feat(identity): implement --copy-as USER[:GROUP] safe subset (P7 Wave E)

Force the receiver to apply the requested owner/group to every written
entry through the confined fd-relative identity path instead of switching
the process credentials (unsafe for the multithreaded receiver).  An
unprivileged receiver refuses the transfer up front in server_module_gate,
before STATUS_OK, so no data is written with the wrong ownership.

- new Config fields copy_as_set/copy_as_uid/copy_as_gid + defaults
- identity_parse_copy_as (name/@N/* resolution, primary-gid default,
  gid==uid fallback for numeric ids with no passwd entry); implies -M
- identity snapshot + highest-priority forcing in identity_resolve_targets
- identity_copy_as_refused() helper
- trailing config-frame block (presence int + two int32 ids, >=0 checked)
- PROTOCOL_VERSION 2.17.0 -> 2.18.0; version-sensitive tests updated
- unit tests for parse + wire round-trip/negative-id rejection
- integration TestCopyAs: unprivileged refusal + root chown assertion
- RSYNC_COMPAT.md --copy-as row updated (safe subset + divergence); README
  protocol version refreshed

RSYNC_COMPAT.md

@@ -264,7 +264,7 @@ why plain `--append` works on the normal atomic path, not only with `--inplace`.
 | `--usermap=STRING` | Map usernames | ✅ Implemented | Opt-in ownership application. rsync subset implemented: comma-separated `FROM:TO` rules evaluated in order, first match wins; `FROM`/`TO` are group/user names (resolved on the SOURCE machine at parse time), `*` (FROM matches any id / TO = the receiving process's current euid), and an `@N` or bare `N` numeric id. Rules are carried over the wire as resolved numeric id pairs; the receiver applies a matching rule (else falls back to `--chown`, `--numeric-ids`, then a best-effort name lookup) via an fd-relative `fchown`. Malformed/unresolvable specs are rejected with a clear error, never a silent no-op. Implies metadata preservation so the source uid/gid travel. Only effective when the receiver can actually change ownership (root or membership); otherwise it warns and continues |
 | `--groupmap=STRING` | Map group names | ✅ Implemented | Same rsync subset and semantics as `--usermap` but for the group (gid) side and the group databases. See the Phase-4 identity notes |
 | `--chown=USER:GROUP` | Map owner and group | ✅ Implemented | Opt-in ownership override applied receiver-side. Forms: `USER:GROUP`, `USER` (owner only), `:GROUP` (group only); a `*` for USER/GROUP means the current/root user or group as appropriate; an `@N`/bare `N` numeric id is accepted. A `:` inside a name may be escaped as `\:`. Equivalent to a trailing `*:*` usermap+groupmap rule (so an explicit `--usermap`/`--groupmap` match wins). Malformed or unresolvable specs are clear parse errors. Implies metadata preservation. Only effective when the receiver has permission to chown; otherwise it warns and continues (rsync parity) |
-| `--copy-as=USER[:GROUP]` | Perform the copy as another user/group | ❌ Not Implemented | |
+| `--copy-as=USER[:GROUP]` | Perform the copy as another user/group | ✅ Implemented | Safe-subset implementation, an explicit divergence from rsync's **real identity switching**. rsync makes the receiving process actually assume USER/GROUP (setuid/setgid); FastSync's receiver is multithreaded, so a real credential drop would be unsafe and is never attempted — FastSync never calls `setuid`/`seteuid`/`setgid`. Instead the receiver FORCES the ownership of every entry it writes to `copy_as_uid`/`copy_as_gid` through the existing confined, fd-relative identity path (the same `fchown`/`fchownat` mechanism as `--chown`/`--usermap`/`--groupmap`; symlinks use `fchownat(..., AT_SYMLINK_NOFOLLOW)`), with `--copy-as` at the **highest priority** — it beats usermap/groupmap/`--chown`/`--numeric-ids` and the best-effort name lookup. This REQUIRES a privileged (root) receiver: an unprivileged receiver REFUSES the whole transfer up front at the config handshake (`server_module_gate`, running inside `config_receive_with_validate` before the `STATUS_OK` ack) with a clear error and no file data exchanged — never a silent wrong-ownership result. USER is resolved on the client against the user database (a name, an `@N`/bare `N` numeric id, or `*` meaning the client's current euid); when `:GROUP` is present it is resolved against the group database (`*` meaning the client's egid). **Group-default rule:** when the group is omitted FastSync uses the user's primary gid (`getpwuid(uid)->pw_gid`); a numeric id with no local passwd entry has no primary gid to look up, so `gid` falls back to `uid` (documented divergence). Malformed/empty/unresolvable specs are clear parse errors, never a silent no-op. Never elevates privileges and never bypasses the confined receive root. Implies metadata preservation (the source uid/gid must be transmitted). Wire: a new trailing config-frame block (presence int, then the two int32 ids, both validated `>= 0` on receive); `PROTOCOL_VERSION` bumped **2.17.0 → 2.18.0** |
 
 **Phase-4 metadata-time notes:** `-U/--atimes`, `-N/--crtimes`,
 `-O/--omit-dir-times`, `-J/--omit-link-times`, and `--open-noatime` are new.
@@ -675,7 +675,7 @@ now transmits targets (the prior behavior was broken/partial); its status moved
 | `--stop-after=MINS` | Stop after N minutes | ✅ Implemented | Client-only sender stop deadline (Phase 6): computing `--stop-after=MINS` (a positive minute count; 0/negative/garbage rejected) and `--stop-at=TIME` (`HH:MM`, `HH:MM:SS`, or `now+N[smhd]`; a past time stops immediately). The transfer stops ELEGANTLY at the next chunk boundary: everything already fully sent is kept and applied, the run returns 0, and --delete (late/delete-after timing) does NOT wipe the destination — when the scan is cut short the partial keep-set manifest is suppressed with a warning (the delete walk is skipped rather than acting on an incomplete keep-set, so unscanned source mirrors survive). `--delete-before`/`--delete-during` still run their complete pre-scan (which ignores the deadline). Local client-only fields: never serialized into the wire config frame, so no PROTOCOL_VERSION bump. `--stop-after` uses CLOCK_MONOTONIC; `--stop-at` uses the wall clock. Works single-threaded and under `-j`/`--threads` (multithreaded). Divergence: rsync computes `--stop-after` from the run start; FastSync likewise. When both are given, the earlier of the two deadlines wins (checked per iteration). See the Phase-6 stop notes below |
 | `--stop-at=TIME` | Stop at specified time | ✅ Implemented | Same feature as `--stop-after` (deadline transfer stop), absolute wall-clock form (`HH:MM[:SS]` or `now+N[smhd]`). See the row above and the Phase-6 stop notes |
 | `--fsync` | Fsync every written file before publication | ✅ Implemented | |
-| `--protocol=NUM` | Force older protocol version | ✅ Implemented | Forces the wire protocol version for this transfer. FastSync has exactly ONE wire format (`PROTOCOL_VERSION`, currently 2.17.0) with no downgrade/backward-compat code paths, so `--protocol=2.17.0` is accepted (it sets the version claim the client sends, which the server already requires to match exactly) and **every other value is rejected up front** with a clear error before any connection — it does not and cannot speak an older or virtual wire format. Divergence from rsync (which negotiates a range and downgrades to an integer 0..31): FastSync's honest contract is force-to-the-one-supported-value; a genuine downgrade would require a per-version compatibility layer that does not exist. Client-only; the server-side exact-match check is unchanged. `--protocol=2.17`/`2.16.0`/`2.15.0`/`216`/`31`/garbage are all rejected. See the Phase-6 protocol note below |
+| `--protocol=NUM` | Force older protocol version | ✅ Implemented | Forces the wire protocol version for this transfer. FastSync has exactly ONE wire format (`PROTOCOL_VERSION`, currently 2.18.0) with no downgrade/backward-compat code paths, so `--protocol=2.18.0` is accepted (it sets the version claim the client sends, which the server already requires to match exactly) and **every other value is rejected up front** with a clear error before any connection — it does not and cannot speak an older or virtual wire format. Divergence from rsync (which negotiates a range and downgrades to an integer 0..31): FastSync's honest contract is force-to-the-one-supported-value; a genuine downgrade would require a per-version compatibility layer that does not exist. Client-only; the server-side exact-match check is unchanged. `--protocol=2.18`/`2.17.0`/`2.16.0`/`2.15.0`/`216`/`31`/garbage are all rejected. See the Phase-6 protocol note below |
 | `--iconv=CONVERT_SPEC` | Charset conversion | ✅ Implemented | Charset conversion of FILE NAMES (not content) at the protocol boundary via iconv(3): `--iconv=LOCAL[,REMOTE]` — the sender converts each local filename LOCAL→REMOTE before transmitting, and the receiver converts each wire filename REMOTE→LOCAL before creating/writing. The full CONVERT_SPEC is serialized into the config frame as a new trailing string field so the peer knows the wire charset; **PROTOCOL_VERSION bumped 2.15.0 → 2.16.0**. `LOCAL[,REMOTE]` parse: single charset ⇒ LOCAL==REMOTE (identity both ways); garbage rejected up front. Validation probes BOTH directions (a spec that only opens one way is refused, as is a NUL-emitting target charset like utf-16/utf-32/ucs-2, since filenames cannot contain NUL). An unrepresentable name (EILSEQ/EINVAL) fails that path cleanly with a logged `--iconv: cannot convert file name ...` and is never written mangled/truncated. Conversion is applied at EVERY wire-path site (regular/MKDIR/hardlink path+target/symlink path+target/SPECIAL, the delete manifest, the incremental-check path, and the `-s`/`chunk_serialize` embedded blob path), on both client and server (`--iconv` is also a server/daemon option). Zero overhead when unset. See the Phase-6 iconv notes below |
 | `--checksum-seed=NUM` | Set checksum seed | ✅ Implemented | Sets the seed for FastSync's whole-file xxHash64 digest (full 64-bit seed) and for the delta path's per-block xxHash32 strong checksum (low 32 bits of the seed). An explicit seed deterministically changes every computed digest on BOTH endpoints (sender and receiver share the seed via the config frame, protocol 2.10.0), so identical runs with the same seed skip the same files and a changed seed changes the digests — the explicit-seed path that makes xxHash comparisons deterministic. `--checksum-choice=md5` has no seed and ignores it (documented). The value is a strict decimal 0..2⁶⁴-1 (blank, signed, or non-numeric values are rejected). Like rsync, a seed only matters where a digest is actually computed (`--checksum` or a basis-dir run, or a delta transfer); it does not by itself enable `--checksum`/`--delta`. Divergence from rsync: the default is seed 0, and FastSync never randomizes the seed (rsync uses a random per-transfer seed when `--checksum-seed` is unset); FastSync's unset default therefore reproduces its historical byte-for-byte behavior |
 | `--secluded-args`, `-s` | Use protocol to send args | ⛔ Impossible/Divergence | Accepted for CLI compatibility (including the rsync short `-s`, Phase 7 Wave A) but a documented **no-op / divergence**. rsync's `-s` protects arguments from shell expansion by shipping them over the protocol; FastSync never passes remote arguments through a shell expansion boundary in the first place — its SSH transport builds the remote argv as **single-quote-escaped shell words** (`ssh_build_remote_command`), so the injection/leak that `-s` guards against does not exist and there is nothing to "seclude". Implementing a true arg-send protocol would mean replacing the argv-based SSH launch with an in-band argument channel, a large redesign of the transport that buys no security here. Chunk serialization remains the long-only `--chunk-serialization`. |
@@ -791,7 +791,7 @@ These are the hardest compatibility items because they require durable formats o
 
 **Phase 6, Wave B (iconv) shipping note (PROTOCOL 2.15.0 → 2.16.0):** `--iconv=LOCAL[,REMOTE]` converts file NAMES at the wire boundary (never content). The full CONVERT_SPEC is serialized into the config frame as a new trailing string field (empty→NULL canonicalized), so both ends share the same wire charset interpretation; this required the PROTOCOL bump because the frame is a strict ordered sequence and a peer that does not parse the new trailing field would desynchronize. Each end derives LOCAL (its own charset) and REMOTE (the wire charset): the sender opens LOCAL→REMOTE and converts every transmitted filename; the receiver opens REMOTE→LOCAL and converts every received filename before creating/writing. Conversion is applied at every wire-path site (regular/MKDIR/hardlink path+target/symlink path+target/SPECIAL, the delete manifest keep/protected/missing entries, the incremental-check path, and the embedded `-s`/chunk-blob path). A name it cannot convert (EILSEQ/EINVAL) is failed cleanly with a logged `--iconv: cannot convert file name ...` and is never written truncated/mangled. Validation probes both directions up front (both the sender local→remote and the receiver remote→local, and, for a server/daemon with its own `--iconv`, the client-REMOTE→server-LOCAL pair) so an unusable spec is rejected before the connection rather than mid-transfer, and NUL-emitting target charsets (utf-16/utf-32/ucs-2) are refused because filenames cannot contain NUL. Divergence documented upstream: the receiver does NOT half-swap; the wire charset always comes from the sender's REMOTE half, so a server whose local charset differs from the client's LOCAL must declare it with its own `--iconv`. Conversion is process-global and runs on a single thread per process (sender thread / receiver-loop thread), initialized before worker threads start and freed after they join.
 
-**Phase 6, Wave C (protocol-version) shipping note (no PROTOCOL_VERSION change):** `--protocol=NUM` lets the client force the wire protocol version for a transfer. FastSync's protocol is a single lockstep format: the config frame is a strict ordered sequence and the server requires the client's version string to equal `PROTOCOL_VERSION` exactly (`config_receive_with_validate`, src/shared/config.c) — there are no older-format code paths and no downgrade/negotiation machinery, so a lower/higher/virtual version can never be spoken. The honest contract is therefore: `--protocol=2.17.0` (the current `PROTOCOL_VERSION`, as of the P7 Wave D times bump) is accepted and stored into the client's `version` claim (which `config_send` already transmits), and every other value — `2.17`, `2.16.0`, `2.15.0`, `3.0.0`, rsync-integer spellings like `216`/`31`, garbage, empty — is rejected up front in `validate_config()` before any connection, with a clear error that FastSync supports only its current wire protocol and cannot speak an older or virtual one. Implementation is client-only: a server-side `--protocol` is intentionally not added because the server has no negotiation (it only enforces exact match), and it could only ever be the current version. This preserves (and slightly tightens) existing validation: the client now also refuses to launch with a version it cannot actually speak, rather than only the server rejecting it later. A genuine downgrade would require a per-version compatibility layer for every frame/feature added since (append 2.10, preallocate 2.11, hardlinks 2.12, devices/specials/symlink-trust/xattr 2.13, remote-option 2.14, daemon module/auth 2.15, iconv 2.16, dir/symlink times 2.17) and is intentionally out of scope — documented divergences from rsync's integer-negotiated downgrade remain.
+**Phase 6, Wave C (protocol-version) shipping note (no PROTOCOL_VERSION change):** `--protocol=NUM` lets the client force the wire protocol version for a transfer. FastSync's protocol is a single lockstep format: the config frame is a strict ordered sequence and the server requires the client's version string to equal `PROTOCOL_VERSION` exactly (`config_receive_with_validate`, src/shared/config.c) — there are no older-format code paths and no downgrade/negotiation machinery, so a lower/higher/virtual version can never be spoken. The honest contract is therefore: `--protocol=2.18.0` (the current `PROTOCOL_VERSION`, as of the P7 Wave E copy-as bump) is accepted and stored into the client's `version` claim (which `config_send` already transmits), and every other value — `2.18`, `2.17.0`, `2.16.0`, `2.15.0`, `3.0.0`, rsync-integer spellings like `216`/`31`, garbage, empty — is rejected up front in `validate_config()` before any connection, with a clear error that FastSync supports only its current wire protocol and cannot speak an older or virtual one. Implementation is client-only: a server-side `--protocol` is intentionally not added because the server has no negotiation (it only enforces exact match), and it could only ever be the current version. This preserves (and slightly tightens) existing validation: the client now also refuses to launch with a version it cannot actually speak, rather than only the server rejecting it later. A genuine downgrade would require a per-version compatibility layer for every frame/feature added since (append 2.10, preallocate 2.11, hardlinks 2.12, devices/specials/symlink-trust/xattr 2.13, remote-option 2.14, daemon module/auth 2.15, iconv 2.16, dir/symlink times 2.17, copy-as 2.18) and is intentionally out of scope — documented divergences from rsync's integer-negotiated downgrade remain.
 
 **Phase-1/2 selection-and-update status correction (docs):** `-I/--ignore-times`, `--size-only`, `-@/--modify-window`, `--existing`, `--ignore-existing`, `-u/--update`, `-W/--whole-file`, and `--compress-threads` were previously listed as not-implemented in this document but are in fact fully implemented and tested on `dev`. This pass corrects the matrix to match the code. The realistic model of these is that FastSync is a *sender-driven* whole-tree copy, so the size+mtime quick-check and all three receiver-policy skips (`--existing`, `--ignore-existing`, `-u`) are evaluated against the **destination** on the receiver side, and their booleans cross the wire in the config frame. `-I`/`--size-only`/`--modify-window` modify the `--incremental` per-file `STATUS_CHECK` handshake's match predicate (`-I` disables the mtime leg and forces transfer; `--size-only` drops only the mtime leg; `--modify-window` adds tolerance to `metadata_mtime_matches`); they require `--incremental` (or a basis dir) to have a handshake to affect, mirroring how they only matter where a quick-check exists in rsync. `--existing`/`--ignore-existing`/`-u` are receiver write-time policies (skipping the write / newer-destination guard) applied across the regular-file, `--delay-updates`-staged, hardlink-sibling, and special/device paths; `-u` implies `-M` metadata and uses a second-then-nanosecond strict `>` newer check; both correctly influence `--remove-source-files` (a skipped source is not removed). `-W/--whole-file` disables block-level delta (opt-in via `--delta`), folded into the wire `use_delta` so no protocol bump was needed, and makes `--fuzzy` inert; `--append`/`--append-verify` are rejected with `-W`. `--compress-threads=NUM` (1..64, client-only, never crosses the wire) sizes the zstd compression worker pool. No code was changed by this correction; the implementation had landed in earlier merge waves (feat/ignore-times, feat/ignore-existing via the newer `file_to_disk_secure_no_replace`/`linkat EEXIST` path, feat/size-only, feat/modify-window, feat/whole-file, feat/update, compression-threads).