file_send_special now takes const File*; test_chunk declares the deserialized
Chunk* const. cppcheck (--error-exitcode=1) now exits clean; clang-format
clean; unit 29/29.
Capture+transmit source atime (pre-read stat; O_NOATIME sender guard) and birth
time (statx STATX_BTIME); receiver restores atime with mtime (crtime not settable
portably -> transmitted, explicitly not applied). --open-noatime is client-only.
-O/-J documented as accepted no-ops (FastSync never preserves dir/symlink times).
Wire: metadata frame gains atime/crtime val+sec+nsec; PROTOCOL_VERSION
2.11.0->2.12.0. Review fixes: gate atime capture to Linux (no epoch clobber on
non-Linux), close fd on fdopen failure, honest -O/-J status (Compat no-op).
Source files sharing (st_dev,st_ino) are recreated as hard links on the
destination; only the first member's data crosses the wire (siblings ride a
payload-less STATUS_HARDLINK frame). Ordering requires the single-FIFO-writer
receiver + forced sequential scan (documented). link()-failure falls back to a
byte-identical local copy. Rejects -s/--append. PROTOCOL_VERSION 2.11.0->2.12.0.
Review fixes: delete the dead HardLinkRegistry (ordering holds by FIFO writer),
and --existing no longer aborts when the first member is absent but the sibling
exists (leaves the sibling in place).
identity_parse_map freed the str_dup'd list before logging the offending rule
( points into that buffer), causing an invalid read caught by CI valgrind
(MSAN/MSAN-style; the ONLY definite valgrind error in the suite). Log before
freeing. valgrind now reports 0 errors / 0 definite leaks in both the parent
and the forked wire-roundtrip child.
identity_active_enabled() only gates identity_apply_ownership, which runs only
when metadata is present, so --numeric-ids must stay in the set: combined with
-M it activates raw-id application, while a standalone --numeric-ids (no
ownership-affecting flag) carries no metadata and correctly stays inert. My
earlier review fix removed it and broke 'owner not applied' for -M --numeric-ids
(uid 0 instead of the source ids). Revert that removal.
Receiver allocates the destination file's full size before streaming data
(posix_fallocate preferred, ftruncate fallback on EOPNOTSUPP/ENOSYS) so an
out-of-space transfer fails fast instead of partway. Additive config bool
crossing the wire; PROTOCOL_VERSION 2.10.0 -> 2.11.0. Threaded through all
store paths (atomic, inplace, partial/delay-updates staging, link-dest copy
fallback). Review hardening: explicit lseek(0) before the data write so
correctness does not depend on posix_fallocate leaving the fd offset unchanged.
Receiver-side ownership application, opt-in and privilege-gated:
- OFF for every existing transfer (plain -M/--preserve still never applies
ownership); only triggers on an explicit identity flag + receiver permission.
- EPERM/EACCES warn-and-continue (never aborts); other fchown errors escalate.
- fd-relative fchown after the file is written (symlink-safe, confined).
- New src/shared/identity.{c,h}; config fields numeric_ids / chown uid/gid /
usermap + groupmap id-pair tables cross the wire; PROTOCOL_VERSION 2.10.0
-> 2.11.0. CLI in client_cli.c; per-connection snapshot in server.c.
- Review fixes: EPERM/EACCES-only warn-and-continue, prominent root-receiver
notice, identity_clear_active on early server error paths, --numeric-ids
kept inert standalone (removed from activation trigger set).
- Replace --dist=loadgroup (a no-op: it only groups by xdist_group marks) with
--dist=load, and make module teardowns remove only their own SOURCE_DIR/DEST_DIR
(never the shared worker-keyed TEST_DATA_DIR) so interleaved modules can't wipe
each other's fixtures. Add a session-scoped cleanup of the per-worker dir.
(loadfile grouped the whole test_features.py module onto one worker and slowed
the full suite to 761s vs 224s with load.)
- Mark the two setpriv privilege tests with a 'setpriv' marker and run the full
merge suite as -m "not setpriv", so the dev/main gate can't go red on the
env-dependent /root-traversal tests regardless of the runner uid.
- Add a TLS basic test to the ci subset, add workflow_dispatch for on-demand full
runs, and fix trailing newlines.
- Measured: smoke -m ci = 28 passed/39s; full -n4 = 280 passed/11 skipped/1 xpassed
in 224s (was 860s serial).
- Add pytest-xdist to the CI Dockerfile (image -> v10).
- Worker-isolate TEST_DATA_DIR (PYTEST_XDIST_WORKER) so concurrent xdist
workers never collide on shared-filesystem fixtures.
- Register a 'ci' marker and tag a fast representative subset of integration
tests (basic TCP, incremental, compression, delete, basis, append).
- ci.yaml: lint + build + unit + the marked subset (-n4) on every PR; the
full integration suite plus sanitizer/fuzz/coverage/valgrind run only on
push to dev/main.
- Integration step runtime drops from ~860s (serial) to ~230s (-n4); the PR
gate lands well under ~3 minutes.
Unit: manifest_delete_missing_args treats a deeper missing entry whose
destination parent directory does not exist as a no-op (run continues, nothing
created). Integration (TestMissingArgs): a deeper missing entry with an absent
parent -R bare and full-mirror layouts, single-threaded and -m, no longer
aborts --delete (the extras walk still removes an unrelated extra); --dirs +
--files-from with --ignore-missing-args skips a listed-but-missing entry and
transfers the rest.
BLOCKER: an absent mirror whose PARENT directory does not exist on the
destination (a deeper --files-from missing entry, -R or full-mirror layout) was
treated as a hard failure because file_open_secure_parent returned -1 when the
parent was missing. That aborted the whole run, skipped the --delete extras
walk, and tore down an early --delete-before/during connection, contradicting
'missing mirror = no-op / all-missing succeeds'. A parent-open failure is now a
no-op when errno is ENOENT/ENOTDIR (matching file_remove_tree_secure); only a
genuine I/O error fails the run.
Also: an already-absent mirror reached via unlinkat-ENOENT no longer prints
'Deleted: <path>' (a no-op dressed as a deletion); the per-path 'Deleted:' line
is printed only when an entry was actually removed.
Precise notes for both rows: supported algorithms (xxh64/xxhash, md5 via EVP),
rejection of unsupported names, seed semantics (full 64-bit for whole-file,
low 32 bits for the delta block hash, ignored by md5), the --cc alias, the
length-prefixed bounded handshake digest, the 2.9.0 -> 2.10.0 protocol bump,
default byte-for-byte preservation, and the divergence from rsync's randomized
seed (FastSync defaults to seed 0). Summary count line is intentionally untouched.
Adds real algorithm selection (xxh64 default, plus md5 via OpenSSL EVP) and a
64-bit seed for the per-file whole-file digest used by the --incremental/
--checksum handshake and basis-dir content verification. The seed also feeds
the delta path's per-block xxHash32 strong checksum (low 32 bits) so an
explicit seed deterministically changes those digests too. Sender and receiver
hash identically: the algorithm id and seed cross the config wire frame and the
STATUS_CHECK handshake now carries a length-prefixed, bounded digest instead of
a fixed 64-bit value. Unsupported algorithm names are rejected at parse time
(never a silent no-op). PROTOCOL_VERSION bumped 2.9.0 -> 2.10.0; defaults
(xxh64, seed 0) preserve prior byte-for-byte behavior.
Flip both rows to Implemented with precise Notes covering the tail-resume
model, the prefix-verify semantics (and the plain-append rsync-parity safety
statement), the new wire frames, and the PROTOCOL_VERSION 2.9.0 -> 2.10.0 bump.
Add a Phase-3 append-wave implementation-notes block. The Summary count line
is deliberately left untouched.
- CLI: --append/--append-verify acceptance (parse + imply --incremental,
validate) and incompatibility rejection with -s and --whole-file; both
removed from the unimplemented reject list.
- Config: on-the-wire append/append_verify round-trip.
- Unit: append_resume_eligible / append_tail_length pure resume math.
- Integration (test_append.py): matching-prefix resume is byte-identical and
tail-only (wire bytes << source size); --append with a wrong prefix keeps
prefix+tail (rsync parity) while --append-verify detects the mismatch and
falls back to a byte-exact full transfer; --append with --inplace and -m.
Implement rsync's append modes: when an existing destination file is SHORTER
than the source, the receiver negotiates a resume offset and only the tail is
transferred; the full file (retained prefix + tail) is rebuilt and installed
through the normal atomic store path, so the result is byte-identical to the
source whenever the prefix matches.
- --append: sends the tail without content-verifying the retained prefix
(rsync parity; the documented prefix-trust risk).
- --append-verify: verifies the retained prefix against the source's prefix
xxHash64 before appending and, on a mismatch, falls back to a clean full
transfer (never a corrupt prefix+tail blend).
New wire frames STATUS_APPEND / STATUS_APPEND_SIG / STATUS_APPEND_OK /
STATUS_APPEND_DATA; PROTOCOL_VERSION bumped 2.9.0 -> 2.10.0 (peers must match).
Both flags imply --incremental and are incompatible with -s (chunk
serialization) and --whole-file (rejected up front). Respects --inplace,
--partial/--partial-dir and --delay-updates via the shared store engine.
Precise Notes on the arg model (files-from entries), implies-relationships
(delete-missing implies ignore, independent of --delete), delete/timing/force/
exclude-protection interplay, the third manifest section and the 2.9.0 -> 2.10.0
wire bump, and the divergences (empty-list hard error, no negation, max-delete
not applied to explicit deletions). The files-from row now references the flags.
The Summary count line is intentionally left for a recount commit.
Unit: CLI parse + imply relationships (delete-missing implies ignore, not
delete; valid with --delete and delete timing); delete_missing_args config wire
round-trip (ignore_missing_args confirmed client-only); three-section manifest
round-trip and third-section traversal rejection; manifest_delete_missing_args
exact-path semantics; commit-time parking. Existing two-section manifest frames
updated to the three-section format. Integration: default missing entry is a
hard pre-transfer error; --ignore-missing-args transfers the rest and succeeds
(all-missing transfers nothing; empty list still errors); --delete-missing-args
removes exactly the missing mirror and leaves unrelated extras unless --delete is
also present; filter-exclusion protection never blocks the explicit deletion;
--delete-before early timing composes; all parametrized single-threaded vs -m.
New flags parse onto the config; --delete-missing-args implies
--ignore-missing-args (order-independent) and does NOT imply --delete (rsync:
independent of other delete processing). The files-from preflight now classifies
listed-but-missing entries instead of hard-failing: under the flags each is
skipped (logged + counted, never silent) and the run succeeds for the rest,
including the all-missing case; an empty list stays a hard error. Under
--delete-missing-args the missing entries' destination mirrors (bare relative
path with -R, full source mirror otherwise) ride the manifest's third section in
both the single-threaded and -m senders; --dirs listed-but-missing entries are
skipped in the scanner.
PROTOCOL_VERSION 2.9.0 -> 2.10.0. The STATUS_MANIFEST frame gains a third
section carrying destination-relative exact-delete paths (the missing
--files-from entries' mirrors); the config frame gains a delete_missing_args
bool (ignore_missing_args stays client-only). The receiver validates the third
section like the keep-set and commits it with manifest_delete_all():
manifest_delete_missing_args runs first (explicit user requests, never blocked
by protected-prefix exclusion protection; staging/basis protected; a non-empty
directory mirror removed only under --force/--delete, rsync parity) and then the
ordinary extras walk. Server --allow-delete gates it like --delete.
TapTap