Deletion timing is now real and selected by the four rsync flags plus the
plain --delete default. Wire protocol bumps to 2.8.0: two new config
booleans (delete_during, delete_delay) are serialized and validated, joining
the existing delete_before/delete_after.
- Early modes (--delete-before, --delete-during/--del): the sender pre-scans
the whole tree (paths only), transmits the keep-set manifest BEFORE any
file data, and the receiver removes extras and acks STATUS_OK; the sender
only streams data after the deletion committed. Deletion is thus performed
even if a later transfer phase fails (rsync delete-before/during are
destructive by definition). FastSync streams in a single scan so it cannot
interleave per-directory like rsync delete-during; --delete-during selects
the same engine mode as --delete-before (documented divergence).
- Late/commit modes (plain --delete, --delete-after, --delete-delay): the
manifest closes the data stream and deletion is committed only after
STATUS_FINISHED proves the whole transfer succeeded, preserving FastSync's
commit-style safety. --delete-delay converges with --delete-after because
FastSync never snapshots the destination during data flow (documented).
- The STATUS_MANIFEST frame is now self-delimiting and position-independent.
Single-threaded receivers delete before the success frame; the -m receiver
hands the keep-set to server.c, which commits the deletion only after the
disk writer thread has drained (fixes a delete-vs-in-flight-temp race).
- Every timing flag implies --delete; at most one timing flag is allowed.
- Each timing flag implies --delete, matching rsync; conflicts are rejected.
The receiver's per-file incremental check now consults the ordered basis-dir
list whenever the destination is not already up to date. An exact basis match
requires equal size, equal mtime (unless --size-only; --ignore-times disables
basis matching like rsync), and an equal content xxHash64 -- the sender sends
its xxHash for every file whenever basis dirs are configured (not only under
--checksum), so a hard link or local copy is only ever made from byte-identical
content.
On a match:
- compare-dest: reply STATUS_OK and skip data only when the destination does
not already hold the file (sparse, rsync parity). A destination that holds
a DIFFERENT version falls back to a normal transfer instead of rsync's
delete, keeping the mirror complete.
- copy-dest: reply STATUS_OK and hand a synthetic File (bytes read from the
basis file, basis metadata) to the normal store sink, so the file is
installed as a real local copy through the existing atomic temp+rename
engine and honors --existing/--ignore-existing/--update/--backup/
--delay-updates/--partial-dir unchanged.
- link-dest: same, but File.basis_link records the basis path and the store
engine calls the new file_to_disk_secure_link(): an atomic temp hard link +
rename. Cross-filesystem/refused links fall back to a byte-identical local
copy (never a corrupt or partial file); the copy fallback applies metadata,
while a successful link keeps the basis inode's own attributes so the basis
file is never mutated.
Basis-materialized files carry File.skip so they are not acknowledged to a
--remove-source-files sender (the sender already saw STATUS_OK and keeps the
source). The no-match path is byte-for-byte identical to the existing delta /
full-data transfer.
B1: destination-root existence/creation mishandled two legitimate forms.
file_directory_exists_secure/file_ensure_directory_secure now normalize a
trailing-slash destination (so the last component is never an empty leaf)
and treat a destination equal to the already-open authorized root as present
(no spurious <root>/<basename> nested dir with --mkpath). Confinement and
O_NOFOLLOW probing are unchanged. Regression integration tests: existing
dest with trailing slash works with and without --mkpath; dest == authorized
root works and creates no stray nested dir.
W1: chunk serialize/deserialize round-trip unit test for a directory entry
mixed with a regular file, with and without metadata; --dirs coverage under
-s and -s -m.
W2: --list-only and --dry-run now print file_wire_path() so all outputs show
the -R transformed relative name, matching -i/--out-format.
W3: RSYNC_COMPAT -d/--dirs note: dirs are created immediately under
--delay-updates (only regular files are staged).
W4: --dirs generator flushes chunks by element count too, so a long
--files-from list of empty directories cannot exceed the per-chunk file cap.
N1: STATUS_MKDIR added to status_to_string.
N2: removed dead TestMkpath._transfer.
N3: removed redundant --no-implied-dirs OPTION_TABLE row.
N4: integration tests: --dirs --delete keeps the just-created empty dir (and
deletes extras); a listed dir colliding with a regular file at the dest fails
cleanly.
RSYNC_COMPAT Phase-2 row M: path-list construction and destination
directory creation while preserving traversal safety.
- -R/--relative with --files-from: transmit each listed entry under its
bare relative destination path (no source-root mirror). Files keep an
absolute local read path plus a separate wire/dest path (File.send_path);
manifest, incremental quick-check and change output follow the wire path,
so --delete and --remove-source-files stay consistent. -R without
--files-from is unchanged (full mirror).
- --no-implied-dirs: client-only, only meaningful with -R + --files-from.
A listed file whose parent dir is not itself (or via an ancestor)
explicitly listed cannot be placed; the run fails up front with a clear
error. No effect otherwise.
- --dirs/-d + --old-dirs/--old-d aliases: -d <dir> transmits the source
root as an explicit empty directory entry (STATUS_MKDIR frame); with
--files-from listed dirs are created empty and listed files transferred,
never descending. Works single-threaded, -m (sequential scanner in the
-m scan thread) and chunk-serialization (per-file type marker).
Directory entries appear in the delete manifest.
- --mkpath: new wire bool; server creates the destination root (and missing
leading components under its authorized root) at connection start. A
missing destination root is now rejected by default.
- Protocol bumped to 2.7.0 (mkpath wire field + STATUS_MKDIR + chunk type
marker). All receive paths funnel through file_save_to_disk_full which
creates directories via the secure confined mkdir engine; dir entries are
excluded from --remove-source-files outcome acknowledgements on both ends.
- Unit coverage: CLI parse (relative/dirs aliases/mkpath/no-implied-dirs),
config round-trip (relative + mkpath), scanner --dirs non-recursion and
-R send_path (sequential + parallel), receiver dir-entry save.
- Integration coverage: TestRelativeFilesFrom, TestNoImpliedDirs, TestDirs,
TestMkpath (single and -m).
- RSYNC_COMPAT: 4 rows move to Implemented (Summary 67/3/5/1/71 = 147).
Address an independent c-review of the files-from/filter feature:
- .rsync-filter precedence now matches rsync: evaluate the innermost
(current) directory's rules first, then ancestors, then the command-line
base (--filter/-C), so a deeper file's '+' can re-include what a shallower
'-' excluded (regression tests in both scan modes; single-thread and -m).
- --files-from: a listed entry missing on disk and an empty list are now hard
errors surfaced pre-transfer in send_files, send_files_multithreaded,
dry-run and --list-only; '.' (whole tree) and empty listed dirs stay valid.
- scanner_path_relative now handles a transfer root of / (previously the
scanner aborted on children of /).
- Reject unsupported rsync filter syntax explicitly (no silent no-ops):
+/- modifiers other than '/' (! C s r p x) and rules beginning with ':'/'.'
/'!' (merge/dir-merge/list-clear shorthands). Docs updated.
- -0/--from0 NUL mode preserves entry bytes (no CR/LF trimming); only newline
mode trims. Absolute-entry error message no longer includes the newline.
- --no-from0/--no-cvs-exclude registered as negatable booleans.
- RSYNC_COMPAT rows updated for the precedence, rejection list, NUL-mode
detail and the documented O(entries x files) scalability bound of the
allow-set (Summary unchanged: 62/3/5/1/76 = 147).
Implement the RSYNC_COMPAT Phase-2 filter/parser feature group:
- --files-from=FILE (repeatable) plus -0/--from0 NUL delimiters: parse the
source file list relative to the source root into a shared read-only
allow-set; the scanner transfers listed files and the whole subtree of
listed directories and prunes everything else in single- and
multithreaded mode. Absolute/'..' entries and missing files are hard
CLI errors.
- --filter=RULE: rsync-style +/- rules (anchored '/', dir-only trailing '/',
word include/exclude forms) evaluated first-match-wins with a default of
include, as an independent layer from legacy --exclude/--include.
Unsupported directives (merge/hide/... ) are rejected explicitly. -f stays
sendfile.
- -C/--cvs-exclude: well-known rsync CVS default exclude set.
- -F: per-directory .rsync-filter files read during traversal and applied to
the owning directory's subtree (single + parallel), never transferred.
- Delete manifest still derives from what was actually sent.
Client-only config fields; no wire/protocol change. Adds unit coverage
(CLI parse, allow-set and filter scanning single+parallel) and integration
tests (TestFilesFrom, TestFilters). RSYNC_COMPAT matrix rows updated:
5 rows move to Implemented (Summary 62/3/5/1/76 = 147).
Implement rsync-style itemized output backed by one shared change-event
engine (src/client/change_list.c):
- -i/--itemize-changes prints ">f+++++++++ <path>" for files actually sent
(single-threaded and -m); unchanged files print nothing.
- --list-only prints an ls-style listing of files that would be transferred
without contacting the server or writing anything.
- --out-format=FORMAT prints a printf-style template per changed file
(tokens %%f %%n %%l %%b %%M %%%%; unknown escapes preserved).
- --log-file-format=FMT logs each transferred file when --log-file is set.
Events are emitted from the per-file sender path shared by both transfer
modes, so the single sender thread is the only reporter (no races).
Capture the transfer root's device (st_dev) at scanner creation and skip
descending into any subdirectory on a different device (a mount point).
Implemented sender/client-side only: sequential BFS and parallel (-m) root
scan apply the same scanner_same_filesystem decision; no wire/protocol change
and default behavior is unchanged. Unit tests cover the pure decision, same
device scanning in both modes, and CLI parsing; integration tests prove -x
leaves a single-filesystem tree byte-identical and, when root can mount a
tmpfs, skips a genuine cross-device subtree.
#251 --remove-source-files deletes sources that were skipped receiver-side
(--existing/--ignore-existing/--update). The receiver now reports a
per-file outcome for every processed data file when the sender requests
removal; the client only unlinks sources the receiver actually wrote.
add remove_source_files to the wire config and bump the protocol to 2.5.0.
#252 --backup/--suffix/--backup-dir broken by NULL-vs-empty wire loss. Receivers
canonicalize the empty wire string back to NULL for backup_dir, temp_dir,
partial_dir and suffix, and --suffix is received unconditionally.
#253 --partial --partial-dir never installed completed files. file_save_to_disk
now renames a fully written partial-dir file into the real destination.
#255 STATUS_CHECK read the entire old file before the size/mtime quick check.
Old contents are only read when a checksum compare or delta needs them.
#256 receive_delta_file failure paths did not set *failed, so the caller sent
STATUS_NEXT and waited for a body that never came. Every NULL return now
marks the transfer failed.
#257 files >64 MiB could not transfer. Whole-file receive caps raised to the
256 MiB connection/allocation ceiling (chunk caps stay 64 MiB) and the
client ignores SIGPIPE so a server-side close surfaces as a clean error.
Unit tests added: config NULL-vs-empty round trip, incremental quick-check
skip/NEXT paths, delta oversize failure, partial-dir install, save-result
skip reporting.
- file.c split layout retained; security-hardened secure-fs helpers
(open_secure_parent/to_disk_secure/rename_secure/stat_secure) now live in
file.c with file_ prefix and are shared with file_receive.c
- file_receive.c takes the security branch's bounded allocations
(receive_data_limited, data_decompress_limited, size checks) and
STATUS_ERROR signaling
- file_send.c gains the data consistency check on file->data
- client_validation.c: stricter --tls requiring --ca, log_message style
- utils.c: hardened openat/mkdirat mkdir_r from security branch
- Add log_perror() helper (context + strerror(errno)) to the log module
- Replace all bare perror() calls with log_perror() so errors are routed
through the unified logger (stderr sink + optional --log-file sink)
- Convert fprintf(stderr, "Error:/Warning: ...") in client code to
log_message(); raw fprintf kept only for progress/stats output
- Extract print_transfer_progress() shared by single-threaded loop and
the multithreaded progress thread
- Route all send_files() exits through a single send_fail cleanup path
- Fix pre-existing manifest leak on success without --delete
TapTap