Capture+transmit source atime (pre-read stat; O_NOATIME sender guard) and birth
time (statx STATX_BTIME); receiver restores atime with mtime (crtime not settable
portably -> transmitted, explicitly not applied). --open-noatime is client-only.
-O/-J documented as accepted no-ops (FastSync never preserves dir/symlink times).
Wire: metadata frame gains atime/crtime val+sec+nsec; PROTOCOL_VERSION
2.11.0->2.12.0. Review fixes: gate atime capture to Linux (no epoch clobber on
non-Linux), close fd on fdopen failure, honest -O/-J status (Compat no-op).
Source files sharing (st_dev,st_ino) are recreated as hard links on the
destination; only the first member's data crosses the wire (siblings ride a
payload-less STATUS_HARDLINK frame). Ordering requires the single-FIFO-writer
receiver + forced sequential scan (documented). link()-failure falls back to a
byte-identical local copy. Rejects -s/--append. PROTOCOL_VERSION 2.11.0->2.12.0.
Review fixes: delete the dead HardLinkRegistry (ordering holds by FIFO writer),
and --existing no longer aborts when the first member is absent but the sibling
exists (leaves the sibling in place).
Receiver allocates the destination file's full size before streaming data
(posix_fallocate preferred, ftruncate fallback on EOPNOTSUPP/ENOSYS) so an
out-of-space transfer fails fast instead of partway. Additive config bool
crossing the wire; PROTOCOL_VERSION 2.10.0 -> 2.11.0. Threaded through all
store paths (atomic, inplace, partial/delay-updates staging, link-dest copy
fallback). Review hardening: explicit lseek(0) before the data write so
correctness does not depend on posix_fallocate leaving the fd offset unchanged.
Receiver-side ownership application, opt-in and privilege-gated:
- OFF for every existing transfer (plain -M/--preserve still never applies
ownership); only triggers on an explicit identity flag + receiver permission.
- EPERM/EACCES warn-and-continue (never aborts); other fchown errors escalate.
- fd-relative fchown after the file is written (symlink-safe, confined).
- New src/shared/identity.{c,h}; config fields numeric_ids / chown uid/gid /
usermap + groupmap id-pair tables cross the wire; PROTOCOL_VERSION 2.10.0
-> 2.11.0. CLI in client_cli.c; per-connection snapshot in server.c.
- Review fixes: EPERM/EACCES-only warn-and-continue, prominent root-receiver
notice, identity_clear_active on early server error paths, --numeric-ids
kept inert standalone (removed from activation trigger set).
Precise notes for both rows: supported algorithms (xxh64/xxhash, md5 via EVP),
rejection of unsupported names, seed semantics (full 64-bit for whole-file,
low 32 bits for the delta block hash, ignored by md5), the --cc alias, the
length-prefixed bounded handshake digest, the 2.9.0 -> 2.10.0 protocol bump,
default byte-for-byte preservation, and the divergence from rsync's randomized
seed (FastSync defaults to seed 0). Summary count line is intentionally untouched.
Flip both rows to Implemented with precise Notes covering the tail-resume
model, the prefix-verify semantics (and the plain-append rsync-parity safety
statement), the new wire frames, and the PROTOCOL_VERSION 2.9.0 -> 2.10.0 bump.
Add a Phase-3 append-wave implementation-notes block. The Summary count line
is deliberately left untouched.
Precise Notes on the arg model (files-from entries), implies-relationships
(delete-missing implies ignore, independent of --delete), delete/timing/force/
exclude-protection interplay, the third manifest section and the 2.9.0 -> 2.10.0
wire bump, and the divergences (empty-list hard error, no negation, max-delete
not applied to explicit deletions). The files-from row now references the flags.
The Summary count line is intentionally left for a recount commit.
The walker's all-or-nothing guarantee holds only while the destination is not
concurrently modified (rehearsal and delete are separate walks). The
protected-prefix list shares the 16 MB MAX_MANIFEST_BYTES budget with the
keep-set and each section is capped at MAX_MANIFEST_ENTRIES; an over-budget
frame is rejected on the receiver with STATUS_ERROR rather than truncated.
Review follow-ups on the --fuzzy row: note that the receiver's block
signature is derived from a sibling file it may not otherwise send, exposing
destination sibling files to the sender at block granularity (the same
known-plaintext information class as the ordinary delta path); and document
that --fuzzy honors an explicit --no-incremental (unlike the basis-dir
options, which force it), with the delta implication suppressed accordingly.
--delete-excluded/--max-delete/--ignore-errors/--force/--prune-empty-dirs now
✅ with precise notes: the rsync-parity default (plain --delete protects
filter-excluded destination mirrors), the -m divergence (FastSync -m stays
multithreading, so --prune-empty-dirs is long-only), the all-or-nothing
max-delete/hard-bound error model, the 2.8.0 -> 2.9.0 protocol bump, and the
new two-section STATUS_MANIFEST frame. Summary counts left for the orchestrator
to recount after the wave.
Document the receiver-side decision location, the exact deterministic
similarity heuristic, the byte-exactness argument, when fuzzy applies (and
when it deliberately does not), the 2.8.0 -> 2.9.0 protocol bump, and the
divergences from rsync. Update the basis-dir rows' protocol references to
the now-current 2.9.0.
- --link-dest destination entries share the basis inode: a later --inplace run
against such a path mutates the basis snapshot through the shared inode
(recommend --copy-dest when the destination must stay independently writable).
- basis-hit files take mode/uid/gid and mtime from the basis file, not the
sender's metadata (with --size-only the mtime can differ from the source).
- --remove-source-files sources satisfied by a basis dir are retained.
- basis runs refuse files above the 256 MiB whole-file limit up front (FastSync
caps every whole-file payload path at 256 MiB; rsync supports arbitrary sizes);
the config frame always carries a basis-count field (protocol 2.8.0).
Usage help now gives --delete-during a complete description with --del on its
own line, and notes that timing flags imply --delete while timing+--no-delete
is rejected regardless of argument order. RSYNC_COMPAT.md documents: the
receiver's MAX_MANIFEST_ENTRIES/MAX_MANIFEST_BYTES caps now abort an early-mode
run before any data (previously only the deletion step failed), the extended
early-delete ACK deadline, and the order-independent flag-conflict policy.
RSYNC_COMPAT.md: flip --delete-before, --del/--delete-during, --delete-delay
and --delete-after to Implemented with precise notes (default-under--delete,
safety model, 2.7.0 -> 2.8.0 protocol bump, exact divergences from rsync).
README option tables list the new flags and the delete-after default.
Document receiver-side basis semantics, relative-to-destination-root
confinement, content-verified matching, hard-link vs copy vs compare-only
behavior, cross-filesystem copy fallback, repetition/priority, --delete
exclusion, the implied --incremental and -s incompatibility, and each exact
divergence from rsync (no dest deletion on compare-dest stale entries, no
attribute re-application on basis hits, no re-linking of already-up-to-date
dest files, sources matched from basis dirs kept under --remove-source-files).
B1: destination-root existence/creation mishandled two legitimate forms.
file_directory_exists_secure/file_ensure_directory_secure now normalize a
trailing-slash destination (so the last component is never an empty leaf)
and treat a destination equal to the already-open authorized root as present
(no spurious <root>/<basename> nested dir with --mkpath). Confinement and
O_NOFOLLOW probing are unchanged. Regression integration tests: existing
dest with trailing slash works with and without --mkpath; dest == authorized
root works and creates no stray nested dir.
W1: chunk serialize/deserialize round-trip unit test for a directory entry
mixed with a regular file, with and without metadata; --dirs coverage under
-s and -s -m.
W2: --list-only and --dry-run now print file_wire_path() so all outputs show
the -R transformed relative name, matching -i/--out-format.
W3: RSYNC_COMPAT -d/--dirs note: dirs are created immediately under
--delay-updates (only regular files are staged).
W4: --dirs generator flushes chunks by element count too, so a long
--files-from list of empty directories cannot exceed the per-chunk file cap.
N1: STATUS_MKDIR added to status_to_string.
N2: removed dead TestMkpath._transfer.
N3: removed redundant --no-implied-dirs OPTION_TABLE row.
N4: integration tests: --dirs --delete keeps the just-created empty dir (and
deletes extras); a listed dir colliding with a regular file at the dest fails
cleanly.
RSYNC_COMPAT Phase-2 row M: path-list construction and destination
directory creation while preserving traversal safety.
- -R/--relative with --files-from: transmit each listed entry under its
bare relative destination path (no source-root mirror). Files keep an
absolute local read path plus a separate wire/dest path (File.send_path);
manifest, incremental quick-check and change output follow the wire path,
so --delete and --remove-source-files stay consistent. -R without
--files-from is unchanged (full mirror).
- --no-implied-dirs: client-only, only meaningful with -R + --files-from.
A listed file whose parent dir is not itself (or via an ancestor)
explicitly listed cannot be placed; the run fails up front with a clear
error. No effect otherwise.
- --dirs/-d + --old-dirs/--old-d aliases: -d <dir> transmits the source
root as an explicit empty directory entry (STATUS_MKDIR frame); with
--files-from listed dirs are created empty and listed files transferred,
never descending. Works single-threaded, -m (sequential scanner in the
-m scan thread) and chunk-serialization (per-file type marker).
Directory entries appear in the delete manifest.
- --mkpath: new wire bool; server creates the destination root (and missing
leading components under its authorized root) at connection start. A
missing destination root is now rejected by default.
- Protocol bumped to 2.7.0 (mkpath wire field + STATUS_MKDIR + chunk type
marker). All receive paths funnel through file_save_to_disk_full which
creates directories via the secure confined mkdir engine; dir entries are
excluded from --remove-source-files outcome acknowledgements on both ends.
- Unit coverage: CLI parse (relative/dirs aliases/mkpath/no-implied-dirs),
config round-trip (relative + mkpath), scanner --dirs non-recursion and
-R send_path (sequential + parallel), receiver dir-entry save.
- Integration coverage: TestRelativeFilesFrom, TestNoImpliedDirs, TestDirs,
TestMkpath (single and -m).
- RSYNC_COMPAT: 4 rows move to Implemented (Summary 67/3/5/1/71 = 147).
Review fixes for --delay-updates:
- --delete no longer deletes the staged files: the delete walker gains a
skip_root_child parameter and receive_manifest passes DELAY_UPDATES_STAGING_DIR
when delay_updates is active, so deletion removes genuine extras while the
staging dir (a direct child of the receive root) is left for publication in
both single and -m modes.
- --backup-dir is rejected when it collides with the reserved internal staging
name .fastsync-stage (trailing slash normalized), in client validation and in
the received-config wire validation, preventing old backups from being
silently installed as new files.
- Staging dir is now held under an exclusive advisory flock for the whole
transfer (context lifetime): two simultaneous delayed transfers to one
destination root no longer share/destroy each other's staged data - the
second fails cleanly. Cleanup only touches the staging dir when this context
owns the lock, so a lock-contention failure cannot wipe a live session.
- Post-publish staging cleanup now returns/logs instead of discarding failures
(warning when the staging dir cannot be fully removed).
- Reworked the publish-failure integration test to exercise real mid-publish
semantics (top-level file published, nested rename fails, no rollback,
sources retained under --remove-source-files) and added integration tests for
--delete + --delay-updates ordering and reserved --backup-dir rejection.
- RSYNC_COMPAT note documents delete ordering, the reserved-name hazard, and
the concurrency guard.
Address an independent c-review of the files-from/filter feature:
- .rsync-filter precedence now matches rsync: evaluate the innermost
(current) directory's rules first, then ancestors, then the command-line
base (--filter/-C), so a deeper file's '+' can re-include what a shallower
'-' excluded (regression tests in both scan modes; single-thread and -m).
- --files-from: a listed entry missing on disk and an empty list are now hard
errors surfaced pre-transfer in send_files, send_files_multithreaded,
dry-run and --list-only; '.' (whole tree) and empty listed dirs stay valid.
- scanner_path_relative now handles a transfer root of / (previously the
scanner aborted on children of /).
- Reject unsupported rsync filter syntax explicitly (no silent no-ops):
+/- modifiers other than '/' (! C s r p x) and rules beginning with ':'/'.'
/'!' (merge/dir-merge/list-clear shorthands). Docs updated.
- -0/--from0 NUL mode preserves entry bytes (no CR/LF trimming); only newline
mode trims. Absolute-entry error message no longer includes the newline.
- --no-from0/--no-cvs-exclude registered as negatable booleans.
- RSYNC_COMPAT rows updated for the precedence, rejection list, NUL-mode
detail and the documented O(entries x files) scalability bound of the
allow-set (Summary unchanged: 62/3/5/1/76 = 147).
Implement the RSYNC_COMPAT Phase-2 filter/parser feature group:
- --files-from=FILE (repeatable) plus -0/--from0 NUL delimiters: parse the
source file list relative to the source root into a shared read-only
allow-set; the scanner transfers listed files and the whole subtree of
listed directories and prunes everything else in single- and
multithreaded mode. Absolute/'..' entries and missing files are hard
CLI errors.
- --filter=RULE: rsync-style +/- rules (anchored '/', dir-only trailing '/',
word include/exclude forms) evaluated first-match-wins with a default of
include, as an independent layer from legacy --exclude/--include.
Unsupported directives (merge/hide/... ) are rejected explicitly. -f stays
sendfile.
- -C/--cvs-exclude: well-known rsync CVS default exclude set.
- -F: per-directory .rsync-filter files read during traversal and applied to
the owning directory's subtree (single + parallel), never transferred.
- Delete manifest still derives from what was actually sent.
Client-only config fields; no wire/protocol change. Adds unit coverage
(CLI parse, allow-set and filter scanning single+parallel) and integration
tests (TestFilesFrom, TestFilters). RSYNC_COMPAT matrix rows updated:
5 rows move to Implemented (Summary 62/3/5/1/76 = 147).
Stage every successfully written file under a private 0700 .fastsync-stage
directory inside the receive root and atomically publish all staged files
only after the whole protocol stream (manifest/delete handling included)
has completed, immediately before the success/outcome frame. On any
abort/error before publication nothing is installed and staging is removed;
a publish failure aborts the transfer with best-effort cleanup of the
remainder (already-published files are not rolled back). Crash leftovers
are wiped when the next delayed transfer starts.
Wire: new delay_updates config flag (selection-options block), protocol
version bumped to 2.6.0, client/server validation rejects --inplace.
CLI/usage/validation updated. Works in single-threaded and -m modes
(exactly one write_thread stages files; the staged-file registry is
mutex-protected; publication runs once after both threads join).
--existing/--ignore-existing/--update decide against the final destination
at stage time; --backup is deferred to publication. remove_source_files
outcomes are only sent after publication so skipped/unpublished sources are
never deleted. Default (no flag) behavior is unchanged.
Tests: config wire round-trip, CLI parse, --inplace rejection, new
test_delay_updates unit suite (27 suites total), and integration
TestDelayUpdates covering single/-m parity, incremental reruns, remove
source files, receiver-skip ordering, and a deterministic publish-failure
abort path.
Receiver writes temps into a confined scratch dir and atomically renames
into place; EXDEV aborts; inplace/partial bypass; thread-safe temp names.
Uses existing wire field; no protocol bump. Reviewed (c-review APPROVE
WITH NITS, all fixed); PR #262.
Address c-review nits on the itemize/output feature:
- RSYNC_COMPAT.md: state that %b is the source length (always == %l) because
no wire-byte counter exists; keep Summary equal to the matrix (recounted:
54 implemented / 84 not-implemented, 147 rows total - four rows flipped).
- change_list.h/.c: document bytes_sent == size; note itemize/out-format lines
never interleave with each other but may interleave with legacy log
messages sharing the stream; mark the %M stat() path best-effort.
- change_render_format scan in format_uses_mtime now mirrors the tokenizer
(skips '%%' and unknown '%X' pairs) so a literal '%%M' no longer triggers
the stat() fallback.
- Integration tests: --list-only under -m; a changed file on a second
--incremental run emits exactly one '>f' line while unchanged files print
nothing; --log-file + --log-file-format under -m.
Add a rootless unit test that reaches the actual st_dev skip branch in both
the sequential and parallel (-m) scanners: a symlink nested under the scan
root points at a directory on /dev/shm (a different device than the build
fs) and, under --copy-links semantics, -x must drop that subtree while a
plain scan includes it. Skips only when no cross-device target exists.
Integration OneFileSystem test now cleans both dest dirs up front and
reports a busy test mountpoint instead of ignoring the umount result.
RSYNC_COMPAT.md notes that cross-filesystem mount-point subdirectories are
dropped entirely (rsync parity).
Implement rsync-style itemized output backed by one shared change-event
engine (src/client/change_list.c):
- -i/--itemize-changes prints ">f+++++++++ <path>" for files actually sent
(single-threaded and -m); unchanged files print nothing.
- --list-only prints an ls-style listing of files that would be transferred
without contacting the server or writing anything.
- --out-format=FORMAT prints a printf-style template per changed file
(tokens %%f %%n %%l %%b %%M %%%%; unknown escapes preserved).
- --log-file-format=FMT logs each transferred file when --log-file is set.
Events are emitted from the per-file sender path shared by both transfer
modes, so the single sender thread is the only reporter (no races).
Capture the transfer root's device (st_dev) at scanner creation and skip
descending into any subdirectory on a different device (a mount point).
Implemented sender/client-side only: sequential BFS and parallel (-m) root
scan apply the same scanner_same_filesystem decision; no wire/protocol change
and default behavior is unchanged. Unit tests cover the pure decision, same
device scanning in both modes, and CLI parsing; integration tests prove -x
leaves a single-filesystem tree byte-identical and, when root can mount a
tmpfs, skips a genuine cross-device subtree.
Reconcile the security-fixes branch's RSYNC_COMPAT.md updates onto dev:
- Keep dev's implemented statuses as authoritative and port the previously
undocumented rsync 3.4.1 rows (one-file-system, -F, temp-dir/-T, identity
mapping options, remote-option/-M, max-alloc) with code-verified statuses.
- Add the Implementation Difficulty Plan (Phases 1-6 + delivery order) as the
sequencing roadmap; note that it is a superset snapshot and the Summary
matrix is authoritative for shipped features.
- Recomputed the Summary counts from the table (was stale on dev): 51
implemented / 3 alt-arg / 5 partial / 1 no-op / 87 not implemented.
TapTap