocol 2.25.0 populates the receiver-only counters the sender cannot observe (`Matched data`, `Number of deleted files`) from the receiver's `STATUS_STATS` report; the sender tracks the scanned file list per type so `Number of files` carries rsync's `(reg: X, dir: Y, link: Z, special: W)` breakdown (directories come from the scanner's captured directory list for `-a`/`-t`/`-p`, or from a lightweight traversed-directory counter on a plain `-r` run so the `dir:` category is present there too), `Number of regular files transferred` excludes symlinks/specials and up-to-date files, `Total file size` includes symlink target lengths, and `Total transferred file size` counts only transferred files. **Protocol 2.28.0 extends `STATUS_STATS`** with receiver-observed `literal_bytes` and the four `created_*` counters: `Number of created files` now carries rsync's `(reg/dir/link/special)` breakdown (the receiver reports which destination entries it newly created, including implicitly-created parent directories below the transfer root) and `Literal data` is exact for a delta transfer (the receiver counts the literal fragments it stored, not the whole source size) — all differential-tested in the sequential and `--threads` paths against rsync 3.4.1 for fresh-create, update and delta shapes. **Remaining divergences:** rsync's per-type breakdown on `Number of deleted files` is not reproduced; and `Total bytes sent`/`received` are FastSync wire bytes framed differently from rsync's, so they are not numerically comparable |
 | `-h`, `--human-readable` | Human-readable numbers | ✅ Parity | Formats transfer byte and rate counts using rsync's **decimal** (base-1000) units, matching rsync `-h` (e.g. `1.23M`), not binary units. **A lone `-h` with no transfer arguments prints help instead** (protocol 2.26.0), matching the rsync idiom; `-h` alongside a transfer remains human-readable |
 | `-i`, `--itemize-changes` | Per-file change summary | ✅ Parity | Prints rsync-style `>f+++++++++` lines to stdout only for files actually sent (also under `-j`/`--threads`); unchanged files print nothing, matching single-`-i` behavior |
 | `--progress` | Show progress | ⚠️ Caveat | Protocol 2.25.0 prints rsync-style per-file progress blocks (percent, transferred/total bytes, rate, elapsed, `(xfr#N, to-chk=M/T)`) fed by the receiver's `STATUS_STATS`, in both the sequential and `--threads` send paths. FastSync also prints rsync's leading `./` transfer-root line and, when progress is requested (`--progress`/`-P`/`--info=progress`) and not `--quiet`, runs a **paths-only metadata pre-scan** (no file reads, no hashing) that supplies rsync's file-list total `T` for the `to-chk` denominator and the directory names; `--delete-during`/`--delete-delay` reuse their existing keep-set pre-scan instead of walking twice, and non-progress runs are untouched. Per-directory name lines are emitted (trailing `/`), and symlink (` -> target`) and special entries are named too, so a **fresh multi-directory tree's name set and `to-chk` denominator match rsync 3.4.1** (differential test, sequential and `--threads`) and a **single-file transfer's name lines and deterministic frames remain byte-identical** to rsync. **Remaining divergences:** rsync emits entries in sorted depth-first order while FastSync streams them in the scanner's readdir/BFS order, so the interleaving and the `to-chk` numerator differ (the denominator matches); the leading `./` root line is emitted unconditionally rather than keyed off rsync's root-attribute-change decision, and an ancestor directory line is emitted whenever a child transfers (rsync suppresses it when the directory itself is unchanged); on a re-run, entries without a quick-check (symlinks, empty directories) are still named where rsync stays silent; and the rate/ETA are wall-clock dependent |

src/client/client_cli.c

@@ -504,9 +504,8 @@ static bool split_flag_level(const char* token, char* name, size_t name_size, in
  * of rsync's `symsafe`, `hlink`, and `own`. */
 static bool is_accepted_debug_category(const char* name) {
   static const char* const categories[] = {
-      "acl",   "backup", "bind",   "chdir", "cmd",   "connect", "del",  "deltasum",
+      "acl",  "backup", "bind",  "chdir", "cmd",  "connect", "dup",   "exit", "fuzzy",
-      "dup",   "exit",   "filter", "flist", "fuzzy", "genr",    "hash", "hl",
+      "genr", "hl",     "hlink", "iconv", "nstr", "own",     "owner", "time",
-      "hlink", "iconv",  "nstr",   "own",   "owner", "recv",    "send", "time",
   };
   for (size_t i = 0; i < sizeof(categories) / sizeof(categories[0]); i++) {
     if (strcmp(name, categories[i]) == 0)
@@ -518,7 +517,6 @@ static bool is_accepted_debug_category(const char* name) {
 static bool is_accepted_info_category(const char* name) {
   static const char* const categories[] = {
       "backup",
-      "mount",
       "syms",
       "symsafe",
   };
@@ -571,6 +569,18 @@ static int parse_debug_flags(const char* value, Config* config) {
       flag = LOG_DEBUG_PACK;
     } else if (strcmp(name, "util") == 0) {
       flag = LOG_DEBUG_UTIL;
+    } else if (strcmp(name, "flist") == 0) {
+      flag = LOG_DEBUG_FLIST;
+    } else if (strcmp(name, "del") == 0) {
+      flag = LOG_DEBUG_DEL;
+    } else if (strcmp(name, "hash") == 0 || strcmp(name, "deltasum") == 0) {
+      flag = LOG_DEBUG_HASH;
+    } else if (strcmp(name, "recv") == 0) {
+      flag = LOG_DEBUG_RECV;
+    } else if (strcmp(name, "filter") == 0) {
+      flag = LOG_DEBUG_FILTER;
+    } else if (strcmp(name, "send") == 0) {
+      flag = LOG_DEBUG_SEND;
     } else if (is_accepted_debug_category(name)) {
       continue;
     } else {
@@ -645,9 +655,12 @@ static int parse_info_flags(const char* value, Config* config) {
       flag = LOG_INFO_MISC;
     else if (strcmp(name, "skip") == 0)
       flag = LOG_INFO_SKIP;
-    else if (strcmp(name, "stats") == 0)
+    else if (strcmp(name, "stats") == 0) {
       flag = LOG_INFO_STATS;
-    else if (strcmp(name, "del") == 0)
+      /* `--info=stats` requests the same transfer-statistics block as
+         `--stats`; `--info=stats0` turns it back off. */
+      config->stats = level > 0;
+    } else if (strcmp(name, "del") == 0)
       flag = LOG_INFO_DEL;
     else if (strcmp(name, "remove") == 0)
       flag = LOG_INFO_REMOVE;
@@ -655,6 +668,8 @@ static int parse_info_flags(const char* value, Config* config) {
       flag = LOG_INFO_FLIST;
     else if (strcmp(name, "nonreg") == 0)
       flag = LOG_INFO_NONREG;
+    else if (strcmp(name, "mount") == 0)
+      flag = LOG_INFO_MOUNT;
     else if (strcmp(name, "progress") == 0)
       flag = LOG_INFO_PROGRESS;
     else if (is_accepted_info_category(name))
@@ -1213,6 +1228,12 @@ static int apply_table_option(Config* config, const OptionEntry* entry, const ch
   void* field = (char*)config + entry->offset;
   switch (entry->kind) {
   case OPT_FLAG:
+    /* -x/--one-file-system is repeatable in rsync: `-xx` increments the level so
+       the scanner drops mount-point directories instead of recreating them
+       empty.  Everything else is a plain boolean. */
+    if (entry->offset == offsetof(Config, one_file_system))
+      (*(int*)field)++;
+    else
       *(bool*)field = true;
     return 0;
   case OPT_NOOP:
@@ -2574,7 +2595,11 @@ static bool cli_handle_outbuf_option(CliParseCtx* ctx) {
  * load --files-from once every argument has been seen.  Returns 0 on success,
  * -1 on error. */
 static int cli_finalize_config(Config* config, bool verbose, bool no_delta, bool no_incremental) {
-  set_log_level(config->quiet ? LOG_LEVEL_ERROR : (verbose ? LOG_LEVEL_DEBUG : LOG_LEVEL_WARNING));
+  /* An explicit --debug=FLAGS enables the debug log level by itself (rsync
+     behaviour); -v enables every other INFO-level message. */
+  bool debug_enabled = verbose || config->debug_level != 0;
+  set_log_level(config->quiet ? LOG_LEVEL_ERROR
+                              : (debug_enabled ? LOG_LEVEL_DEBUG : LOG_LEVEL_WARNING));
   /* rsync's plain --delete defaults to delete-during (--del): each directory's
      extras are removed as that directory is processed, so space is freed
      progressively and a tight destination never has to hold the whole old+new
@@ -2764,10 +2789,12 @@ static int cli_finalize_config(Config* config, bool verbose, bool no_delta, bool
   }
   /* --info=del on a real --delete run asks the receiver to report the paths it
      actually removed; the report rides the STATUS_STATS path list, so the wire
-     stats frame must be negotiated too. */
+     stats frame must be negotiated too.  --debug=del needs the same paths, so
-  config->report_deletes = config->use_delete && !config->dry_run &&
+     it opts into the existing report (no new wire field). */
+  config->report_deletes =
+      config->use_delete && !config->dry_run &&
       ((config->info_level & LOG_INFO_DEL) != 0 || config->itemize_changes ||
-                            config->out_format != NULL);
+       config->out_format != NULL || (config->debug_level & LOG_DEBUG_DEL) != 0);
   config->report_stats = config->stats || config->show_progress ||
                          (config->info_level & LOG_INFO_PROGRESS) || format_needs_wire ||
                          config->report_deletes || (config->dry_run && config->use_delete);

src/client/client_send.c

@@ -129,6 +129,21 @@ static void stats_type_breakdown(const TransferStats* stats, char* out, size_t o
                  out_size);
 }
 
+/* rsync's `Number of files` counts every directory.  A recursive scan that
+   preserves a directory attribute captures them in `dir_entries`; a `-r` scan
+   (no -t/-p) captures nothing, so fall back to the scanner's shared counter of
+   traversed directories that are not already represented by an inline
+   directory entry.  The -d generator counts its explicit directory entries
+   inline and does not traverse, so it is excluded here. */
+static unsigned long long dir_count_for_stats(const Config* config, const ArrayList* dir_entries,
+                                              atomic_ullong* counter) {
+  if (config == NULL || config->dirs || config->list_only)
+    return 0;
+  if (dir_metadata_should_capture(config))
+    return dir_entries != NULL ? (unsigned long long)dir_entries->size : 0;
+  return counter != NULL ? (unsigned long long)atomic_load(counter) : 0;
+}
+
 /* Print the rsync `--stats` block on stdout.  The source-side flist and
    transferred counters come from `stats` (filled while scanning/sending), the
    receiver-only counters from the STATUS_STATS frame, and the wire byte totals
@@ -387,6 +402,15 @@ static bool info_flag_enabled(const Config* config, LogInfoFlag flag) {
 static void print_delete_reports(const Config* config, const ArrayList* paths) {
   if (!config || !paths || config->quiet)
     return;
+  /* --debug=del is independent of the --info=del/itemize/out-format display:
+     emit the debug trace even when no deletion line would be printed. */
+  if (log_debug_enabled(LOG_DEBUG_DEL)) {
+    for (int i = 0; i < paths->size; i++) {
+      const char* raw = (const char*)paths->items[i];
+      const char* path = delete_display_path(config, raw);
+      log_debug_message(LOG_DEBUG_DEL, "del: %s", path ? path : raw);
+    }
+  }
   if (!(config->itemize_changes || config->out_format != NULL ||
         info_flag_enabled(config, LOG_INFO_DEL)))
     return;
@@ -665,6 +689,7 @@ static bool prepare_scanner(const Config* config, int num_threads, PreparedScann
   options->ignore_io_errors = config->ignore_errors;
   options->ignore_missing_args = config->ignore_missing_args || config->delete_missing_args;
   options->note_nonreg = (config->info_level & LOG_INFO_NONREG) != 0 && !config->quiet;
+  options->note_mount = (config->info_level & LOG_INFO_MOUNT) != 0 && !config->quiet;
   options->send_directory = config->send_directory;
   options->eight_bit_output = config->eight_bit_output;
   options->excluded_paths = NULL;
@@ -672,6 +697,9 @@ static bool prepare_scanner(const Config* config, int num_threads, PreparedScann
   options->size_skipped_paths = NULL;
   options->synced_dirs = NULL;
   options->hardlinks = NULL;
+  /* Set by the real send paths; NULL for the metadata-only scans (progress
+     pre-count, batch) that must not perturb the sender's --stats counter. */
+  options->dir_count = NULL;
   /* P7 Wave D: capture source directory metadata when a directory attribute is
      requested (-p for modes, -t for times unless -O omits them).  Whether they
      are APPLIED is decided receiver-side. */
@@ -730,6 +758,8 @@ static bool progress_precount_scan(const Config* config, ProgressPrecount* out)
   ScannerOptions local = prepared.options;
   local.list_dirs = true;
   local.note_nonreg = false;
+  local.note_mount = false;
+  local.dir_count = NULL;
   local.use_metadata = false;
   local.preserve_xattrs = false;
   local.preserve_acls = false;
@@ -1336,6 +1366,7 @@ static bool finalize_transfer(Client* client, const Config* config, ArrayList* r
     return false;
   if (status == STATUS_STATS) {
     ReceiverStats scratch;
+    log_debug_message(LOG_DEBUG_RECV, "recv: receiver stats");
     /* A real --info=del run carries the actually-removed paths in the stats
        frame's path list; collect and print them in rsync's format. */
     ArrayList* deleted = config->report_deletes ? array_list_create(free) : NULL;
@@ -1885,6 +1916,8 @@ static int incremental_check(Client* client, File* file, const Config* config,
     if (!file_checksum(file, (ChecksumAlgo)config->checksum_algo, config->checksum_seed, digest,
                        sizeof(digest), &digest_len))
       return -1;
+    log_debug_message(LOG_DEBUG_HASH, "hash: %s (algo %d)", file_wire_path(file),
+                      config->checksum_algo);
     uint8_t wire_len = (uint8_t)digest_len;
     if (!send_n_data(client->file_descriptor, &wire_len, sizeof(wire_len)) ||
         !send_n_data(client->file_descriptor, digest, wire_len))
@@ -1919,6 +1952,7 @@ static int incremental_check(Client* client, File* file, const Config* config,
     log_server_rejection("Server reported error for file");
     return -1;
   }
+  log_debug_message(LOG_DEBUG_RECV, "recv: check reply for %s", file_wire_path(file));
   if (s == STATUS_OK)
     return 1;
   if (s == STATUS_DELTA_SIGNATURE) {
@@ -1933,6 +1967,8 @@ static int incremental_check(Client* client, File* file, const Config* config,
       send_status(client->file_descriptor, STATUS_ERROR);
       return -1;
     }
+    log_debug_message(LOG_DEBUG_RECV, "recv: delta signature for %s (%d blocks)",
+                      file_wire_path(file), sig->block_count);
     *out_sig = sig;
     return 2;
   }
@@ -1973,6 +2009,7 @@ static int incremental_check(Client* client, File* file, const Config* config,
 static int send_delta(Client* client, File* file, DeltaSignature* sig, Config* config) {
   Delta* delta = delta_compute_seeded(file->data->data, file->data->size, sig,
                                       config->delta_block_size, (uint32_t)config->checksum_seed);
+  log_debug_message(LOG_DEBUG_HASH, "deltasum: %s", file_wire_path(file));
   /* The receiver is blocked after sending the signature.  Every local
      fallback therefore needs the explicit NEXT response before full data. */
   if (!delta)
@@ -2446,6 +2483,7 @@ static int send_single_file(Client* client, File* file, Config* config, bool use
                             bool use_sendfile) {
   int compression_level = config->use_compression ? config->compression_level : 0;
   log_info_message(LOG_INFO_COPY, "Transferring %s", file->path);
+  log_debug_message(LOG_DEBUG_SEND, "send: %s", file_wire_path(file));
 
   if (!use_incremental) {
     if (use_sendfile) {
@@ -2886,8 +2924,8 @@ static int send_chunks_multithreaded(void* pipeline_context) {
                 "server reported a deletion failure (--delete); see the server log for the reason");
   if (ok)
     remove_transferred_sources(context->config, context->remove_source_files);
-  if (context->dir_entries)
+  context->stats.flist_dir +=
-    context->stats.flist_dir += (unsigned long long)context->dir_entries->size;
+      dir_count_for_stats(context->config, context->dir_entries, &context->dir_count);
   report_transfer_stats(context->config, &context->stats, start, &recv_stats);
   log_info_message(LOG_INFO_STATS, "Transfer summary: %llu files, %.1f MB",
                    context->stats.transferred_regular,
@@ -2924,6 +2962,7 @@ static int scan_directory_multithreaded(void* pipeline_context) {
      parallel workers append under the context's dedicated mutex. */
   prepared.options.dir_entries = context->dir_entries;
   prepared.options.dir_entries_mutex = &context->dir_entries_mutex;
+  prepared.options.dir_count = context->config->stats ? &context->dir_count : NULL;
   if (!append_implied_dir_times(context->config, context->dir_entries)) {
     pipeline_cancel(context);
     protocol_session_unbind();
@@ -3192,6 +3231,9 @@ int send_files(Config* config) {
   /* P7 Wave D: captured source directory times, transmitted in trailing
      STATUS_DIR_TIMES frame(s) (only when metadata rides the wire). */
   ArrayList* dir_entries = NULL;
+  /* --stats directory accounting for the no-metadata (-r) case. */
+  atomic_ullong dir_count;
+  atomic_init(&dir_count, 0);
   /* Protected excluded prefixes (delete-excluded default protection). */
   ArrayList* excluded = NULL;
   /* Size-pruned prefixes (always protected) and synchronized directories. */
@@ -3373,6 +3415,7 @@ int send_files(Config* config) {
      the directory-time list (otherwise every directory would be captured
      twice). */
   prepared.options.dir_entries = dir_entries;
+  prepared.options.dir_count = config->stats ? &dir_count : NULL;
   scanner = directory_scanner_create_with_options(config->send_directory, &prepared.options);
   if (!scanner)
     goto send_fail;
@@ -3526,8 +3569,7 @@ int send_files(Config* config) {
      from the scanner's captured directory list (present whenever a directory
      attribute is preserved, e.g. -a/-t/-p).  The -d generator counts its
      explicit directory entries inline instead. */
-  if (dir_entries)
+  transfer_stats.flist_dir += dir_count_for_stats(config, dir_entries, &dir_count);
-    transfer_stats.flist_dir += (unsigned long long)dir_entries->size;
   report_transfer_stats(config, &transfer_stats, start, &recv_stats);
   log_info_message(LOG_INFO_STATS, "Transfer summary: %llu files, %.1f MB",
                    transfer_stats.transferred_regular,

src/client/scanner.c

@@ -219,8 +219,8 @@ typedef struct {
 /* --one-file-system (-x) decision. Only directories can carry a different
  * device than their parent (mount points), so this is checked when a child
  * directory is about to be descended into. */
-bool scanner_same_filesystem(bool one_file_system, dev_t root_device, dev_t entry_device) {
+bool scanner_same_filesystem(int one_file_system, dev_t root_device, dev_t entry_device) {
-  return !one_file_system || entry_device == root_device;
+  return one_file_system <= 0 || entry_device == root_device;
 }
 
 /* Build a payload-less directory File carrying the captured metadata (when
@@ -456,6 +456,40 @@ static void scanner_note_nonreg(const ScannerOptions* options, const char* fs_pa
   fflush(stdout);
 }
 
+/* rsync 3.4.1's `--info=mount` line, emitted when `-xx` drops a mount-point
+ * directory: `[sender] skipping mount-point dir NAME` (the client is the
+ * sender).  Plain `-x` keeps the empty directory and prints nothing, matching
+ * rsync. */
+static void scanner_note_mount(const ScannerOptions* options, const char* fs_path) {
+  if (!options || !options->note_mount || !fs_path)
+    return;
+  const char* rel = utils_strip_transfer_root(fs_path, options->send_directory);
+  char* escaped = output_escape(rel, options->eight_bit_output);
+  printf("[sender] skipping mount-point dir %s\n", escaped ? escaped : rel);
+  free(escaped);
+  fflush(stdout);
+}
+
+/* --debug=filter: a selection/filter decision dropped an entry. */
+static void scanner_note_filter(const ScannerOptions* options, const char* name) {
+  if (!options || !log_debug_enabled(LOG_DEBUG_FILTER) || !name)
+    return;
+  log_debug_message(LOG_DEBUG_FILTER, "filter: excluded %s", name);
+}
+
+/* Account for a directory that will not be represented by an inline directory
+ * entry.  Paired with scanner_dir_count_uncount for empty directories that are
+ * emitted inline, so every traversed directory is counted exactly once. */
+static void scanner_dir_count_count(const ScannerOptions* options) {
+  if (options && options->dir_count)
+    atomic_fetch_add(options->dir_count, 1);
+}
+
+static void scanner_dir_count_uncount(const ScannerOptions* options) {
+  if (options && options->dir_count)
+    atomic_fetch_sub(options->dir_count, 1);
+}
+
 /* A user-selection exclusion (--filter/-C/per-dir or --exclude/--include). */
 static void scanner_record_excluded(DirectoryScanner* scanner, const char* fs_path) {
   scanner_record_protected(scanner, fs_path, scanner->options.excluded_paths);
@@ -1096,6 +1130,9 @@ static bool scanner_emit_empty_dir(DirectoryScanner* scanner, ArrayList* chunk_d
     file_destroy(dir);
     return false;
   }
+  /* The directory was counted when it was opened; this inline entry represents
+     it, so drop the counter to avoid counting it twice in --stats. */
+  scanner_dir_count_uncount(&scanner->options);
   return true;
 }
 
@@ -1185,6 +1222,8 @@ static int open_next_directory(DirectoryScanner* scanner) {
       scanner->failed = true;
       return -1;
     }
+    scanner_dir_count_count(&scanner->options);
+    log_debug_message(LOG_DEBUG_FLIST, "flist: scanning %s", scanner->current_path);
     if (scanner->options.capture_dir_times &&
         !scanner_capture_dir_time(
             scanner->options.dir_entries, scanner->options.dir_entries_mutex, scanner->root_path,
@@ -1692,6 +1731,7 @@ Chunk* directory_scanner_next(DirectoryScanner* scanner) {
       break;
     }
     if (!passes_selection) {
+      scanner_note_filter(&scanner->options, name);
       free(rel_copy);
       continue;
     }
@@ -1700,6 +1740,13 @@ Chunk* directory_scanner_next(DirectoryScanner* scanner) {
       free(rel_copy);
       if (!scanner_same_filesystem(scanner->options.one_file_system, scanner->root_dev,
                                    stats.st_dev)) {
+        if (scanner->options.one_file_system > 1) {
+          /* rsync's -xx drops the mount-point directory entirely (the plain -x
+             path below keeps it as an empty directory) and prints the
+             --info=mount line when that category is enabled. */
+          scanner_note_mount(&scanner->options, cur_path);
+          continue;
+        }
         /* rsync's -x/--one-file-system emits the mount-point directory entry
            itself (so the destination gets an empty directory) but does NOT
            descend into it.  Build a payload-less directory File and hand it to
@@ -2113,6 +2160,7 @@ static void scan_root_entry(const ScannerOptions* options, const FilterNode* roo
       free(prefixed);
     }
     if (!passes) {
+      scanner_note_filter(options, entry->d_name);
       free(rel);
       free(cur_path);
       return;
@@ -2120,6 +2168,14 @@ static void scan_root_entry(const ScannerOptions* options, const FilterNode* roo
   }
   if (is_dir) {
     if (!scanner_same_filesystem(options->one_file_system, root_dev, st.st_dev)) {
+      if (options->one_file_system > 1) {
+        /* -xx: drop the mount-point directory entirely (rsync) and print the
+           --info=mount line when enabled. */
+        scanner_note_mount(options, cur_path);
+        free(rel);
+        free(cur_path);
+        return;
+      }
       /* -x/--one-file-system: emit the mount-point directory entry (empty) but
          do not descend into it (see the sequential scanner for the same rule). */
       File* mount = file_create(cur_path);
@@ -2257,6 +2313,7 @@ static bool scan_root_directory(ParallelScanner* ps, const char* root_directory,
     ps->failed = true;
     return false;
   }
+  log_debug_message(LOG_DEBUG_FLIST, "flist: scanning %s", root_directory);
   const struct dirent* entry;
   while ((entry = readdir(dir)) != NULL) {
     if (strcmp(entry->d_name, ".") == 0 || strcmp(entry->d_name, "..") == 0)
@@ -2421,6 +2478,10 @@ ParallelScanner* parallel_scanner_create_with_options(const char* root_directory
     parallel_scanner_destroy(ps);
     return NULL;
   }
+  /* The root itself is a traversed directory (rsync counts it in
+     `Number of files`); the worker DirectoryScanners account for every
+     subdirectory below it. */
+  scanner_dir_count_count(options);
   /* P7 Wave D: the parallel scanner never runs a DirectoryScanner over the
      transfer root itself (it hands the root's immediate subdirectories to
      workers), so capture the root's directory time here. */

src/client/scanner.h

@@ -51,7 +51,7 @@ typedef struct {
   bool copy_dirlinks;
   bool munge_links;
   bool checksum;
-  bool one_file_system;
+  int one_file_system;
   /* Phase 4 special/devices: whether device nodes (--devices) and special files
    * (--specials) are preserved via recreation, and whether --copy-devices
    * copies a device's content as an ordinary regular file. */
@@ -130,6 +130,17 @@ typedef struct {
   /* --info=nonreg: print rsync's `skipping non-regular file "NAME"` line for a
    * non-regular entry that is not being preserved.  Client-only. */
   bool note_nonreg;
+  /* --info=mount: print rsync's `[sender] skipping mount-point dir NAME` when
+   * -xx drops a mount-point directory.  Client-only. */
+  bool note_mount;
+  /* --stats directory accounting for a `-r` run (no -t/-p): a shared counter of
+   * traversed directories that are NOT otherwise represented by an inline
+   * directory entry (rsync still counts every directory in `Number of files`).
+   * Incremented when a directory is opened and decremented when an empty
+   * directory is emitted inline (so it is counted exactly once).  Atomic
+   * because the parallel scanner's workers share it; NULL disables the
+   * accounting.  Client-only. */
+  atomic_ullong* dir_count;
   /* Source root and 8-bit-output policy used to render a `--info=nonreg` name
    * relative to the transfer root.  Borrowed read-only. */
   const char* send_directory;
@@ -266,7 +277,7 @@ void directory_scanner_destroy(DirectoryScanner* scanner);
 /* --one-file-system (-x) decision: a directory entry may be descended into
  * only when the option is disabled or the entry lives on the same device as
  * the transfer root. Exposed so tests can exercise the rule directly. */
-bool scanner_same_filesystem(bool one_file_system, dev_t root_device, dev_t entry_device);
+bool scanner_same_filesystem(int one_file_system, dev_t root_device, dev_t entry_device);
 
 /* Relative path of an on-disk path below `root` ("" == the root itself, NULL
  * when `fs_path` is not under `root`). Handles trailing slashes and a root of

src/shared/config.c

@@ -79,7 +79,7 @@ static void config_set_defaults(Config* config) {
   config->cvs_exclude = false;
   config->per_dir_filter = false;
   config->per_dir_filter_count = 0;
-  config->one_file_system = false;
+  config->one_file_system = 0;
   config->no_implied_dirs = false;
   config->dirs = false;
   config->rsh_command = NULL;

src/shared/config.h

@@ -463,7 +463,9 @@ typedef struct Config {
    * /.rsync-filter' (the .rsync-filter files themselves are transferred); a
    * repeated -F adds --filter='- .rsync-filter' so they are excluded too. */
   int per_dir_filter_count;
-  bool one_file_system; /* -x/--one-file-system: do not cross filesystem boundaries */
+  int one_file_system; /* -x/--one-file-system: do not cross filesystem boundaries.
+                          Repeated -x (rsync's -xx) drops the mount-point
+                          directory entirely instead of recreating it empty. */
   /* --no-implied-dirs: client-only.  With -R, do not transfer the source
    * metadata of the parent directories implied by a listed path; an unlisted
    * implied parent is still created (with default attributes) so the listed

src/shared/log.h

@@ -13,7 +13,19 @@ typedef enum {
   LOG_DEBUG_PROTO = 1u << 1,
   LOG_DEBUG_PACK = 1u << 2,
   LOG_DEBUG_UTIL = 1u << 3,
-  LOG_DEBUG_ALL = (1u << 4) - 1,
+  /* rsync --debug categories that now map to a natural FastSync event:
+   * flist (file-list scan progress), del (deletions), hash/deltasum
+   * (whole-file hashing and delta-sum generation), recv (receiver
+   * responses/signatures), filter (selection/exclusion decisions) and send
+   * (files handed to the sender).  Only emitted when the category is
+   * explicitly enabled; a normal run stays silent. */
+  LOG_DEBUG_FLIST = 1u << 4,
+  LOG_DEBUG_DEL = 1u << 5,
+  LOG_DEBUG_HASH = 1u << 6,
+  LOG_DEBUG_RECV = 1u << 7,
+  LOG_DEBUG_FILTER = 1u << 8,
+  LOG_DEBUG_SEND = 1u << 9,
+  LOG_DEBUG_ALL = (1u << 10) - 1,
 } LogDebugFlag;
 
 typedef enum {
@@ -38,9 +50,13 @@ typedef enum {
      the info_level bitset (there is no separate Config field) and is never set
      by --info=all (which selects level 1). */
   LOG_INFO_NAME_UPTODATE = 1u << 10,
+  /* --info=mount: print rsync's `[sender] skipping mount-point dir NAME` when
+   * -xx/--one-file-system drops a mount-point directory (FastSync's client is
+   * the sender). */
+  LOG_INFO_MOUNT = 1u << 11,
   LOG_INFO_ALL = LOG_INFO_COPY | LOG_INFO_MISC | LOG_INFO_SKIP | LOG_INFO_STATS | LOG_INFO_DEL |
                  LOG_INFO_REMOVE | LOG_INFO_NAME | LOG_INFO_FLIST | LOG_INFO_NONREG |
-                 LOG_INFO_PROGRESS,
+                 LOG_INFO_PROGRESS | LOG_INFO_MOUNT,
 } LogInfoFlag;
 
 void log_message(LogLevel log_level, const char* message, ...);

src/shared/multiprocessing.c

@@ -50,6 +50,7 @@ PipelineContextSender* pipeline_context_sender_create(Config* config, Queue* que
   protocol_session_set_max_alloc(&context->allocation_session, config->max_alloc);
   context->dir_entries = NULL;
   context->dir_entries_mutex_init = false;
+  atomic_init(&context->dir_count, 0);
   context->delete_limit = false;
   int init = 0;
   if (config->use_metadata) {

src/shared/multiprocessing.h

@@ -119,6 +119,10 @@ typedef struct {
   ArrayList* dir_entries;
   mtx_t dir_entries_mutex;
   bool dir_entries_mutex_init;
+  /* --stats directory accounting for a `-r` scan (no directory metadata):
+     shared by the parallel scanner workers, read by the sender thread once the
+     scanner is done.  See ScannerOptions.dir_count. */
+  atomic_ullong dir_count;
   /* Set by the sender thread when the receiver reported a --max-delete-capped
      deletion (STATUS_DELETE_LIMIT): the transfer succeeded and the process must
      exit 25 like rsync.  Read by the caller after the sender thread is joined. */

tests/integration/test_output_parity.py

@@ -662,6 +662,46 @@ class TestWireStatsParity:
         assert re.match(r"Number of created files: 1 \(reg: 1\)$", r_created), r_created
         assert f_created == r_created, (r_created, f_created)
 
+    @requires_rsync
+    @pytest.mark.ci
+    @pytest.mark.parametrize("mt", [False, True])
+    def test_stats_r_directory_breakdown_matches_rsync(self, shared_server, mt):
+        """A recursive `-r` scan (no -t/-p) exposes no directory metadata, but
+        rsync still counts every directory in `Number of files`; the sender's
+        lightweight directory counter must reproduce the `dir: N` category."""
+        source = os.path.join(TEST_DATA_DIR, "wire_stdir_src")
+        dest = os.path.join(TEST_DATA_DIR, "wire_stdir_dst")
+        rdst = os.path.join(TEST_DATA_DIR, "wire_stdir_rdst")
+        clean_dir(source)
+        clean_dir(dest)
+        clean_dir(rdst)
+        os.makedirs(os.path.join(source, "sub", "deep"))
+        os.makedirs(os.path.join(source, "empty"))
+        for rel in ("a.txt", os.path.join("sub", "b.txt"), os.path.join("sub", "deep", "c.txt")):
+            with open(os.path.join(source, rel), "wb") as fh:
+                fh.write(b"x\n")
+        os.makedirs(get_dest_received_dir(dest, source), exist_ok=True)
+
+        rsync_result = _rsync(["-r", "--stats", source + "/", rdst + "/"])
+        assert rsync_result.returncode == 0, rsync_result.stderr
+        flags = ["-r", "--stats"] + (["--threads"] if mt else [])
+        result, _ = run_client(source, dest, flags=flags, port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:300]
+
+        def stats_line(text, key):
+            for line in text.splitlines():
+                if line.startswith(key + ":"):
+                    return line
+            return None
+
+        r_files = stats_line(rsync_result.stdout, "Number of files")
+        f_files = stats_line(result.stdout, "Number of files")
+        # 3 regular files, 4 directories (root, sub, sub/deep, empty).
+        assert re.match(r"Number of files: 7 \(reg: 3, dir: 4\)$", r_files), r_files
+        assert f_files == r_files, (r_files, f_files)
+        assert (stats_line(result.stdout, "Number of regular files transferred") ==
+                stats_line(rsync_result.stdout, "Number of regular files transferred"))
+
     @requires_rsync
     @pytest.mark.ci
     @pytest.mark.parametrize("mt", [False, True])

tests/integration/test_parity_debug.py

@@ -0,0 +1,105 @@
+"""`--debug=FLAGS` natural-event categories (no-wire).
+
+FastSync maps the rsync `--debug` categories that correspond to a real event it
+already performs (``flist``, ``del``, ``hash``/``deltasum``, ``recv``,
+``filter`` and ``send``) onto debug output.  A normal run prints none of it.
+"""
+import os
+import sys
+
+import pytest
+
+sys.path.insert(0, os.path.dirname(__file__))
+from common import TEST_DATA_DIR, run_client, clean_dir, get_dest_received_dir, ServerManager
+
+
+def _make_tree(root):
+    clean_dir(root)
+    os.makedirs(os.path.join(root, "sub"))
+    with open(os.path.join(root, "a.txt"), "wb") as fh:
+        fh.write(b"alpha\n")
+    with open(os.path.join(root, "keep.log"), "wb") as fh:
+        fh.write(b"log\n")
+    with open(os.path.join(root, "sub", "b.txt"), "wb") as fh:
+        fh.write(b"beta\n")
+
+
+@pytest.mark.ci
+def test_debug_flist_and_send_emit_output(shared_server):
+    """`--debug=flist,send` produces category-tagged debug output."""
+    source = os.path.join(TEST_DATA_DIR, "dbg_src")
+    dest = os.path.join(TEST_DATA_DIR, "dbg_dst")
+    _make_tree(source)
+    clean_dir(dest)
+    result, _ = run_client(source, dest, flags=["-a", "--debug=flist,send"],
+                           port=shared_server.port)
+    assert result.returncode == 0, (result.stderr or result.stdout)[:300]
+    assert "flist: scanning" in result.stdout, result.stdout
+    assert "send: " in result.stdout, result.stdout
+
+
+@pytest.mark.ci
+def test_debug_filter_emits_excluded_entry(shared_server):
+    source = os.path.join(TEST_DATA_DIR, "dbg_filter_src")
+    dest = os.path.join(TEST_DATA_DIR, "dbg_filter_dst")
+    _make_tree(source)
+    clean_dir(dest)
+    result, _ = run_client(source, dest,
+                           flags=["-a", "--debug=filter", "--exclude=*.log"],
+                           port=shared_server.port)
+    assert result.returncode == 0, (result.stderr or result.stdout)[:300]
+    assert "filter: excluded keep.log" in result.stdout, result.stdout
+
+
+@pytest.mark.ci
+def test_debug_hash_and_recv_emit_on_incremental(shared_server):
+    source = os.path.join(TEST_DATA_DIR, "dbg_hash_src")
+    dest = os.path.join(TEST_DATA_DIR, "dbg_hash_dst")
+    _make_tree(source)
+    clean_dir(dest)
+    result, _ = run_client(source, dest,
+                           flags=["-a", "--incremental", "--checksum",
+                                  "--debug=hash,recv"],
+                           port=shared_server.port)
+    assert result.returncode == 0, (result.stderr or result.stdout)[:300]
+    assert "hash: " in result.stdout, result.stdout
+    assert "recv: " in result.stdout, result.stdout
+
+
+@pytest.mark.ci
+def test_debug_del_emits_deleted_path():
+    """`--debug=del` reports the paths the receiver actually removed.
+
+    A deletion-capable server is required (the shared fixture refuses
+    client-requested deletion)."""
+    source = os.path.join(TEST_DATA_DIR, "dbg_del_src")
+    dest = os.path.join(TEST_DATA_DIR, "dbg_del_dst")
+    _make_tree(source)
+    clean_dir(dest)
+    seeded = get_dest_received_dir(dest, source)
+    os.makedirs(seeded)
+    with open(os.path.join(seeded, "extra.tmp"), "wb") as fh:
+        fh.write(b"stale\n")
+    server = ServerManager()
+    server.start(extra_args=["--allow-super", "--allow-delete"])
+    try:
+        result, _ = run_client(source, dest, flags=["-a", "--delete", "--debug=del"],
+                               port=server.port)
+    finally:
+        server.stop()
+    assert result.returncode == 0, (result.stderr or result.stdout)[:300]
+    assert "del: " in result.stdout and "extra.tmp" in result.stdout, result.stdout
+    assert not os.path.exists(os.path.join(seeded, "extra.tmp"))
+
+
+@pytest.mark.ci
+def test_normal_run_has_no_debug_output(shared_server):
+    source = os.path.join(TEST_DATA_DIR, "dbg_quiet_src")
+    dest = os.path.join(TEST_DATA_DIR, "dbg_quiet_dst")
+    _make_tree(source)
+    clean_dir(dest)
+    result, _ = run_client(source, dest, flags=["-a"], port=shared_server.port)
+    assert result.returncode == 0, (result.stderr or result.stdout)[:300]
+    assert "[DEBUG]" not in result.stdout
+    assert "flist: scanning" not in result.stdout
+    assert "send: " not in result.stdout

tests/integration/test_parity_info_mount_stats.py

@@ -0,0 +1,174 @@
+"""Differential parity for `--info=mount` and `--info=stats` (no-wire).
+
+Both behaviours are compared against real rsync 3.4.1:
+
+* `--info=mount` prints rsync's ``[sender] skipping mount-point dir NAME`` line
+  when ``-xx`` drops a mount-point directory.  Plain ``-x`` keeps the empty
+  directory and stays silent, exactly like rsync.
+* `--info=stats` requests the same transfer-statistics block as `--stats`
+  (rsync spells the full block ``--info=stats2``/``--stats``).
+
+The tests are skipped when rsync is unavailable.
+"""
+import os
+import re
+import shutil
+import subprocess
+import sys
+
+import pytest
+
+sys.path.insert(0, os.path.dirname(__file__))
+from common import TEST_DATA_DIR, run_client, clean_dir, get_dest_received_dir
+
+RSYNC = shutil.which("rsync")
+requires_rsync = pytest.mark.skipif(RSYNC is None, reason="rsync 3.4.1 not installed")
+
+
+def _rsync(args):
+    env = dict(os.environ, LC_ALL="C")
+    return subprocess.run([RSYNC] + args, capture_output=True, text=True, env=env, timeout=120)
+
+
+def _cross_device_mount_tree(source):
+    """Build a source whose ``nested_link`` is a symlink onto a tmpfs directory.
+
+    ``--copy-links`` dereferences it so ``-x`` sees a mount-point directory on a
+    different device.  Returns the probe path to remove, or skips the test when
+    no cross-device filesystem is available.
+    """
+    local = os.stat(".")
+    shm = "/dev/shm"
+    try:
+        shm_stat = os.stat(shm)
+    except OSError:
+        pytest.skip("/dev/shm not available")
+    if shm_stat.st_dev == local.st_dev:
+        pytest.skip("no cross-device filesystem available")
+
+    clean_dir(source)
+    with open(os.path.join(source, "keep.txt"), "wb") as fh:
+        fh.write(b"keep\n")
+    probe = os.path.join(shm, f"fastsync_info_mount_{os.getpid()}")
+    shutil.rmtree(probe, ignore_errors=True)
+    os.makedirs(probe)
+    with open(os.path.join(probe, "inside.txt"), "wb") as fh:
+        fh.write(b"cross\n")
+    try:
+        os.symlink(probe, os.path.join(source, "nested_link"))
+    except OSError:
+        shutil.rmtree(probe, ignore_errors=True)
+        pytest.skip("cannot create symlink")
+    return probe
+
+
+@requires_rsync
+@pytest.mark.ci
+def test_info_mount_xx_matches_rsync(shared_server):
+    """`-xx --info=mount` drops the mount-point dir and prints rsync's line."""
+    source = os.path.join(TEST_DATA_DIR, "info_mount_src")
+    dest = os.path.join(TEST_DATA_DIR, "info_mount_dst")
+    rdst = os.path.join(TEST_DATA_DIR, "info_mount_rdst")
+    probe = _cross_device_mount_tree(source)
+    clean_dir(dest)
+    clean_dir(rdst)
+    flags = ["-a", "--copy-links", "-xx", "--info=mount"]
+    try:
+        rsync_result = _rsync(flags + [source + "/", rdst + "/"])
+        assert rsync_result.returncode == 0, rsync_result.stderr
+        result, _ = run_client(source, dest, flags=flags, port=shared_server.port)
+        assert result.returncode == 0, (result.stderr or result.stdout)[:300]
+
+        expected = "[sender] skipping mount-point dir nested_link"
+        assert expected in rsync_result.stdout, rsync_result.stdout
+        assert expected in result.stdout, (result.stdout, result.stderr)
+
+        received = get_dest_received_dir(dest, source)
+        assert os.path.exists(os.path.join(received, "keep.txt"))
+        # -xx omits the mount-point directory entirely.
+        assert not os.path.exists(os.path.join(received, "nested_link"))
+        assert not os.path.exists(os.path.join(rdst, "nested_link"))
+    finally:
+        shutil.rmtree(probe, ignore_errors=True)
+
+
+@requires_rsync
+@pytest.mark.ci
+def test_info_mount_single_x_is_silent(shared_server):
+    """Plain `-x` keeps the empty mount-point directory and prints no line."""
+    source = os.path.join(TEST_DATA_DIR, "info_mount1_src")
+    dest = os.path.join(TEST_DATA_DIR, "info_mount1_dst")
+    rdst = os.path.join(TEST_DATA_DIR, "info_mount1_rdst")
+    probe = _cross_device_mount_tree(source)
+    clean_dir(dest)
+    clean_dir(rdst)
+    flags = ["-a", "--copy-links", "-x", "--info=mount"]
+    try:
+        rsync_result = _rsync(flags + [source + "/", rdst + "/"])
+        assert rsync_result.returncode == 0, rsync_result.stderr
+        result, _ = run_client(source, dest, flags=flags, port=shared_server.port)
+        assert result.returncode == 0, (result.stderr or result.stdout)[:300]
+
+        assert "skipping mount-point dir" not in rsync_result.stdout
+        assert "skipping mount-point dir" not in result.stdout
+
+        received = get_dest_received_dir(dest, source)
+        assert os.path.isdir(os.path.join(received, "nested_link"))
+        assert not os.path.exists(os.path.join(received, "nested_link", "inside.txt"))
+        assert os.path.isdir(os.path.join(rdst, "nested_link"))
+        assert not os.path.exists(os.path.join(rdst, "nested_link", "inside.txt"))
+    finally:
+        shutil.rmtree(probe, ignore_errors=True)
+
+
+def _make_stats_tree(root):
+    clean_dir(root)
+    os.makedirs(os.path.join(root, "sub"))
+    with open(os.path.join(root, "a.txt"), "wb") as fh:
+        fh.write(b"alpha\n")
+    with open(os.path.join(root, "sub", "b.txt"), "wb") as fh:
+        fh.write(b"beta\n")
+
+
+def _pick_stats(text):
+    keys = ("Number of files", "Number of regular files transferred", "Total file size",
+            "Total transferred file size", "Literal data", "Matched data")
+    out = {}
+    for line in text.splitlines():
+        for key in keys:
+            if line.startswith(key + ":"):
+                out[key] = line
+    return out
+
+
+@requires_rsync
+@pytest.mark.ci
+def test_info_stats_emits_full_stats_block(shared_server):
+    """`--info=stats` is the same full block as `--stats` and matches rsync."""
+    source = os.path.join(TEST_DATA_DIR, "info_stats_src")
+    dest = os.path.join(TEST_DATA_DIR, "info_stats_dst")
+    rdst = os.path.join(TEST_DATA_DIR, "info_stats_rdst")
+    dest2 = os.path.join(TEST_DATA_DIR, "info_stats_dst2")
+    _make_stats_tree(source)
+    for path in (dest, rdst, dest2):
+        clean_dir(path)
+        os.makedirs(get_dest_received_dir(path, source), exist_ok=True)
+
+    rsync_result = _rsync(["-a", "--stats", source + "/", rdst + "/"])
+    assert rsync_result.returncode == 0, rsync_result.stderr
+
+    info_result, _ = run_client(source, dest, flags=["-a", "--info=stats"],
+                                port=shared_server.port)
+    assert info_result.returncode == 0, (info_result.stderr or info_result.stdout)[:300]
+    stats_result, _ = run_client(source, dest2, flags=["-a", "--stats"],
+                                 port=shared_server.port)
+    assert stats_result.returncode == 0, (stats_result.stderr or stats_result.stdout)[:300]
+
+    # --info=stats must print the same block as --stats...
+    assert _pick_stats(info_result.stdout) == _pick_stats(stats_result.stdout), (
+        f"info={info_result.stdout} stats={stats_result.stdout}")
+    # ...and the protocol-independent counters must match real rsync.
+    assert _pick_stats(info_result.stdout) == _pick_stats(rsync_result.stdout), (
+        f"rsync={_pick_stats(rsync_result.stdout)} fastsync={_pick_stats(info_result.stdout)}")
+    assert re.search(r"^Number of files: \d+ \(reg: 2, dir: 2\)$", info_result.stdout,
+                     re.MULTILINE), info_result.stdout

tests/test_client_cli.c

@@ -762,8 +762,9 @@ static void test_parse_args_debug_flags() {
   int positional_count = 0;
 
   EXPECT_EQ_INT(parse_args(cfg, 4, argv, positional_args, &positional_count), 0);
-  EXPECT_EQ_INT(cfg->debug_level, LOG_DEBUG_ALL);
+  EXPECT_EQ_INT(cfg->debug_level, LOG_DEBUG_IO | LOG_DEBUG_PROTO | LOG_DEBUG_PACK | LOG_DEBUG_UTIL);
-  EXPECT_EQ_INT(get_log_debug_flags(), LOG_DEBUG_ALL);
+  EXPECT_EQ_INT(get_log_debug_flags(),
+                LOG_DEBUG_IO | LOG_DEBUG_PROTO | LOG_DEBUG_PACK | LOG_DEBUG_UTIL);
   config_delete(cfg);
 }
 
@@ -1421,10 +1422,9 @@ static void test_parse_args_info_name_and_help() {
   config_delete(cfg);
 }
 
-/* rsync 3.4.1's full --info/--debug vocabulary parses.  The info categories
+/* rsync 3.4.1's full --info/--debug vocabulary parses.  The categories with a
- * with a FastSync event set their flag; the remaining rsync-only categories
+ * FastSync event set their flag; the remaining rsync-only categories
- * (backup/mount/symsafe/syms) parse but stay silent.  Every --debug category
+ * (backup/symsafe/syms, acl/bind/chdir/...) parse but stay silent. */
- * listed here is FastSync-silent, so debug_level stays 0. */
 static void test_parse_args_rsync_flag_vocabulary_accepted() {
   Config* cfg = config_create();
   char* argv[] = {"fastsync", "--info=backup,del,flist,mount,nonreg,progress,remove,symsafe,syms",
@@ -1436,9 +1436,10 @@ static void test_parse_args_rsync_flag_vocabulary_accepted() {
   int positional_count = 0;
 
   EXPECT_EQ_INT(parse_args(cfg, 4, argv, positional_args, &positional_count), 0);
-  EXPECT_EQ_INT(cfg->info_level, LOG_INFO_DEL | LOG_INFO_FLIST | LOG_INFO_NONREG |
+  EXPECT_EQ_INT(cfg->info_level, LOG_INFO_DEL | LOG_INFO_FLIST | LOG_INFO_MOUNT | LOG_INFO_NONREG |
                                      LOG_INFO_PROGRESS | LOG_INFO_REMOVE);
-  EXPECT_EQ_INT(cfg->debug_level, 0);
+  EXPECT_EQ_INT(cfg->debug_level, LOG_DEBUG_DEL | LOG_DEBUG_FLIST | LOG_DEBUG_HASH |
+                                      LOG_DEBUG_RECV | LOG_DEBUG_FILTER | LOG_DEBUG_SEND);
   config_delete(cfg);
 }