utils_fd_peer_is_local now returns true only when getpeername SUCCEEDS and the
peer address classifies as loopback. A non-socket descriptor (pipe/socketpair)
or any getpeername error is NOT local, so the daemon auth gate fails closed
instead of treating an untestable --stdio pipe as trusted (daemon auth modules
are --daemon-only and the stdio path never loads a daemon config).
server_module_gate now requires --allow-unauthenticated for the loopback
plaintext auth path: a plaintext loopback connection without the operator
opt-in is refused at the config gate BEFORE server_auth_handshake, so no SCRAM
challenge is sent. Remote peers still require verified TLS regardless of the
flag; the handler keeps its defense-in-depth checks.
Docs state the exact policy (verified TLS with matching --client-cn, or
operator-opted-in loopback plaintext), drop the SSH/stdio auth-transport claim
(they are daemon-only), and add the loopback trust-boundary relay caveat and
the CN-only (no SAN) residual. Adds a unit-test negative for pipe/socketpair
and an integration test where a relay observes no challenge when the flag is
absent.
Daemon modules that declare 'auth users' no longer accept credentials over a
remote plaintext connection: server_module_gate refuses at the config gate,
before any SCRAM challenge is sent, unless the connection is verified TLS with
a client certificate matching --client-cn, or a local/SSH transport (loopback
TCP peer or the --stdio pipe). --allow-unauthenticated does not relax this.
The TLS client-CN comparison now uses credentials_secure_equal (S2). Clients
sending --password-file to a non-loopback daemon must use --tls; validate_config
rejects the plaintext case before any network I/O.
Adds utils_sockaddr_is_loopback / utils_fd_peer_is_local / utils_host_is_loopback
helpers with unit tests, a client validation unit test, and integration tests
for the client-side plaintext rejection and the wrong-CN gate refusal.
- burn the store-wide dummy_key in credentials_free()
- burn the local mac on hmac_sha256 failure in credentials_get_verifier()
- always run the O(store) constant-time scan, even for off-list users, to
close the pre-existing off-list timing channel; select the real verifier
only when on_list && match
- clarify the server_auth_handshake STATUS_AUTH_FAILED comment (failure
before success vs. a dropped broken connection while writing the signature)
- document accepted anti-enumeration residuals (restart-gated dummy salt;
pre-auth-observable iteration count)
- tests: pass CREDENTIAL_KEY_LEN to unhex for the 32-byte KAT proof/sig
(sizeof(expect) is 348, over-reading the 65-byte hex literal under ASan)
- credentials: close the username-enumeration oracle with a store-wide
dummy_key and a deterministic per-username dummy salt; make the store's
iteration count uniform (reject intra-file and layered disagreements) and
answer a miss with the store-wide count; run the constant-time key compare
even when found=false and fold the decision with bitwise AND
- credentials_compute_keys: enforce [CREDENTIAL_MIN_ITERS, CREDENTIAL_MAX_ITERS]
- tests: recompute the whole KAT independently at CREDENTIAL_DEFAULT_ITERS
(600000) and pin the golden store line; add non-uniform-store rejection,
bound and deterministic-dummy-salt assertions
- server: send exactly one generic STATUS_AUTH_FAILED on every failure path
(including credentials_get_verifier failure); route all handshake exits
through one burn path
- credentials/server: burn the base64 decoders' scratch on error, the
hash_store_line base64/line buffers on failure, and all handshake key/proof
material
- fuzz: guard the auth-offset scan against size_t underflow and use a found flag
- docs: drop stale digest wording, use CREDENTIAL_MIN_ITERS as the --iterations
bound, document 0600 output for --hash-credentials (plus a stderr warning on
a group/other-accessible stdout file), and describe the deterministic dummy
salt in the no-oracle claims
Add the receiver-side --super / --no-super tri-state (Config->super_mode)
under the safe-subset + clear-refusal privilege model: FastSync never
elevates privileges, it only permits super-user attempts that are already
confined fd-relative below the authorized receive root.
- identity: privilege_super_permitted() gate (OFF=false, ON=true, AUTO follows
geteuid()==0); identity_apply_ownership/_link become no-ops when not
permitted; --super with no explicit identity policy implies raw numeric-id
preservation (explicit usermap/groupmap/chown/numeric-ids still win); warn
exactly once when --super is requested by a non-root receiver.
- file_receive: gate char/block device-node creation on the gate; FIFO/socket
handling is unchanged.
- wire: trailing super_mode int after the --iconv spec, validated 0..2 in
receive_privilege_options and validate_received_config; PROTOCOL_VERSION
2.17.0 -> 2.18.0; version-sensitive tests and docs updated.
- CLI: --super/--no-super parsed explicitly before the generic --no-* branch
(malformed --super=x rejected); usage text added.
- tests: config wire round-trip + invalid-value rejection, privilege-gate mode
unit test, CLI parse test, integration transfer + root-gated ownership
suppression/appliance tests.
- docs: RSYNC_COMPAT --super row + Wave E note, protocol mentions, README.
- write_all_sparse: skips all-zero runs >= 4096 bytes via lseek(SEEK_CUR) and
ftruncates the final size, wired into the atomic temp+rename and --inplace
paths with no wire change (full image already in memory).
- --partial retention: on a save failure after the temp held data, rename the
already-written temp to the destination path (best-effort; falls through to
unlink; never retains when --partial is off) so --append/--append-verify can
resume; tested by forcing futimens EINVAL with an out-of-range nsec.
- --block-size aliases --delta-block; verified config->delta_block_size is
honored by the delta engine end-to-end (unit + integration tests).
- fake_super_restore_fd: parses and re-applies user.fastsync.stat fd-relative
(fchown best-effort/non-root skipped, fchmod, futimens); a save under
--fake-super now both records and re-applies.
- -N/--crtimes and --stderr=client promoted to a new 'Impossible/Divergence'
status bucket (Summary: 136/2/4/3/2 = 147).
- cppcheck/clang-format clean; unit 37/37; integration 407 passed.
-c -> --checksum, -m -> --prune-empty-dirs, -M -> --remote-option,
-f -> --filter, -s -> --secluded-args, -p -> --perms, -T -> --temp-dir;
-a/--archive is now real rsync -rlptgoD (links+metadata+devices+specials).
FastSync's own flags moved to long-form-only or new shorts:
-j/--threads (multithreading), --preserve (metadata), --sendfile,
--chunk-serialization, --timeout, --ssh-port. Client-side only; the
wire config fields are unchanged (no PROTOCOL_VERSION bump). The server
keeps -p as its port. Docs (README, RSYNC_COMPAT summary 129->132) and
unit/integration tests updated. 37/37 unit, 400-pass integration.
RSYNC_COMPAT.md: flip --delete-before, --del/--delete-during, --delete-delay
and --delete-after to Implemented with precise notes (default-under--delete,
safety model, 2.7.0 -> 2.8.0 protocol bump, exact divergences from rsync).
README option tables list the new flags and the delete-after default.
#251 --remove-source-files deletes sources that were skipped receiver-side
(--existing/--ignore-existing/--update). The receiver now reports a
per-file outcome for every processed data file when the sender requests
removal; the client only unlinks sources the receiver actually wrote.
add remove_source_files to the wire config and bump the protocol to 2.5.0.
#252 --backup/--suffix/--backup-dir broken by NULL-vs-empty wire loss. Receivers
canonicalize the empty wire string back to NULL for backup_dir, temp_dir,
partial_dir and suffix, and --suffix is received unconditionally.
#253 --partial --partial-dir never installed completed files. file_save_to_disk
now renames a fully written partial-dir file into the real destination.
#255 STATUS_CHECK read the entire old file before the size/mtime quick check.
Old contents are only read when a checksum compare or delta needs them.
#256 receive_delta_file failure paths did not set *failed, so the caller sent
STATUS_NEXT and waited for a body that never came. Every NULL return now
marks the transfer failed.
#257 files >64 MiB could not transfer. Whole-file receive caps raised to the
256 MiB connection/allocation ceiling (chunk caps stay 64 MiB) and the
client ignores SIGPIPE so a server-side close surfaces as a clean error.
Unit tests added: config NULL-vs-empty round trip, incremental quick-check
skip/NEXT paths, delta oversize failure, partial-dir install, save-result
skip reporting.
TapTap