Merge branch 'refactor/cfg' into refactor/structural

This commit is contained in:
2026-09-22 14:06:55 +02:00
9 changed files with 126 additions and 113 deletions
+1 -1
View File
@@ -245,7 +245,7 @@ static char* change_render_name_uptodate(const ChangeEvent* event) {
* resolves to xxh128, so an explicit selection and the default both render the
* selected algorithm's digest. */
static ChecksumAlgo out_format_checksum_algo(const Config* config) {
return (ChecksumAlgo)config->checksum_transfer_algo;
return (ChecksumAlgo)config->cli.checksum_transfer_algo;
}
/* Render a digest as rsync's sum_as_hex: xxh128 prints the HIGH 64-bit half
+34 -31
View File
@@ -170,7 +170,7 @@ static int set_positive_int_option(int* dest, const char* value, const char* opt
* name is a hard error with rsync's exit code 4, never a silent no-op. */
static int set_compression_choice(Config* config, const char* value) {
if (!value) {
config->cli_exit_code = 4;
config->cli.cli_exit_code = 4;
return -1;
}
int algo;
@@ -178,7 +178,7 @@ static int set_compression_choice(Config* config, const char* value) {
algo = compression_choice_resolve();
if (algo < 0) {
log_message(LOG_LEVEL_ERROR, "RSYNC_COMPRESS_LIST names no supported compression algorithm");
config->cli_exit_code = 4;
config->cli.cli_exit_code = 4;
return -1;
}
} else {
@@ -189,7 +189,7 @@ static int set_compression_choice(Config* config, const char* value) {
"--compress-choice '%s' is not a supported algorithm; FastSync supports zstd, "
"lz4, zlib, zlibx, none or auto",
value);
config->cli_exit_code = 4;
config->cli.cli_exit_code = 4;
return -1;
}
const char* canonical = compression_algo_name((CompressionAlgo)algo);
@@ -226,7 +226,7 @@ static int resolve_checksum_name(const char* name, size_t len, int* out) {
* resolves to FastSync's negotiated default (xxh128). */
static int set_checksum_choice(Config* config, const char* value) {
if (!value) {
config->cli_exit_code = 4;
config->cli.cli_exit_code = 4;
return -1;
}
const char* comma = strchr(value, ',');
@@ -244,7 +244,7 @@ static int set_checksum_choice(Config* config, const char* value) {
"--checksum-choice '%s' is invalid; FastSync supports xxh64 (or xxhash), xxh128, "
"xxh3, md5, md4, sha1, none or auto, optionally as 'transfer,pre-transfer'",
value);
config->cli_exit_code = 4;
config->cli.cli_exit_code = 4;
return -1;
}
int negotiated = -1;
@@ -252,7 +252,7 @@ static int set_checksum_choice(Config* config, const char* value) {
negotiated = checksum_choice_resolve();
if (negotiated < 0) {
log_message(LOG_LEVEL_ERROR, "RSYNC_CHECKSUM_LIST names no supported checksum algorithm");
config->cli_exit_code = 4;
config->cli.cli_exit_code = 4;
return -1;
}
}
@@ -264,8 +264,8 @@ static int set_checksum_choice(Config* config, const char* value) {
pre = negotiated;
config->checksum_algo = pre;
config->checksum_transfer_algo = transfer;
config->checksum_choice_set = true;
config->cli.checksum_transfer_algo = transfer;
config->cli.checksum_choice_set = true;
/* rsync: "none" for the transfer checksum forces --whole-file. */
if (transfer == (int)CHECKSUM_ALGO_NONE)
config->whole_file = true;
@@ -963,7 +963,10 @@ static const OptionEntry OPTION_TABLE[] = {
* faithful no-op (accepted silently, never consumes an argument). */
{"--recursive", "-r", OPT_NOOP, 0},
{"--update", "-u", OPT_FLAG, offsetof(Config, update)},
{"--old-args", NULL, OPT_FLAG, offsetof(Config, old_args)},
/* rsync's --old-args: accepted for CLI compatibility as a documented no-op
* (the remote server path is always safely quoted; see usage.c). It is
* recognized but stores no Config field. */
{"--old-args", NULL, OPT_NOOP, 0},
{"--rsh", "-e", OPT_STRING, offsetof(Config, rsh_command)},
{"--blocking-io", NULL, OPT_FLAG, offsetof(Config, blocking_io)},
{"--links", "-l", OPT_FLAG, offsetof(Config, follow_symlinks)},
@@ -1196,12 +1199,12 @@ static int apply_negation(Config* config, const char* arg) {
config->preserve_times = false;
config->preserve_owner = false;
config->preserve_group = false;
config->metadata_explicitly_disabled = true;
config->cli.metadata_explicitly_disabled = true;
/* --no-preserve is an explicit opt-out of the whole bundle: record it so
* the --incremental/--delta auto-preserve in cli_finalize_config does not
* silently re-enable perms/times. */
config->preserve_perms_explicit_off = true;
config->preserve_times_explicit_off = true;
config->cli.preserve_perms_explicit_off = true;
config->cli.preserve_times_explicit_off = true;
return 0;
}
*(bool*)((char*)config + entry->offset) = false;
@@ -1209,9 +1212,9 @@ static int apply_negation(Config* config, const char* arg) {
* auto-preserve the OTHER attribute without undoing this one. A later
* -p/-t sets the attribute directly; this flag only gates the implication. */
if (entry->offset == offsetof(Config, preserve_perms))
config->preserve_perms_explicit_off = true;
config->cli.preserve_perms_explicit_off = true;
else if (entry->offset == offsetof(Config, preserve_times))
config->preserve_times_explicit_off = true;
config->cli.preserve_times_explicit_off = true;
return 0;
}
@@ -1440,7 +1443,7 @@ static bool cli_handle_range_time_options(CliParseCtx* ctx) {
ctx->exit_code = -1;
return true;
}
config->stop_at_set = true;
config->cli.stop_at_set = true;
return true;
}
if (strcmp(arg, "--stop-at") == 0) {
@@ -1455,7 +1458,7 @@ static bool cli_handle_range_time_options(CliParseCtx* ctx) {
ctx->exit_code = -1;
return true;
}
config->stop_at_set = true;
config->cli.stop_at_set = true;
return true;
}
const char* threads_prefix = "--compress-threads=";
@@ -1526,7 +1529,7 @@ static bool cli_handle_table_option(CliParseCtx* ctx) {
return true;
}
if (entry->offset == offsetof(Config, compression_level))
config->compression_level_set = true;
config->cli.compression_level_set = true;
if (entry->offset == offsetof(Config, chmod_spec)) {
mode_t ignored;
if (!chmod_apply(0, config->chmod_spec, &ignored)) {
@@ -1539,7 +1542,7 @@ static bool cli_handle_table_option(CliParseCtx* ctx) {
defaults to 127.0.0.1, so a value check cannot distinguish it). Used
by --dry-run to route an explicit remote target to the server. */
if (entry->offset == offsetof(Config, server_host))
config->server_host_set = true;
config->cli.server_host_set = true;
}
} else if (apply_table_option(config, entry, NULL) != 0) {
ctx->exit_code = -1;
@@ -1813,7 +1816,7 @@ static bool cli_handle_transfer_flags(CliParseCtx* ctx) {
return true;
}
config->compression_level = (int)level;
config->compression_level_set = true;
config->cli.compression_level_set = true;
log_info_message(LOG_INFO_MISC, "Set Compression level to %ld", level);
ctx->i++;
}
@@ -1877,7 +1880,7 @@ static int set_server_port_option(Config* config, const char* value, const char*
return -1;
}
config->server_port = port;
config->server_port_set = true;
config->cli.server_port_set = true;
return 0;
}
@@ -2648,7 +2651,7 @@ static int cli_finalize_config(Config* config, bool verbose, bool no_delta, bool
int resolved = compression_choice_resolve();
if (resolved < 0) {
log_message(LOG_LEVEL_ERROR, "RSYNC_COMPRESS_LIST names no supported compression algorithm");
config->cli_exit_code = 4;
config->cli.cli_exit_code = 4;
return -1;
}
config->compression_algo = resolved;
@@ -2659,7 +2662,7 @@ static int cli_finalize_config(Config* config, bool verbose, bool no_delta, bool
* clamped to the codec's range, otherwise the codec's own default is used. */
if (config->use_compression) {
CompressionAlgo algo = (CompressionAlgo)config->compression_algo;
config->compression_level = config->compression_level_set
config->compression_level = config->cli.compression_level_set
? compression_clamp_level(algo, config->compression_level)
: compression_default_level(algo);
log_debug_message(LOG_DEBUG_UTIL, "Client compression: %s (level %d)",
@@ -2668,22 +2671,22 @@ static int cli_finalize_config(Config* config, bool verbose, bool no_delta, bool
/* The negotiated checksum is always resolved (rsync negotiates one for the
* delta strong sum even without --checksum): RSYNC_CHECKSUM_LIST first, then
* the compiled-in order. An explicit --checksum-choice already set it. */
if (!config->checksum_choice_set) {
if (!config->cli.checksum_choice_set) {
int resolved = checksum_choice_resolve();
if (resolved < 0) {
log_message(LOG_LEVEL_ERROR, "RSYNC_CHECKSUM_LIST names no supported checksum algorithm");
config->cli_exit_code = 4;
config->cli.cli_exit_code = 4;
return -1;
}
config->checksum_algo = resolved;
config->checksum_transfer_algo = resolved;
config->cli.checksum_transfer_algo = resolved;
}
/* rsync parity: "none" as the pre-transfer checksum cannot be combined with
* --checksum (exit 4). The check runs here because --checksum may appear on
* either side of --checksum-choice. */
if (config->checksum && config->checksum_algo == (int)CHECKSUM_ALGO_NONE) {
log_message(LOG_LEVEL_ERROR, "Invalid checksum-choice for --checksum: none");
config->cli_exit_code = 4;
config->cli.cli_exit_code = 4;
return -1;
}
@@ -2762,11 +2765,11 @@ static int cli_finalize_config(Config* config, bool verbose, bool no_delta, bool
* explicitly negated them (--no-perms/--no-times/--no-preserve). This runs
* BEFORE the derived use_metadata bit so the transport frame is still sent
* for the incremental/delta handshake even when both attributes were negated
* via --no-preserve (metadata_explicitly_disabled handles that opt-out). */
if (preserve_implied && !config->metadata_explicitly_disabled) {
if (!config->preserve_perms_explicit_off)
* via --no-preserve (cli.metadata_explicitly_disabled handles that opt-out). */
if (preserve_implied && !config->cli.metadata_explicitly_disabled) {
if (!config->cli.preserve_perms_explicit_off)
config->preserve_perms = true;
if (!config->preserve_times_explicit_off)
if (!config->cli.preserve_times_explicit_off)
config->preserve_times = true;
}
@@ -3153,7 +3156,7 @@ int main(int argc, char* argv[]) {
int parse_ret = parse_args(config, argc, argv, positional_args, &positional_count);
if (parse_ret != 0) {
if (parse_ret < 0)
exit_code = config->cli_exit_code ? config->cli_exit_code : 1;
exit_code = config->cli.cli_exit_code ? config->cli.cli_exit_code : 1;
goto cleanup;
}
+1 -1
View File
@@ -31,7 +31,7 @@ bool dry_run_targets_server(const Config* config) {
return true;
if (config->module && config->module[0] != '\0')
return true;
if (config->server_host_set || config->server_port_set)
if (config->cli.server_host_set || config->cli.server_port_set)
return true;
if (config->use_tls)
return true;
+2 -2
View File
@@ -1578,7 +1578,7 @@ static bool send_files_run(Config* config, SendFilesState* state) {
now_mono.tv_nsec = 0;
}
state->stop = stop_condition_make(config->stop_after_mins > 0, config->stop_after_mins,
config->stop_at_set, config->stop_at, now_mono);
config->cli.stop_at_set, config->stop_at, now_mono);
state->prepared.options.stop_condition = &state->stop;
/* The early-delete pre-scan above already ran; only the data pass should feed
the directory-time list (otherwise every directory would be captured
@@ -1916,7 +1916,7 @@ int send_files_multithreaded(Config* config) {
now_mono.tv_nsec = 0;
}
context->stop_condition =
stop_condition_make(config->stop_after_mins > 0, config->stop_after_mins, config->stop_at_set,
stop_condition_make(config->stop_after_mins > 0, config->stop_after_mins, config->cli.stop_at_set,
config->stop_at, now_mono);
bool collect_excluded = config->use_delete && !config->delete_excluded;
unsigned long long pre_scan_non_dir = 0;
+11 -12
View File
@@ -20,9 +20,9 @@
static void config_set_defaults(Config* config) {
config->scanner_threads = 0;
config->metadata_explicitly_disabled = false;
config->preserve_perms_explicit_off = false;
config->preserve_times_explicit_off = false;
config->cli.preserve_perms_explicit_off = false;
config->cli.preserve_times_explicit_off = false;
config->cli.metadata_explicitly_disabled = false;
config->show_progress = false;
config->compression_threads = 0;
config->ssh_port = 22;
@@ -44,8 +44,8 @@ static void config_set_defaults(Config* config) {
config->tls_ca = NULL;
config->server_host = str_dup("127.0.0.1");
config->server_port = 8080;
config->server_port_set = false;
config->server_host_set = false;
config->cli.server_port_set = false;
config->cli.server_host_set = false;
/* rsync defaults: --timeout=0 (I/O timeouts disabled) and --contimeout=60.
* A value of 0 disables the client's own deadline on both the socket layer
* (tcp_set_timeouts) and the protocol layer
@@ -68,10 +68,10 @@ static void config_set_defaults(Config* config) {
config->human_readable = false;
config->ignore_errors = false;
config->ignore_missing_args = false;
config->checksum_transfer_algo = CHECKSUM_ALGO_DEFAULT;
config->cli_exit_code = 0;
config->compression_level_set = false;
config->checksum_choice_set = false;
config->cli.checksum_transfer_algo = CHECKSUM_ALGO_DEFAULT;
config->cli.cli_exit_code = 0;
config->cli.compression_level_set = false;
config->cli.checksum_choice_set = false;
config->filters = NULL;
config->files_from = NULL;
config->files_from_set = NULL;
@@ -85,7 +85,6 @@ static void config_set_defaults(Config* config) {
config->rsh_command = NULL;
config->blocking_io = false;
config->outbuf = OUTBUF_BLOCK;
config->old_args = false;
config->remote_options = NULL;
config->remote_option_count = 0;
config->address = NULL;
@@ -101,7 +100,7 @@ static void config_set_defaults(Config* config) {
config->trust_sender = false;
config->stop_after_mins = 0;
config->stop_at = 0;
config->stop_at_set = false;
config->cli.stop_at_set = false;
config->write_batch = NULL;
config->only_write_batch = NULL;
config->read_batch = NULL;
@@ -342,7 +341,7 @@ bool config_derived_use_metadata(const Config* config) {
config->chown_uid_set || config->chown_gid_set || config->usermap_count > 0 ||
config->groupmap_count > 0 || config->update)
return true;
return (config->use_incremental || config->use_delta) && !config->metadata_explicitly_disabled;
return (config->use_incremental || config->use_delta) && !config->cli.metadata_explicitly_disabled;
}
bool config_has_basis(const Config* config) {
+48 -40
View File
@@ -342,22 +342,60 @@ typedef enum SuperMode { SUPER_MODE_AUTO = 0, SUPER_MODE_ON = 1, SUPER_MODE_OFF
CONFIG_WIRE_CODEC_FIELDS(X) \
CONFIG_WIRE_PROTECT_FIELDS(X)
/* Client-only, CLI-parse bookkeeping (never serialized). These members exist
* only so the client command-line parser can record HOW an option was
* specified (explicitly set, explicitly negated, or a parser-requested exit
* code); no other module and no wire peer ever needs them. Grouping them in
* one nested member keeps the public Config free of client-CLI-only state. */
typedef struct {
/* Set when the user explicitly turned an attribute off with --no-perms /
* --no-times (long or short form). --incremental/--delta historically
* auto-enabled mode and mtime preservation; these flags let
* cli_finalize_config restore that behavior while still honoring the
* explicit per-attribute negation. A later -p/-t re-enables the attribute
* directly, so the flag only prevents the incremental/delta implication,
* never a POSITIVE request. */
bool preserve_perms_explicit_off;
bool preserve_times_explicit_off;
/* Set by --no-preserve, the explicit opt-out of the whole preservation
* bundle, so the --incremental/--delta auto-preserve implication stays off. */
bool metadata_explicitly_disabled;
/* True when --server-port/--port was explicitly given. --dry-run uses it to
* decide whether a real server handshake was requested, so a plain local
* destination (no explicit port) keeps the existing client-side dry-run
* behavior instead of dialing the default 127.0.0.1:8080. */
bool server_port_set;
/* True when --server-host was explicitly given, and distinct from the
* "127.0.0.1" default: --dry-run uses it to route an explicit remote target
* to the server so it reports receiver state exactly like a real run,
* instead of silently running the client-side manifest. */
bool server_host_set;
/* Codec-negotiation CLI state. The effective pre-transfer checksum is
* Config->checksum_algo (serialized); checksum_transfer_algo is the rsync
* "transfer" half of a two-name --checksum-choice form (validated and used
* only to mirror rsync's whole-file forcing, since FastSync's per-block
* strong hash is fixed). cli_exit_code carries a parser-requested process
* exit status (rsync uses 4 for an unsupported checksum/compress algorithm)
* so main() can mirror it. */
int checksum_transfer_algo;
int cli_exit_code;
/* "The user explicitly chose" bits. They let the per-codec default level /
* checksum list be applied only when the corresponding rsync option was
* omitted (an explicit --compress-level / --checksum-choice always wins). */
bool compression_level_set;
bool checksum_choice_set;
/* True when --stop-at was given. */
bool stop_at_set;
} ConfigCliParse;
typedef struct Config {
/* -j/--threads=N: number of parallel scanner worker threads for the -m
* pipeline. 0 (the default, also set by bare -j/--threads) means "use the
* scanner's built-in default" (4). CLIENT-ONLY: it is a local scheduling
* concern and is NEVER serialized into the wire config frame. */
int scanner_threads;
bool metadata_explicitly_disabled;
/* CLIENT-ONLY (never serialized; not in CONFIG_WIRE_FIELDS). Set when the
* user explicitly turned an attribute off with --no-perms / --no-times (long
* or short form). --incremental/--delta historically auto-enabled mode and
* mtime preservation; these flags let cli_finalize_config restore that
* behavior while still honoring the explicit per-attribute negation. A
* later -p/-t re-enables the attribute directly, so the flag only prevents
* the incremental/delta implication, never a POSITIVE request. */
bool preserve_perms_explicit_off;
bool preserve_times_explicit_off;
/* Client-only CLI-parse bookkeeping (never serialized). See ConfigCliParse. */
ConfigCliParse cli;
bool show_progress;
int compression_threads;
int ssh_port;
@@ -378,18 +416,6 @@ typedef struct Config {
bool use_tls;
char* server_host;
int server_port;
/* True when --server-port/--port was explicitly given. CLIENT-ONLY (never
* serialized): --dry-run uses it to decide whether a real server handshake
* was requested, so a plain local destination (no explicit port) keeps the
* existing client-side dry-run behavior instead of dialing the default
* 127.0.0.1:8080. */
bool server_port_set;
/* True when --server-host was explicitly given. CLIENT-ONLY (never
* serialized), and distinct from the "127.0.0.1" default: --dry-run uses it
* to route an explicit remote target to the server so it reports receiver
* state exactly like a real run, instead of silently running the client-side
* manifest. */
bool server_host_set;
char* tls_cert;
char* tls_key;
char* tls_ca;
@@ -435,22 +461,6 @@ typedef struct Config {
* enters the keep-set. Implied by --delete-missing-args. */
bool ignore_missing_args;
/* Codec-negotiation CLI state (all client-only, never serialized). The
* effective pre-transfer checksum is Config->checksum_algo (serialized);
* checksum_transfer_algo is the rsync "transfer" half of a two-name
* --checksum-choice form (validated and used only to mirror rsync's
* whole-file forcing, since FastSync's per-block strong hash is fixed).
* cli_exit_code carries a parser-requested process exit status (rsync uses 4
* for an unsupported checksum/compress algorithm) so main() can mirror it. */
int checksum_transfer_algo;
int cli_exit_code;
/* Client-only "the user explicitly chose" bits. They let the per-codec
* default level / checksum list be applied only when the corresponding
* rsync option was omitted (an explicit --compress-level / --checksum-choice
* always wins). Never serialized. */
bool compression_level_set;
bool checksum_choice_set;
// Issue #129: Advanced file selection. These fields are CLIENT-ONLY: they are
// never serialized to the wire (the receiver must not learn them).
ArrayList* filters; /* --filter=RULE rule strings, in order */
@@ -486,7 +496,6 @@ typedef struct Config {
/* --outbuf mode (OutbufMode): stdout/stderr buffering. Client-only launch
* concern: NEVER crosses the wire. */
int outbuf;
bool old_args;
/* --remote-option=OPT (Phase 5, long form only): one or more extra command-line
* options to append to the REMOTE server invocation over SSH. CLIENT-ONLY:
* they are composed into the remote command line by ssh_build_remote_command()
@@ -556,7 +565,6 @@ typedef struct Config {
* process and are NEVER serialized into the config frame. */
int stop_after_mins; /* --stop-after=MINS minutes; 0 when unset */
time_t stop_at; /* --stop-at=... absolute wall-clock deadline */
bool stop_at_set; /* true when --stop-at was given */
/* Client-only residual-batch paths. A residual batch is a self-contained
* single-file record of the whole source tree (full file images using the
+1 -1
View File
@@ -195,7 +195,7 @@ static void test_format_C_padding_uses_transfer_algo() {
{CHECKSUM_ALGO_NONE, 2},
};
for (size_t i = 0; i < sizeof(cases) / sizeof(cases[0]); i++) {
config->checksum_transfer_algo = cases[i].algo;
config->cli.checksum_transfer_algo = cases[i].algo;
char expected[64];
size_t n = 0;
expected[n++] = '[';
+24 -21
View File
@@ -730,7 +730,7 @@ static void test_parse_args_port_alias() {
EXPECT_EQ_INT(cfg->server_port, 9000);
/* The default port is 8080; the explicit bit is what lets --dry-run tell an
explicit remote target from the default and route to the server. */
EXPECT_TRUE(cfg->server_port_set);
EXPECT_TRUE(cfg->cli.server_port_set);
config_delete(cfg);
cfg = config_create();
@@ -738,7 +738,7 @@ static void test_parse_args_port_alias() {
positional_count = 0;
EXPECT_EQ_INT(parse_args(cfg, 4, argv_inline, positional_args, &positional_count), 0);
EXPECT_EQ_INT(cfg->server_port, 9001);
EXPECT_TRUE(cfg->server_port_set);
EXPECT_TRUE(cfg->cli.server_port_set);
config_delete(cfg);
cfg = config_create();
@@ -746,7 +746,7 @@ static void test_parse_args_port_alias() {
positional_count = 0;
EXPECT_EQ_INT(parse_args(cfg, 4, argv_long, positional_args, &positional_count), 0);
EXPECT_EQ_INT(cfg->server_port, 9002);
EXPECT_TRUE(cfg->server_port_set);
EXPECT_TRUE(cfg->cli.server_port_set);
config_delete(cfg);
}
@@ -757,18 +757,18 @@ static void test_parse_args_server_host_sets_routing_bit() {
Config* cfg = config_create();
int positional_args[2];
int positional_count = 0;
EXPECT_FALSE(cfg->server_host_set);
EXPECT_FALSE(cfg->cli.server_host_set);
char* argv_space[] = {"fastsync", "--server-host", "example.test", "/src", "/dst"};
EXPECT_EQ_INT(parse_args(cfg, 5, argv_space, positional_args, &positional_count), 0);
EXPECT_EQ_STR(cfg->server_host, "example.test");
EXPECT_TRUE(cfg->server_host_set);
EXPECT_TRUE(cfg->cli.server_host_set);
config_delete(cfg);
cfg = config_create();
char* argv_inline[] = {"fastsync", "--server-host=example.test", "/src", "/dst"};
positional_count = 0;
EXPECT_EQ_INT(parse_args(cfg, 4, argv_inline, positional_args, &positional_count), 0);
EXPECT_TRUE(cfg->server_host_set);
EXPECT_TRUE(cfg->cli.server_host_set);
config_delete(cfg);
}
@@ -1726,7 +1726,7 @@ static void test_parse_args_no_preserve_blocks_implicit_metadata() {
EXPECT_EQ_INT(parse_args(cfg, 5, argv, positional_args, &positional_count), 0);
EXPECT_FALSE(cfg->use_metadata);
EXPECT_TRUE(cfg->metadata_explicitly_disabled);
EXPECT_TRUE(cfg->cli.metadata_explicitly_disabled);
config_delete(cfg);
}
}
@@ -1777,7 +1777,7 @@ static void test_parse_args_checksum_choice_rejects_unsupported() {
int positional_args[2];
int positional_count = 0;
EXPECT_EQ_INT(parse_args(cfg, 5, argv, positional_args, &positional_count), -1);
EXPECT_EQ_INT(cfg->cli_exit_code, 4);
EXPECT_EQ_INT(cfg->cli.cli_exit_code, 4);
config_delete(cfg);
}
}
@@ -1817,7 +1817,7 @@ static void test_parse_args_checksum_choice_new_algos() {
positional_count = 0;
EXPECT_EQ_INT(parse_args(cfg, 5, argv4, positional_args, &positional_count), 0);
EXPECT_EQ_INT(cfg->checksum_algo, single[i]);
EXPECT_EQ_INT(cfg->checksum_transfer_algo, single[i]);
EXPECT_EQ_INT(cfg->cli.checksum_transfer_algo, single[i]);
config_delete(cfg);
}
@@ -1827,7 +1827,7 @@ static void test_parse_args_checksum_choice_new_algos() {
char* argv5[] = {"fastsync", "--cc=sha1,md4", "/checksum/src", "/dst"};
positional_count = 0;
EXPECT_EQ_INT(parse_args(cfg, 4, argv5, positional_args, &positional_count), 0);
EXPECT_EQ_INT(cfg->checksum_transfer_algo, (int)CHECKSUM_ALGO_SHA1);
EXPECT_EQ_INT(cfg->cli.checksum_transfer_algo, (int)CHECKSUM_ALGO_SHA1);
EXPECT_EQ_INT(cfg->checksum_algo, (int)CHECKSUM_ALGO_MD4);
config_delete(cfg);
@@ -1849,14 +1849,14 @@ static void test_parse_args_checksum_none_with_checksum_rejected() {
int positional_args[2];
int positional_count = 0;
EXPECT_EQ_INT(parse_args(cfg, 5, argv, positional_args, &positional_count), -1);
EXPECT_EQ_INT(cfg->cli_exit_code, 4);
EXPECT_EQ_INT(cfg->cli.cli_exit_code, 4);
config_delete(cfg);
cfg = config_create();
char* argv2[] = {"fastsync", "--checksum", "--cc=md5,none", "/checksum/src", "/dst"};
positional_count = 0;
EXPECT_EQ_INT(parse_args(cfg, 5, argv2, positional_args, &positional_count), -1);
EXPECT_EQ_INT(cfg->cli_exit_code, 4);
EXPECT_EQ_INT(cfg->cli.cli_exit_code, 4);
config_delete(cfg);
/* "none" as the TRANSFER checksum with a real pre-transfer checksum is
@@ -1958,7 +1958,7 @@ static void test_parse_args_compress_choice_parity() {
int positional_args[2];
int positional_count = 0;
EXPECT_EQ_INT(parse_args(cfg, 5, argv, positional_args, &positional_count), -1);
EXPECT_EQ_INT(cfg->cli_exit_code, 4);
EXPECT_EQ_INT(cfg->cli.cli_exit_code, 4);
config_delete(cfg);
}
}
@@ -2078,6 +2078,9 @@ static void test_parse_args_temp_dir() {
config_delete(cfg);
}
/* --old-args is accepted for rsync CLI compatibility as a documented no-op (the
* remote server path is always safely quoted); it stores no Config field, so
* parsing it must simply succeed and leave the positional arguments intact. */
static void test_parse_args_old_args() {
Config* cfg = config_create();
char* argv[] = {"fastsync", "--old-args", "/src", "/dst"};
@@ -2085,7 +2088,7 @@ static void test_parse_args_old_args() {
int positional_count = 0;
EXPECT_EQ_INT(parse_args(cfg, 4, argv, positional_args, &positional_count), 0);
EXPECT_TRUE(cfg->old_args);
EXPECT_EQ_INT(positional_count, 2);
config_delete(cfg);
}
@@ -2719,7 +2722,7 @@ static void test_parse_args_compression_env_list() {
cfg = config_create();
positional_count = 0;
EXPECT_EQ_INT(parse_args(cfg, 4, argv, positional_args, &positional_count), -1);
EXPECT_EQ_INT(cfg->cli_exit_code, 4);
EXPECT_EQ_INT(cfg->cli.cli_exit_code, 4);
config_delete(cfg);
unsetenv("RSYNC_COMPRESS_LIST");
}
@@ -2734,7 +2737,7 @@ static void test_parse_args_checksum_env_list() {
setenv("RSYNC_CHECKSUM_LIST", "md5", 1);
EXPECT_EQ_INT(parse_args(cfg, 4, argv, positional_args, &positional_count), 0);
EXPECT_EQ_INT(cfg->checksum_algo, (int)CHECKSUM_ALGO_MD5);
EXPECT_EQ_INT(cfg->checksum_transfer_algo, (int)CHECKSUM_ALGO_MD5);
EXPECT_EQ_INT(cfg->cli.checksum_transfer_algo, (int)CHECKSUM_ALGO_MD5);
config_delete(cfg);
/* An explicit --cc wins. */
@@ -2750,7 +2753,7 @@ static void test_parse_args_checksum_env_list() {
cfg = config_create();
positional_count = 0;
EXPECT_EQ_INT(parse_args(cfg, 4, argv, positional_args, &positional_count), -1);
EXPECT_EQ_INT(cfg->cli_exit_code, 4);
EXPECT_EQ_INT(cfg->cli.cli_exit_code, 4);
config_delete(cfg);
unsetenv("RSYNC_CHECKSUM_LIST");
}
@@ -4385,7 +4388,7 @@ static void test_parse_args_preserve_long_form() {
}
/* --no-perms/--no-times/--no-owner/--no-group (long and short) clear only
* their own attribute bit; they never set metadata_explicitly_disabled. */
* their own attribute bit; they never set cli.metadata_explicitly_disabled. */
static void test_parse_args_preserve_negations() {
struct {
const char* arg;
@@ -4413,7 +4416,7 @@ static void test_parse_args_preserve_negations() {
bool expected = all[j] != cases[i].offset;
EXPECT_TRUE(*(bool*)((char*)cfg + all[j]) == expected);
}
EXPECT_FALSE(cfg->metadata_explicitly_disabled);
EXPECT_FALSE(cfg->cli.metadata_explicitly_disabled);
/* -a's devices/specials keep the metadata frame on. */
EXPECT_TRUE(cfg->use_metadata);
config_delete(cfg);
@@ -4456,7 +4459,7 @@ static void test_parse_args_no_preserve_disables_bundle() {
EXPECT_FALSE(cfg->preserve_times);
EXPECT_FALSE(cfg->preserve_owner);
EXPECT_FALSE(cfg->preserve_group);
EXPECT_TRUE(cfg->metadata_explicitly_disabled);
EXPECT_TRUE(cfg->cli.metadata_explicitly_disabled);
EXPECT_TRUE(cfg->use_incremental);
EXPECT_FALSE(cfg->use_metadata);
config_delete(cfg);
@@ -4509,7 +4512,7 @@ static void test_parse_args_incremental_implies_preserve() {
EXPECT_EQ_INT(parse_args(cfg, 5, argv4, positional_args, &positional_count), 0);
EXPECT_FALSE(cfg->preserve_perms);
EXPECT_FALSE(cfg->preserve_times);
EXPECT_TRUE(cfg->metadata_explicitly_disabled);
EXPECT_TRUE(cfg->cli.metadata_explicitly_disabled);
EXPECT_FALSE(cfg->use_metadata);
config_delete(cfg);
}
+4 -4
View File
@@ -2533,15 +2533,15 @@ static void test_config_derived_use_metadata() {
/* Incremental/delta imply metadata unless --no-preserve disabled it. */
c->use_incremental = true;
EXPECT_TRUE(config_derived_use_metadata(c));
c->metadata_explicitly_disabled = true;
c->cli.metadata_explicitly_disabled = true;
EXPECT_FALSE(config_derived_use_metadata(c));
c->metadata_explicitly_disabled = false;
c->cli.metadata_explicitly_disabled = false;
c->use_incremental = false;
c->use_delta = true;
EXPECT_TRUE(config_derived_use_metadata(c));
c->metadata_explicitly_disabled = true;
c->cli.metadata_explicitly_disabled = true;
EXPECT_FALSE(config_derived_use_metadata(c));
c->metadata_explicitly_disabled = false;
c->cli.metadata_explicitly_disabled = false;
c->use_delta = false;
/* Flags that must NOT imply metadata on their own. */