Merge branch 'feat/w9-dryrun' into fix/w9-integration

CHANGELOG.md

@@ -6,6 +6,21 @@ run the same version because the handshake is strict.
 
 ## [Unreleased]
 
+### Added
+
+- **Server-contacting `--dry-run` (protocol 2.21.0).** `--dry-run` now performs
+  a real handshake with a remote/daemon receiver and reports exactly what WOULD
+  change based on receiver state (existing destination files, mtimes, checksums,
+  basis dirs). The wire config carries the dry-run intent (`Config.dry_run`) and
+  the receiver answers each per-file check with `STATUS_DRY_RUN_TRANSFER` (would
+  transfer) or `STATUS_OK` (already up to date); the sender prints the
+  would-transfer set and its trailer without sending any file data. The receiver
+  performs the normal read-only incremental decision but mutates nothing: no temp
+  files, writes, renames, deletes, metadata/xattr/chown, or directory creation.
+  A plain local destination (no explicit `--server-port`/remote) keeps the
+  original client-side dry-run. Would-delete reporting for `--delete*` is
+  deferred to a follow-up; dry-run never deletes.
+
 ### Security
 
 - Enforce the daemon's per-module `max connections` cap and add a global

RSYNC_COMPAT.md

@@ -93,7 +93,7 @@ This document maps rsync's full feature set to FastSync's current implementation
 
 | Flag | Rsync Description | FastSync Status | Notes |
 |------|-------------------|-----------------|-------|
-| `-n`, `--dry-run` | Trial run with no changes | ✅ Implemented | `dry_run` config field |
+| `-n`, `--dry-run` | Trial run with no changes | ✅ Implemented | Server-contacting since protocol 2.21.0. The final routing predicate is `dry_run_targets_server()` in `src/client/client_send.c`: any target a real run would reach over the wire selects the server-contacting path — an SSH transport, a daemon `host::module` destination, an explicit `--server-host` or `--server-port`/`--port`, TLS, or a source-bind `--address` — and the client handshakes with the receiver, which runs the normal read-only per-file check and answers `STATUS_DRY_RUN_TRANSFER`/`STATUS_OK` without mutating anything. A plain local destination (none of those) keeps the original client-side manifest that never dials the default `127.0.0.1:8080`. Would-delete reporting for `--delete*` is deferred (dry-run never deletes). |
 | `-b`, `--backup` | Make backups of overwritten files | ✅ Implemented | Backup before overwrite |
 | `--backup-dir=DIR` | Backup directory hierarchy | ✅ Implemented | `backup_dir` config field |
 | `--suffix=SUFFIX` | Backup suffix (default ~) | ✅ Implemented | `suffix` config field |
@@ -795,7 +795,7 @@ These are the hardest compatibility items because they require durable formats o
 
 **Phase 6, Wave B (iconv) shipping note (PROTOCOL 2.15.0 → 2.16.0):** `--iconv=LOCAL[,REMOTE]` converts file NAMES at the wire boundary (never content). The full CONVERT_SPEC is serialized into the config frame as a new trailing string field (empty→NULL canonicalized), so both ends share the same wire charset interpretation; this required the PROTOCOL bump because the frame is a strict ordered sequence and a peer that does not parse the new trailing field would desynchronize. Each end derives LOCAL (its own charset) and REMOTE (the wire charset): the sender opens LOCAL→REMOTE and converts every transmitted filename; the receiver opens REMOTE→LOCAL and converts every received filename before creating/writing. Conversion is applied at every wire-path site (regular/MKDIR/hardlink path+target/symlink path+target/SPECIAL, the delete manifest keep/protected/missing entries, the incremental-check path, and the embedded `-s`/chunk-blob path). A name it cannot convert (EILSEQ/EINVAL) is failed cleanly with a logged `--iconv: cannot convert file name ...` and is never written truncated/mangled. Validation probes both directions up front (both the sender local→remote and the receiver remote→local, and, for a server/daemon with its own `--iconv`, the client-REMOTE→server-LOCAL pair) so an unusable spec is rejected before the connection rather than mid-transfer, and NUL-emitting target charsets (utf-16/utf-32/ucs-2) are refused because filenames cannot contain NUL. Divergence documented upstream: the receiver does NOT half-swap; the wire charset always comes from the sender's REMOTE half, so a server whose local charset differs from the client's LOCAL must declare it with its own `--iconv`. Conversion is process-global and runs on a single thread per process (sender thread / receiver-loop thread), initialized before worker threads start and freed after they join.
 
-**Phase 6, Wave C (protocol-version) shipping note (no PROTOCOL_VERSION change):** `--protocol=NUM` lets the client force the wire protocol version for a transfer. FastSync's protocol is a single lockstep format: the config frame is a strict ordered sequence and the server requires the client's version string to equal `PROTOCOL_VERSION` exactly (`config_receive_with_validate`, src/shared/config.c) — there are no older-format code paths and no downgrade/negotiation machinery, so a lower/higher/virtual version can never be spoken. The honest contract is therefore: `--protocol=2.21.0` (the current `PROTOCOL_VERSION`, as of the error-detail wave) is accepted and stored into the client's `version` claim (which `config_send` already transmits), and every other value — `2.20.0`, `2.19.0`, `2.18.0`, `2.18`, `2.17.0`, `2.16.0`, `2.15.0`, `3.0.0`, rsync-integer spellings like `216`/`31`, garbage, empty — is rejected up front in `validate_config()` before any connection, with a clear error that FastSync supports only its current wire protocol and cannot speak an older or virtual one. Implementation is client-only: a server-side `--protocol` is intentionally not added because the server has no negotiation (it only enforces exact match), and it could only ever be the current version. This preserves (and slightly tightens) existing validation: the client now also refuses to launch with a version it cannot actually speak, rather than only the server rejecting it later. A genuine downgrade would require a per-version compatibility layer for every frame/feature added since (append 2.10, preallocate 2.11, hardlinks 2.12, devices/specials/symlink-trust/xattr 2.13, remote-option 2.14, daemon module/auth 2.15, iconv 2.16, dir/symlink times 2.17, privilege flags --super/--copy-as 2.18, SCRAM daemon auth 2.19, packed metadata 2.20) and is intentionally out of scope — documented divergences from rsync's integer-negotiated downgrade remain.
+**Phase 6, Wave C (protocol-version) shipping note (no PROTOCOL_VERSION change):** `--protocol=NUM` lets the client force the wire protocol version for a transfer. FastSync's protocol is a single lockstep format: the config frame is a strict ordered sequence and the server requires the client's version string to equal `PROTOCOL_VERSION` exactly (`config_receive_with_validate`, src/shared/config.c) — there are no older-format code paths and no downgrade/negotiation machinery, so a lower/higher/virtual version can never be spoken. The honest contract is therefore: `--protocol=2.21.0` (the current `PROTOCOL_VERSION`, as of the combined error-detail + server-contacting dry-run wave) is accepted and stored into the client's `version` claim (which `config_send` already transmits), and every other value — `2.20.0`, `2.19.0`, `2.18.0`, `2.18`, `2.17.0`, `2.16.0`, `2.15.0`, `3.0.0`, rsync-integer spellings like `216`/`31`, garbage, empty — is rejected up front in `validate_config()` before any connection, with a clear error that FastSync supports only its current wire protocol and cannot speak an older or virtual one. Implementation is client-only: a server-side `--protocol` is intentionally not added because the server has no negotiation (it only enforces exact match), and it could only ever be the current version. This preserves (and slightly tightens) existing validation: the client now also refuses to launch with a version it cannot actually speak, rather than only the server rejecting it later. A genuine downgrade would require a per-version compatibility layer for every frame/feature added since (append 2.10, preallocate 2.11, hardlinks 2.12, devices/specials/symlink-trust/xattr 2.13, remote-option 2.14, daemon module/auth 2.15, iconv 2.16, dir/symlink times 2.17, privilege flags --super/--copy-as 2.18, SCRAM daemon auth 2.19, packed metadata 2.20) and is intentionally out of scope — documented divergences from rsync's integer-negotiated downgrade remain.
 
 **Phase-1/2 selection-and-update status correction (docs):** `-I/--ignore-times`, `--size-only`, `-@/--modify-window`, `--existing`, `--ignore-existing`, `-u/--update`, `-W/--whole-file`, and `--compress-threads` were previously listed as not-implemented in this document but are in fact fully implemented and tested on `dev`. This pass corrects the matrix to match the code. The realistic model of these is that FastSync is a *sender-driven* whole-tree copy, so the size+mtime quick-check and all three receiver-policy skips (`--existing`, `--ignore-existing`, `-u`) are evaluated against the **destination** on the receiver side, and their booleans cross the wire in the config frame. `-I`/`--size-only`/`--modify-window` modify the `--incremental` per-file `STATUS_CHECK` handshake's match predicate (`-I` disables the mtime leg and forces transfer; `--size-only` drops only the mtime leg; `--modify-window` adds tolerance to `metadata_mtime_matches`); they require `--incremental` (or a basis dir) to have a handshake to affect, mirroring how they only matter where a quick-check exists in rsync. `--existing`/`--ignore-existing`/`-u` are receiver write-time policies (skipping the write / newer-destination guard) applied across the regular-file, `--delay-updates`-staged, hardlink-sibling, and special/device paths; `-u` implies `-M` metadata and uses a second-then-nanosecond strict `>` newer check; both correctly influence `--remove-source-files` (a skipped source is not removed). `-W/--whole-file` disables block-level delta (opt-in via `--delta`), folded into the wire `use_delta` so no protocol bump was needed, and makes `--fuzzy` inert; `--append`/`--append-verify` are rejected with `-W`. `--compress-threads=NUM` (1..64, client-only, never crosses the wire) sizes the zstd compression worker pool. No code was changed by this correction; the implementation had landed in earlier merge waves (feat/ignore-times, feat/ignore-existing via the newer `file_to_disk_secure_no_replace`/`linkat EEXIST` path, feat/size-only, feat/modify-window, feat/whole-file, feat/update, compression-threads).
 

src/client/client_cli.c

@@ -1106,6 +1106,11 @@ static bool cli_handle_table_option(CliParseCtx* ctx) {
         }
         config->use_metadata = true;
       }
+      /* Remember that --server-host was explicitly given (the field itself
+         defaults to 127.0.0.1, so a value check cannot distinguish it).  Used
+         by --dry-run to route an explicit remote target to the server. */
+      if (entry->offset == offsetof(Config, server_host))
+        config->server_host_set = true;
     }
   } else if (apply_table_option(config, entry, NULL) != 0) {
     ctx->exit_code = -1;
@@ -1389,6 +1394,7 @@ static int set_server_port_option(Config* config, const char* value, const char*
     return -1;
   }
   config->server_port = port;
+  config->server_port_set = true;
   return 0;
 }
 

src/client/client_send.c

@@ -497,6 +497,28 @@ static void disconnect_transfer_client(Client* client) {
   client_delete(client);
 }
 
+/* True when --dry-run should contact a receiver rather than running the
+ * client-side local manifest.  Any target a real run would reach over the wire
+ * selects the server-contacting path: a remote (SSH host:path), a daemon
+ * (host::module/path), an explicit --server-host, --server-port/--port, TLS, or
+ * a source-bind --address.  A plain local destination (none of these) keeps the
+ * original client-side behavior, which never dials the default 127.0.0.1:8080. */
+static bool dry_run_targets_server(const Config* config) {
+  if (!config)
+    return false;
+  if (config->transport == TRANSPORT_SSH)
+    return true;
+  if (config->module && config->module[0] != '\0')
+    return true;
+  if (config->server_host_set || config->server_port_set)
+    return true;
+  if (config->use_tls)
+    return true;
+  if (config->address != NULL)
+    return true;
+  return false;
+}
+
 static bool add_chunk_to_manifest(ArrayList* manifest, const Chunk* chunk) {
   if (!manifest)
     return true;
@@ -1048,6 +1070,19 @@ static int incremental_check(Client* client, File* file, const Config* config,
       *resume_offset = offset;
     return 3;
   }
+  /* Server-contacting --dry-run: the receiver decided the file is not up to
+     date and answered "would transfer" WITHOUT expecting any data.  Treat it as
+     the dry-run code ONLY when this session actually requested dry-run.  A
+     hostile/buggy peer that emits it outside dry-run is a protocol error: fail
+     closed (and send STATUS_ERROR) rather than fall through to the normal path,
+     which would transmit file data the receiver is not reading and desync. */
+  if (s == STATUS_DRY_RUN_TRANSFER) {
+    if (config->dry_run)
+      return 4;
+    log_message(LOG_LEVEL_ERROR, "Unexpected DRY_RUN_TRANSFER status outside a --dry-run session");
+    send_status(client->file_descriptor, STATUS_ERROR);
+    return -1;
+  }
   if (s != STATUS_NEXT) {
     log_server_rejection("Unexpected server status");
     send_status(client->file_descriptor, STATUS_ERROR);
@@ -1188,6 +1223,174 @@ static int send_append(const Client* client, File* file, Config* config,
   return ok ? 0 : -1;
 }
 
+/* Server-contacting --dry-run.  Connects to the configured remote/daemon and
+ * runs the normal per-file incremental decision WITHOUT transmitting any file
+ * data: the receiver (which also sees dry_run=true on the wire) answers
+ * STATUS_OK for an up-to-date file and STATUS_DRY_RUN_TRANSFER for a file it
+ * would otherwise write, mutating nothing on either side.  The would-transfer
+ * set and the same trailer as the local dry-run are printed.  A
+ * --compare-dest exact basis hit with no destination copy is reported as a
+ * skip by the receiver.
+ *
+ * Only regular files take the receiver-consulted check; directory / symlink /
+ * special / hard-link-sibling entries have no per-file content check, so they
+ * are reported conservatively as would-transfer and their frames are never
+ * sent (which is what keeps the receiver mutation-free).  --delete* is
+ * deliberately NOT transmitted in dry-run, so no deletion can occur; the
+ * would-delete manifest report is a documented follow-up.
+ *
+ * Returns 0 on success, 1 on error. */
+static int send_dry_run_remote(Config* config) {
+  int from_skipped = 0;
+  ArrayList* missing_args = NULL;
+  if (config->delete_missing_args) {
+    missing_args = array_list_create(free);
+    if (!missing_args)
+      return 1;
+  }
+  if (!files_from_list_check(config, missing_args, &from_skipped)) {
+    if (missing_args)
+      array_list_delete(missing_args);
+    return 1;
+  }
+  if (missing_args)
+    array_list_delete(missing_args);
+  /* Alternate basis dirs force the whole-file per-file check on the real
+     receiver; refuse an oversize source up front exactly as send_files does so
+     dry-run reports the same clear diagnostic instead of aborting mid-stream. */
+  if (config_has_basis(config) && !basis_oversize_preflight(config))
+    return 1;
+  /* Would-delete reporting requires a receiver-side read-only extras walk that
+     is not implemented yet; be explicit that --delete is a no-op in dry-run
+     rather than silently ignoring it. */
+  if ((config->use_delete || config->delete_missing_args) && !config->quiet)
+    log_message(LOG_LEVEL_WARNING,
+                "--dry-run: would-delete reporting is not available in this release; nothing is "
+                "deleted");
+
+  /* A live session may follow, so arm graceful abort handling. */
+  client_set_abort_armed(true);
+  Client* client = connect_transfer_client(config);
+  if (!client) {
+    if (config->transport == TRANSPORT_TCP)
+      log_message(LOG_LEVEL_ERROR, "could not connect to server%s",
+                  config->use_tls ? " via TLS" : "");
+    client_set_abort_armed(false);
+    return 1;
+  }
+  ProtocolSession session;
+  protocol_session_init(&session, client->file_descriptor, client->file_descriptor);
+  protocol_session_set_io_timeout(&session, config->timeout);
+  protocol_session_set_ssl(&session, (SSL*)client->ssl);
+  protocol_session_bind(&session);
+
+  int ret = 1;
+  PreparedScanner prepared;
+  memset(&prepared, 0, sizeof(prepared));
+  DirectoryScanner* scanner = NULL;
+  if (!config_send(client->file_descriptor, config))
+    goto dry_fail;
+  receive_daemon_motd(client, config);
+  if (!prepare_scanner(config, 0, &prepared))
+    goto dry_fail;
+  scanner = directory_scanner_create_with_options(config->send_directory, &prepared.options);
+  if (!scanner)
+    goto dry_fail;
+
+  int file_count = 0;
+  unsigned long long total_bytes = 0;
+  char size_buffer[32];
+  if (!config->quiet)
+    printf("Dry run: files to be transferred\n");
+  Chunk* chunk;
+  while ((chunk = directory_scanner_next(scanner)) != NULL) {
+    for (int i = 0; i < chunk->element_count; i++) {
+      File* f = chunk->items[i];
+      if (!f)
+        continue;
+      unsigned long long fsize = f->data ? f->data->size : 0;
+      bool would;
+      if (f->is_dir || f->is_symlink || f->is_special ||
+          (f->link_group != 0 && !f->link_first && f->hardlink_target != NULL)) {
+        /* No receiver-side content check exists for these frame types; a real
+           run would (re)create them, so report would-transfer and send no
+           frame (the receiver must stay mutation-free). */
+        would = true;
+      } else if (fsize > MAX_RECEIVE_WHOLE_FILE_SIZE && !config->use_incremental &&
+                 !config_has_basis(config)) {
+        /* A non-incremental run streams a >whole-file-limit source without the
+           STATUS_CHECK handshake, so no read-only receiver decision is possible
+           (and none is needed: a real run would transfer it). */
+        would = true;
+      } else {
+        DeltaSignature* sig = NULL;
+        unsigned long long resume_offset = 0;
+        int rc = incremental_check(client, f, config, &sig, &resume_offset);
+        delta_signature_destroy(sig);
+        if (rc < 0) {
+          chunk_destroy(chunk);
+          goto dry_fail;
+        }
+        if (rc == 1)
+          continue; /* up to date; nothing to report */
+        if (rc != 4) {
+          log_message(LOG_LEVEL_ERROR, "Unexpected receiver reply during dry-run");
+          chunk_destroy(chunk);
+          goto dry_fail;
+        }
+        would = true;
+      }
+      if (would) {
+        if (!config->quiet) {
+          char* escaped_path = output_escape(file_wire_path(f), config->eight_bit_output);
+          if (!escaped_path) {
+            chunk_destroy(chunk);
+            goto dry_fail;
+          }
+          if (config->human_readable)
+            printf("  %s (%s)\n", escaped_path,
+                   display_bytes(fsize, true, size_buffer, sizeof(size_buffer)));
+          else
+            printf("  %s (%llu bytes)\n", escaped_path, fsize);
+          free(escaped_path);
+        }
+        total_bytes += fsize;
+        file_count++;
+      }
+    }
+    chunk_destroy(chunk);
+  }
+  bool io_error = directory_scanner_had_io_error(scanner);
+  if (directory_scanner_failed(scanner))
+    goto dry_fail;
+  if (io_error)
+    log_message(LOG_LEVEL_WARNING, "source scan hit an unreadable directory");
+  /* Terminate the stream so the receiver emits its success frame; no data
+     frame and no delete manifest are ever sent in dry-run. */
+  if (!send_status(client->file_descriptor, STATUS_FINISHED))
+    goto dry_fail;
+  Status status;
+  if (!receive_status(client->file_descriptor, &status) || status != STATUS_OK)
+    goto dry_fail;
+  if (!config->quiet) {
+    if (config->human_readable)
+      printf("Total: %d files, %s\n", file_count,
+             display_bytes(total_bytes, true, size_buffer, sizeof(size_buffer)));
+    else
+      printf("Total: %d files, %.1f MB\n", file_count, (double)total_bytes / (double)BYTES_PER_MIB);
+  }
+  ret = io_error ? 1 : 0;
+
+dry_fail:
+  if (scanner)
+    directory_scanner_destroy(scanner);
+  prepared_scanner_destroy(&prepared);
+  disconnect_transfer_client(client);
+  protocol_session_unbind();
+  client_set_abort_armed(false);
+  return ret;
+}
+
 // Send a single file directly (non-incremental path).
 static bool send_file_direct(File* file, int fd, bool use_metadata, int compression_level,
                              const Config* config) {
@@ -1314,6 +1517,16 @@ static int send_single_file(Client* client, File* file, Config* config, bool use
       }
       return arc == 0 ? 0 : -1;
     }
+    // rc == 4: the receiver answered DRY_RUN_TRANSFER, which is only valid in
+    // incremental_check's dedicated dry-run consumer.  send_single_file never
+    // runs a dry-run session, so this is a protocol error: abort instead of
+    // falling through and sending data the receiver is not reading.
+    if (rc == 4) {
+      log_message(LOG_LEVEL_ERROR, "Receiver answered DRY_RUN_TRANSFER in a non-dry-run transfer");
+      delta_signature_destroy(sig);
+      send_status(client->file_descriptor, STATUS_ERROR);
+      return -1;
+    }
     // rc == 0: unchanged file, skip
     // rc == 2: server sent delta signature but sendfile doesn't support delta
     delta_signature_destroy(sig);
@@ -1355,6 +1568,14 @@ static int send_single_file(Client* client, File* file, Config* config, bool use
     }
     return arc == 0 ? 0 : -1;
   }
+  if (rc == 4) {
+    /* See the sendfile branch above: DRY_RUN_TRANSFER is only valid in the
+       dedicated dry-run consumer, never in the normal per-file send path. */
+    log_message(LOG_LEVEL_ERROR, "Receiver answered DRY_RUN_TRANSFER in a non-dry-run transfer");
+    delta_signature_destroy(sig);
+    send_status(client->file_descriptor, STATUS_ERROR);
+    return -1;
+  }
   if (rc == 2 && config->use_delta && !config->whole_file) {
     int drc = send_delta(client, file, sig, config);
     delta_signature_destroy(sig);
@@ -1956,7 +2177,8 @@ int send_files(Config* config) {
   if (config->list_only)
     return send_list_only(config);
   if (config->dry_run)
-    return send_dry_run_manifest(config);
+    return dry_run_targets_server(config) ? send_dry_run_remote(config)
+                                          : send_dry_run_manifest(config);
   ArrayList* missing_args = NULL;
   int skipped = 0;
   if (config->delete_missing_args) {
@@ -2268,7 +2490,8 @@ int send_files_multithreaded(Config** config_ptr) {
   if (config->list_only)
     return send_list_only(config);
   if (config->dry_run)
-    return send_dry_run_manifest(config);
+    return dry_run_targets_server(config) ? send_dry_run_remote(config)
+                                          : send_dry_run_manifest(config);
   ArrayList* missing_args = NULL;
   int skipped = 0;
   if (config->delete_missing_args) {

src/client/client_validation.c

@@ -22,6 +22,17 @@ bool validate_config(const Config* config) {
                 "--write-batch, --only-write-batch, and --read-batch are mutually exclusive");
     return false;
   }
+  /* A dry-run of a local batch apply is not meaningful: --read-batch bypasses
+     the client-side scan/server decision entirely, so dry-run would have no
+     wire state to report (and must not be used as a mutation escape hatch).
+     --only-write-batch likewise never contacts a receiver.  Reject both up
+     front instead of silently ignoring --dry-run. */
+  if (config->dry_run && (read_batch || only_write_batch)) {
+    log_message(LOG_LEVEL_ERROR,
+                "--dry-run cannot be combined with --read-batch or --only-write-batch; "
+                "a dry-run of a local batch apply is not meaningful");
+    return false;
+  }
   if (read_batch) {
     if (!config->receive_root_directory) {
       log_message(LOG_LEVEL_ERROR, "--read-batch requires a destination directory");

src/server/receiver.c

@@ -288,10 +288,19 @@ int receiver_process_pending(Config* config, int file_descriptor, const Receiver
       goto fail;
     }
     if (status == STATUS_CHECK) {
-      bool skipped;
-      File* file = receive_incremental_check(file_descriptor, config, &skipped);
-      if (!skipped && (!file || !sink->store_file(file, sink->context)))
+      bool skipped = false;
+      bool would_transfer = false;
+      File* file = receive_incremental_check_ex(file_descriptor, config, &skipped, &would_transfer);
+      if (config->dry_run) {
+        /* Server-contacting --dry-run: the reply has already been sent
+           (STATUS_OK = up to date, STATUS_DRY_RUN_TRANSFER = would transfer) and
+           nothing may be stored.  Both flags false means a genuine protocol
+           error (STATUS_ERROR already sent or sent by receive_error below). */
+        if (!skipped && !would_transfer)
           goto receive_error;
+      } else if (!skipped && (!file || !sink->store_file(file, sink->context))) {
+        goto receive_error;
+      }
     } else if (status == STATUS_CHUNK) {
       Chunk* chunk = receive_chunk_data(file_descriptor, config);
       if (!chunk || !receiver_process_chunk(chunk, sink))
@@ -323,6 +332,15 @@ int receiver_process_pending(Config* config, int file_descriptor, const Receiver
       DeleteManifest* manifest = receive_manifest_entries(file_descriptor);
       if (!manifest)
         goto fail; /* receive_manifest_entries already sent STATUS_ERROR */
+      if (config->dry_run) {
+        /* Server-contacting --dry-run mutates nothing, so a keep-set manifest
+           is consumed and discarded.  The early-delete mode still needs its ACK
+           so a sender blocked on the delete handshake is not left hanging. */
+        delete_manifest_free(manifest);
+        if (early_delete && !send_status(file_descriptor, STATUS_OK))
+          goto fail;
+        goto next_status;
+      }
       if (early_delete) {
         /* --delete-before / --delete-during: the manifest is authoritative the
            moment it arrives, before any file data.  Delete now and acknowledge
@@ -441,7 +459,11 @@ typedef struct {
 static bool receiver_save_file(File* file, void* context_pointer) {
   ReceiverSaveContext* context = context_pointer;
   FileSaveResult result = FILE_SAVE_ERROR;
-  if (!context->config->save_to_disk) {
+  if (context->config->dry_run) {
+    /* Defense in depth: a dry-run receiver mutates nothing even if a data
+       frame reaches the sink (the sender is not supposed to send one). */
+    result = FILE_SAVE_SKIPPED;
+  } else if (!context->config->save_to_disk) {
     /* Nothing is stored; report the file as not-written so a
        --remove-source-files sender keeps its source. */
     result = FILE_SAVE_SKIPPED;
@@ -457,8 +479,12 @@ static bool receiver_save_file(File* file, void* context_pointer) {
     file_destroy(file);
     return false;
   }
-  if (result != FILE_SAVE_ERROR && context->config->remove_source_files && !file->is_dir &&
-      !file->is_special && !file->skip &&
+  /* A dry-run receiver mutates nothing AND records no per-file outcomes: a
+     hostile dry-run client that streamed data frames anyway must not be able to
+     grow `outcomes` without bound (receiver_outcomes_append reallocs uncharged)
+     or force a per-frame ack. */
+  if (!context->config->dry_run && result != FILE_SAVE_ERROR &&
+      context->config->remove_source_files && !file->is_dir && !file->is_special && !file->skip &&
       !receiver_outcomes_append(&context->outcomes, (unsigned char)result)) {
     file_destroy(file);
     return false;
@@ -469,6 +495,10 @@ static bool receiver_save_file(File* file, void* context_pointer) {
 
 static bool receiver_send_success_frame(int fd, void* context_pointer) {
   ReceiverSaveContext* context = context_pointer;
+  /* Server-contacting --dry-run: nothing was staged or written, so there is
+     nothing to publish and no directory times to stamp. */
+  if (context->config->dry_run)
+    return receiver_send_final_success(fd, context->config, &context->outcomes);
   /* --delay-updates: the whole protocol stream (including manifest/delete
      handling, which ran inside receiver_process) has succeeded and every
      staged file was fully written.  Publish them atomically now, before the

src/server/receiver_pipeline.c

@@ -196,7 +196,11 @@ int write_thread(void* pipeline_context) {
     }
     size_t file_bytes = file->data ? file->data->size : 0;
     FileSaveResult result = FILE_SAVE_SKIPPED;
-    if (save_to_disk) {
+    /* Server-contacting --dry-run: never write.  The receiver thread does not
+       enqueue anything on the dry-run path, but this keeps the writer thread
+       provably mutation-free if a data frame ever reached it. */
+    bool dry_run = context->config->dry_run;
+    if (save_to_disk && !dry_run) {
       result = file_save_to_disk_full(root_directory, file, context->config);
       if (result == FILE_SAVE_ERROR) {
         file_destroy(file);
@@ -215,7 +219,7 @@ int write_thread(void* pipeline_context) {
     /* P7 Wave D: a directory's times are never applied inline (a later child
        write would clobber them); accumulate the metadata here and let the
        caller apply it once every writer has drained. */
-    if (result != FILE_SAVE_ERROR && file->is_dir && file->metadata &&
+    if (!dry_run && result != FILE_SAVE_ERROR && file->is_dir && file->metadata &&
         dir_times_should_capture(context->config) &&
         !dir_time_list_add(&context->dir_times, file->path, file->metadata)) {
       file_destroy(file);
@@ -234,8 +238,8 @@ int write_thread(void* pipeline_context) {
        which sources were actually written versus skipped on the receiver.
        Explicit directory entries and recreated device/special nodes have no
        source and are never acknowledged (mirrors receiver.c). */
-    if (context->config->remove_source_files && !file->is_dir && !file->is_special && !file->skip &&
-        !receiver_outcomes_append(&context->outcomes, (unsigned char)result)) {
+    if (!dry_run && context->config->remove_source_files && !file->is_dir && !file->is_special &&
+        !file->skip && !receiver_outcomes_append(&context->outcomes, (unsigned char)result)) {
       file_destroy(file);
       pipeline_context_receiver_note_bytes_released(context, file_bytes);
       mtx_lock(&context->mutex);

src/server/server.c

@@ -217,12 +217,24 @@ static bool path_is_within(const char* root, const char* path) {
    root is rejected up front instead of being silently invented by a later
    write.  Both paths are confined to the authorized root by the secure file
    helpers. */
+/* Existence-only half of the precondition: the destination root must already
+   resolve to a directory below the authorized root.  Never creates anything, so
+   a server-contacting --dry-run can apply the exact same fail-closed check a
+   real run would without mutating the tree. */
+static bool receive_root_exists(const Config* config) {
+  if (!config || !config->receive_root_directory)
+    return false;
+  return file_directory_exists_secure(config->receive_root_directory);
+}
+
+/* Full precondition for a real run: --mkpath creates the root (and missing
+   leading components), otherwise it must already exist as a directory. */
 static bool ensure_receive_root(const Config* config) {
   if (!config || !config->receive_root_directory)
     return false;
   if (config->mkpath)
     return file_ensure_directory_secure(config->receive_root_directory);
-  return file_directory_exists_secure(config->receive_root_directory);
+  return receive_root_exists(config);
 }
 
 static bool configure_authorization(const char* root) {
@@ -263,9 +275,11 @@ typedef enum {
 } ModuleAuthResult;
 
 /* Looks up the daemon module selected by the client's config frame and rejects
- * a `read only` one (every FastSync network transfer writes; there is no
- * read-only wire operation yet).  Returns the module, or NULL with *error set
- * to the caller-facing rejection message. */
+ * a `read only` one for a real write transfer.  A server-contacting --dry-run
+ * IS a read-only wire operation (it reports what would transfer/skip and
+ * mutates nothing), so a `read only` module is the safest possible dry-run
+ * target and is accepted.  Returns the module, or NULL with *error set to the
+ * caller-facing rejection message. */
 static const DaemonModule* module_gate_lookup_module(const Config* config, const char** error) {
   const DaemonModule* module = daemon_conf_find_module(g_daemon_conf, config->module);
   if (module == NULL) {
@@ -276,7 +290,7 @@ static const DaemonModule* module_gate_lookup_module(const Config* config, const
     *error = "requested daemon module does not exist";
     return NULL;
   }
-  if (module->read_only) {
+  if (module->read_only && !config->dry_run) {
     log_message(LOG_LEVEL_ERROR, "daemon module '%s' is read only; refusing write transfer",
                 config->module);
     *error = "requested daemon module is read only";
@@ -556,9 +570,10 @@ static const char* module_gate_install_root(const Config* config, const DaemonMo
  * becomes the authorized root via configure_authorization -- exactly the same
  * root confinement the standalone server applies to its single
  * --destination-root, but per-module and NEVER client-chosen.  The module is
- * refused (with a clear log) when it is unknown, when it is `read only` (every
- * FastSync network transfer writes; there is no read-only wire operation yet),
- * when it requests client-chosen ownership without the module's
+ * refused (with a clear log) when it is unknown, when it is `read only` for a
+ * real write transfer (a server-contacting --dry-run is a read-only wire
+ * operation and may target a `read only` module), when it requests
+ * client-chosen ownership without the module's
  * `client owner = yes` opt-in (P7 Wave E hardening), or when the presented
  * daemon credentials fail for a module that declares `auth users`.  Wave A
  * refused every auth-required module (auth was not yet implemented); Wave B
@@ -756,9 +771,14 @@ void handler(int file_descriptor) {
      skipped via its implied --ignore-missing-args, but nothing is deleted). */
   config->delete_missing_args = config->delete_missing_args && allow_delete;
   /* --mkpath: create the destination root (and its missing leading components)
-     before anything else; without it the root must pre-exist.  A failure here
-     aborts the connection cleanly before any file data is exchanged. */
-  if (!ensure_receive_root(config)) {
+   * before anything else; without it the root must pre-exist.  The precondition
+   * is UNCONDITIONAL: a server-contacting --dry-run must reject exactly the
+   * root a real session would reject, so a client cannot set the wire dry_run
+   * bit to relax it.  Dry-run only runs the existence/directory check (never
+   * --mkpath) so it creates nothing while still failing closed.  A failure here
+   * aborts the connection cleanly before any file data is exchanged. */
+  bool root_ok = config->dry_run ? receive_root_exists(config) : ensure_receive_root(config);
+  if (!root_ok) {
     char* escaped_root = output_escape(config->receive_root_directory, log_get_8_bit_output());
     log_message(LOG_LEVEL_ERROR, "destination root is not available: %s",
                 escaped_root ? escaped_root : "<allocation failed>");
@@ -767,8 +787,9 @@ void handler(int file_descriptor) {
   }
   /* A --delay-updates transfer stages under a private 0700 directory inside
      the receive root.  Create it up front (wiping leftovers of any previously
-     interrupted delayed transfer) so a fully-skipped run also starts clean. */
-  if (config->delay_updates) {
+     interrupted delayed transfer) so a fully-skipped run also starts clean.
+     A dry-run stages nothing, so the staging tree is never created. */
+  if (config->delay_updates && !config->dry_run) {
     config->delay_context = delay_updates_context_create(config->receive_root_directory);
     if (!config->delay_context || !delay_updates_prepare(config->delay_context)) {
       log_message(LOG_LEVEL_ERROR, "Failed to initialize --delay-updates staging area");
@@ -864,12 +885,13 @@ void handler(int file_descriptor) {
     thrd_join(receiver, &receiver_result);
     thrd_join(writer, &writer_result);
     bool transfer_ok = receiver_result == thrd_success && writer_result == thrd_success;
-    if (transfer_ok) {
+    if (transfer_ok && !config->dry_run) {
       /* Commit-style (late) deletion: receive_thread handed the keep-set
          manifest here instead of deleting while write_thread might still be
          draining, so by now every file is on disk and the whole transfer is
          known to have succeeded.  Remove the extras before publishing a
-         --delay-updates run; the walker skips the staging directory. */
+         --delay-updates run; the walker skips the staging directory.  A
+         server-contacting --dry-run deletes nothing (no manifest is sent). */
       if (context->deferred_manifest) {
         if (!manifest_delete_all(config, context->deferred_manifest)) {
           transfer_ok = false;
@@ -878,7 +900,7 @@ void handler(int file_descriptor) {
         context->deferred_manifest = NULL;
       }
     }
-    if (transfer_ok) {
+    if (transfer_ok && !config->dry_run) {
       /* --delay-updates: receive_thread has finished the whole protocol stream
          (including manifest/delete handling) and write_thread has drained its
          queue, so every staged file is complete.  Publish atomically before the

src/shared/config.c

@@ -21,7 +21,6 @@ static void config_set_defaults(Config* config) {
   config->scanner_threads = 0;
   config->metadata_explicitly_disabled = false;
   config->show_progress = false;
-  config->dry_run = false;
   config->compression_threads = 0;
   config->ssh_port = 22;
   config->transport = TRANSPORT_TCP;
@@ -42,6 +41,8 @@ static void config_set_defaults(Config* config) {
   config->tls_ca = NULL;
   config->server_host = str_dup("127.0.0.1");
   config->server_port = 8080;
+  config->server_port_set = false;
+  config->server_host_set = false;
   /* 0 means "--timeout not given": the transport keeps its own built-in 30 s
    * socket timeout (tcp_set_timeouts ignores non-positive values) and the
    * protocol layer keeps its built-in 60 s per-message deadline.  A positive
@@ -190,11 +191,11 @@ static bool validate_received_config(const Config* config) {
          valid_wire_bool(config->delay_updates) && valid_wire_bool(config->mkpath) &&
          valid_wire_bool(config->partial) && valid_wire_bool(config->delete_before) &&
          valid_wire_bool(config->checksum) && valid_wire_bool(config->eight_bit_output) &&
-         checksum_algo_valid(config->checksum_algo) && identity_wire_valid(config) &&
-         valid_wire_bool(config->preserve_atimes) && valid_wire_bool(config->preserve_crtimes) &&
-         valid_wire_bool(config->omit_dir_times) && valid_wire_bool(config->omit_link_times) &&
-         valid_wire_bool(config->munge_links) && valid_wire_bool(config->keep_dirlinks) &&
-         valid_wire_bool(config->fake_super) &&
+         valid_wire_bool(config->dry_run) && checksum_algo_valid(config->checksum_algo) &&
+         identity_wire_valid(config) && valid_wire_bool(config->preserve_atimes) &&
+         valid_wire_bool(config->preserve_crtimes) && valid_wire_bool(config->omit_dir_times) &&
+         valid_wire_bool(config->omit_link_times) && valid_wire_bool(config->munge_links) &&
+         valid_wire_bool(config->keep_dirlinks) && valid_wire_bool(config->fake_super) &&
          (!config->copy_as_set || (config->copy_as_uid >= 0 && config->copy_as_gid >= 0)) &&
          (!config->use_compression ||
           (config->compression_level >= 1 && config->compression_level <= 22)) &&

src/shared/config.h

@@ -109,6 +109,11 @@ typedef enum SuperMode { SUPER_MODE_AUTO = 0, SUPER_MODE_ON = 1, SUPER_MODE_OFF
  * =========================================================================== */
 #define CONFIG_WIRE_HEADER_FIELDS(X) X(version, char*, str_dup(PROTOCOL_VERSION), STR)
 
+/* dry_run (--dry-run) is CLIENT-INTENT that now CROSSES the wire (protocol
+ * 2.21.0): the receiver needs it to answer what WOULD transfer/skip without
+ * touching disk.  The client-only launch behavior (no server contact for a
+ * local destination) is decided separately in client_send.c before the frame
+ * is ever sent. */
 #define CONFIG_WIRE_CORE_FIELDS(X)                                                                 \
   X(eight_bit_output, bool, false, BOOL_8BIT)                                                      \
   X(max_alloc, unsigned long long, DEFAULT_MAX_ALLOC, RAW_MAXALLOC)                                \
@@ -122,7 +127,8 @@ typedef enum SuperMode { SUPER_MODE_AUTO = 0, SUPER_MODE_ON = 1, SUPER_MODE_OFF
   X(use_executability, bool, false, BOOL)                                                          \
   X(compression_level, int, 5, INT)                                                                \
   X(chunk_size, unsigned long long, DEFAULT_CHUNK_SIZE, RAW)                                       \
-  X(use_sendfile, bool, false, BOOL)
+  X(use_sendfile, bool, false, BOOL)                                                               \
+  X(dry_run, bool, false, BOOL)
 
 #define CONFIG_WIRE_DELTA_FIELDS(X)                                                                \
   X(use_delete, bool, false, BOOL)                                                                 \
@@ -261,7 +267,6 @@ typedef struct Config {
   int scanner_threads;
   bool metadata_explicitly_disabled;
   bool show_progress;
-  bool dry_run;
   int compression_threads;
   int ssh_port;
   TransportType transport;
@@ -281,6 +286,18 @@ typedef struct Config {
   bool use_tls;
   char* server_host;
   int server_port;
+  /* True when --server-port/--port was explicitly given.  CLIENT-ONLY (never
+   * serialized): --dry-run uses it to decide whether a real server handshake
+   * was requested, so a plain local destination (no explicit port) keeps the
+   * existing client-side dry-run behavior instead of dialing the default
+   * 127.0.0.1:8080. */
+  bool server_port_set;
+  /* True when --server-host was explicitly given.  CLIENT-ONLY (never
+   * serialized), and distinct from the "127.0.0.1" default: --dry-run uses it
+   * to route an explicit remote target to the server so it reports receiver
+   * state exactly like a real run, instead of silently running the client-side
+   * manifest. */
+  bool server_host_set;
   char* tls_cert;
   char* tls_key;
   char* tls_ca;
@@ -758,19 +775,35 @@ typedef struct Config {
  * mixed 2.19/2.20 deployment.  The chunk codec, which already used the packed
  * metadata_to_buf()/metadata_from_buf() form, is unchanged.
  *
- * Error-Detail Wave: 2.20.0 -> 2.21.0.
+ * Error-Detail + Server-contacting Dry-run Wave: 2.20.0 -> 2.21.0.
  *
- * WHY the bump, grounded in the wire: a server may now answer a rejected
- * operation with STATUS_ERROR_DETAIL followed by a bounded (<=
- * MAX_ERROR_DETAIL_BYTES) length-prefixed string instead of a bare
- * STATUS_ERROR (see protocol.h).  The config-frame LAYOUT is unchanged, but the
- * FRAME STREAM gains a new framed body after a status, so a 2.20 peer that does
- * not consume it would desynchronize on the following exchange.  The strict
- * same-version handshake (config_receive rejects a mismatched version before
- * parsing anything else) is what keeps a 2.21 client and a 2.20 server from ever
- * reaching that state.  receive_status() transparently maps STATUS_ERROR_DETAIL
- * back to STATUS_ERROR for every existing call site and captures the reason into
- * a thread-local buffer consulted via protocol_last_error(). */
+ * WHY the bump, grounded in the wire: this release combines two changes on the
+ * same lockstep version.
+ *
+ * (1) Error detail: a server may now answer a rejected operation with
+ * STATUS_ERROR_DETAIL followed by a bounded (<= MAX_ERROR_DETAIL_BYTES)
+ * length-prefixed string instead of a bare STATUS_ERROR (see protocol.h).  The
+ * config-frame LAYOUT is unchanged, but the FRAME STREAM gains a new framed
+ * body after a status, so a 2.20 peer that does not consume it would
+ * desynchronize on the following exchange.  receive_status() transparently maps
+ * STATUS_ERROR_DETAIL back to STATUS_ERROR for every existing call site and
+ * captures the reason into a thread-local buffer consulted via
+ * protocol_last_error().
+ *
+ * (2) --dry-run: --dry-run now contacts the receiver and reports exactly what
+ * WOULD change.  The binary config frame gains one serialized bool
+ * (Config->dry_run) appended to CONFIG_WIRE_CORE_FIELDS after use_sendfile, and
+ * the frame stream gains one terminal status (STATUS_DRY_RUN_TRANSFER) sent in
+ * reply to a per-file STATUS_CHECK when the file is not already up to date.
+ * The receiver performs the normal read-only incremental decision but no
+ * mutation; the sender then skips the data.
+ *
+ * Any config-frame layout or frame-sequence change must bump the protocol
+ * version: a 2.20 peer would desynchronize on the extra trailing byte, the
+ * unknown status, or the unconsumed detail body, and the strict same-version
+ * handshake (config_receive rejects a mismatched version before parsing
+ * anything else) is what keeps a 2.21 client and a 2.20 server from ever
+ * reaching that state. */
 #define PROTOCOL_VERSION "2.21.0"
 #define DEFAULT_CHUNK_SIZE (10 * 1024 * 1024)
 /* Upper bound on total basis-dir entries (rsync caps --link-dest at 20). */

src/shared/file_receive.c

@@ -569,6 +569,13 @@ static FileSaveResult file_save_write_device(const char* root_directory, const F
 
 FileSaveResult file_save_to_disk_full(const char* root_directory, const File* file,
                                       const Config* config) {
+  /* Central no-mutation guard: a server-contacting --dry-run (or a local batch
+     apply that somehow carries dry_run) must never touch the destination, no
+     matter which caller reached this primitive.  The per-caller guards remain,
+     but this is the last line of defense for every save path.  Report SKIPPED
+     so a --remove-source-files sender correctly keeps its source. */
+  if (config && config->dry_run)
+    return FILE_SAVE_SKIPPED;
   /* Backups are incompatible with ignore-existing: moving the entry first
      would make a concurrent no-replace commit overwrite its old name. */
   bool backup_enabled = config && config->backup && !config->ignore_existing;
@@ -1651,12 +1658,15 @@ static File* receive_full_file(int fd, const Config* config, const char* path) {
  * receive_incremental_check() decomposition.
  *
  * The per-file STATUS_CHECK fast path is split into the small helpers below,
- * called in order by a short linear orchestrator.  Each helper owns one
- * decision: request validation, secure destination open, metadata-only skip,
+ * called in order by a short linear orchestrator (receive_incremental_check_ex).
+ * Each helper owns one decision: request validation, secure destination open,
+ * metadata-only skip, server-contacting --dry-run no-mutation short-circuit,
  * alternate-basis match, --append tail resume, block delta, --fuzzy basis, and
  * the final "send the whole file" fallback.  Every protocol send/receive and
- * every resource cleanup is preserved exactly; the wire is byte-for-byte
- * unchanged.
+ * every resource cleanup is preserved exactly; the non-dry-run wire is
+ * byte-for-byte unchanged.  receive_incremental_check_ex additionally exposes a
+ * `would_transfer` out-param for the dry-run caller; the 3-arg
+ * receive_incremental_check wrapper passes NULL.
  * ------------------------------------------------------------------------- */
 
 /* Owned state threaded through the helpers below. */
@@ -1681,6 +1691,7 @@ typedef enum {
   INCREMENTAL_CONTINUE, /* proceed to the next helper */
   INCREMENTAL_ERROR,    /* protocol/validation failure: return NULL */
   INCREMENTAL_SKIP,     /* up to date: *skipped = true, return NULL */
+  INCREMENTAL_DRY_RUN,  /* --dry-run resolved: flags set, return NULL */
   INCREMENTAL_FILE,     /* a File* was produced (out_file) */
 } IncrementalCheckOutcome;
 
@@ -1845,6 +1856,42 @@ static IncrementalCheckOutcome incremental_check_quick_skip(IncrementalCheckStat
   return INCREMENTAL_CONTINUE;
 }
 
+/* Server-contacting --dry-run no-mutation short-circuit.  Runs after the
+   quick-skip decision and before any path that could touch the destination.
+   When dry_run is set and the file is not already up to date the receiver must
+   materialize nothing (no basis link/copy, no append/delta/full transfer) and
+   the sender must send no data, so answer STATUS_DRY_RUN_TRANSFER and stop.
+   The one exception is a --compare-dest exact hit with no destination copy: a
+   real run would suppress the data without changing the destination, so it
+   reports as a skip (STATUS_OK) exactly as the full basis path below would.
+   Everything read here (destination file, basis candidates) is read-only. */
+static IncrementalCheckOutcome incremental_check_dry_run_shortcut(IncrementalCheckState* state,
+                                                                  bool* skipped,
+                                                                  bool* would_transfer) {
+  const Config* config = state->config;
+  if (!config->dry_run)
+    return INCREMENTAL_CONTINUE;
+
+  bool skip_via_compare = false;
+  if (config_has_basis(config) && !config->ignore_times) {
+    BasisMatch basis;
+    basis_match_find(config, state->check_path, state->check_size, (time_t)state->check_mtime,
+                     (long)state->check_mtime_nsec, state->check_digest, state->check_digest_len,
+                     false, &basis);
+    if (basis.hit && basis.type == BASIS_DEST_COMPARE && !state->has_old_file)
+      skip_via_compare = true;
+    basis_match_free(&basis);
+  }
+  Status reply = skip_via_compare ? STATUS_OK : STATUS_DRY_RUN_TRANSFER;
+  if (!send_status(state->fd, reply))
+    return INCREMENTAL_ERROR;
+  if (skip_via_compare)
+    *skipped = true;
+  else if (would_transfer)
+    *would_transfer = true;
+  return INCREMENTAL_DRY_RUN;
+}
+
 /* Alternate basis directories (--compare-dest/--copy-dest/--link-dest): a hit
    either suppresses the transfer (compare-dest) or materializes the file from
    the basis without a data frame. */
@@ -2133,7 +2180,14 @@ static File* incremental_check_receive_full(IncrementalCheckState* state) {
   return receive_full_file(state->fd, state->config, state->check_path);
 }
 
-File* receive_incremental_check(int fd, const Config* config, bool* skipped) {
+/* Core implementation.  `would_transfer` (may be NULL) is set true only on the
+ * server-contacting --dry-run path, when the file is not up to date and the
+ * receiver answered STATUS_DRY_RUN_TRANSFER; the caller then knows no File is
+ * returned and nothing was stored. */
+File* receive_incremental_check_ex(int fd, const Config* config, bool* skipped,
+                                   bool* would_transfer) {
+  if (would_transfer)
+    *would_transfer = false;
   if (!config || !skipped) {
     send_status(fd, STATUS_ERROR);
     return NULL;
@@ -2163,6 +2217,13 @@ File* receive_incremental_check(int fd, const Config* config, bool* skipped) {
     goto done;
   }
 
+  /* Dry-run resolves here (no mutation) or falls through to the normal path. */
+  outcome = incremental_check_dry_run_shortcut(&state, skipped, would_transfer);
+  if (outcome == INCREMENTAL_ERROR)
+    goto done;
+  if (outcome != INCREMENTAL_CONTINUE)
+    goto done;
+
   outcome = incremental_check_try_basis(&state, &result);
   if (outcome == INCREMENTAL_ERROR)
     goto done;
@@ -2198,6 +2259,10 @@ done:
   return result;
 }
 
+File* receive_incremental_check(int fd, const Config* config, bool* skipped) {
+  return receive_incremental_check_ex(fd, config, skipped, NULL);
+}
+
 File* file_receive(const Config* config, int file_descriptor) {
   char* path = receive_wire_str(file_descriptor);
   if (path == NULL)
@@ -2909,6 +2974,11 @@ bool manifest_delete_missing_args(const Config* config, DeleteManifest* manifest
 bool manifest_delete_all(const Config* config, DeleteManifest* manifest) {
   if (!config || !manifest)
     return false;
+  /* Central no-mutation guard: a dry-run never deletes.  No manifest is sent on
+     the dry-run path, but a hostile/buggy peer could; treat it as a no-op so
+     the receiver can never remove anything. */
+  if (config->dry_run)
+    return true;
   if (config->delete_missing_args && !manifest_delete_missing_args(config, manifest))
     return false;
   if (config->use_delete && !manifest_delete_extras(config, manifest))

src/shared/file_receive.h

@@ -24,6 +24,13 @@ File* file_receive_symlink(int file_descriptor, const Config* config);
 File* file_receive_special(int file_descriptor);
 bool file_special_rdev_valid(int32_t major, int32_t minor, mode_t mode);
 File* receive_incremental_check(int fd, const Config* config, bool* skipped);
+/* Extended variant used by the receiver.  `would_transfer` (may be NULL) is set
+ * true only on the server-contacting --dry-run path when the file is not up to
+ * date: the receiver has already sent STATUS_DRY_RUN_TRANSFER and returns NULL
+ * without storing anything.  On that path `*skipped` is true for an up-to-date
+ * (STATUS_OK) file and both flags are false for a genuine error. */
+File* receive_incremental_check_ex(int fd, const Config* config, bool* skipped,
+                                   bool* would_transfer);
 
 /* P7 Wave D directory-time accumulator.  The receiver collects the metadata of
  * every directory it creates/receives (STATUS_MKDIR with metadata and/or the

src/shared/protocol.c

@@ -466,6 +466,8 @@ static const char* status_to_string(Status status) {
     return "AUTH_FAILED";
   case STATUS_ERROR_DETAIL:
     return "ERROR_DETAIL";
+  case STATUS_DRY_RUN_TRANSFER:
+    return "DRY_RUN_TRANSFER";
   default:
     return "UNKNOWN";
   }

src/shared/protocol.h

@@ -145,8 +145,17 @@ enum NET_STATUS {
    * of a bare STATUS_ERROR.  receive_status() consumes the string and maps the
    * status back to STATUS_ERROR, so every pre-2.21 call site keeps working;
    * callers that want the human-readable reason consult protocol_last_error().
-   * Appended last so the existing wire values never move. */
-  STATUS_ERROR_DETAIL
+   * Appended immediately after STATUS_AUTH_FAILED so the existing wire values
+   * never move. */
+  STATUS_ERROR_DETAIL,
+  /* Server-contacting --dry-run (protocol 2.21.0).  Sent by the receiver in
+   * response to a per-file STATUS_CHECK when the wire config carries
+   * dry_run=true and the file is NOT already up to date: it tells the sender
+   * the file WOULD be transferred, and the sender must NOT transmit any data
+   * (the receiver reads none in dry-run).  STATUS_OK keeps its meaning in this
+   * path ("already up to date / nothing to do").  Appended after
+   * STATUS_ERROR_DETAIL so no existing status is renumbered. */
+  STATUS_DRY_RUN_TRANSFER
 };
 
 void io_set_fds(int read_fd, int write_fd);

tests/integration/test_daemon.py

@@ -43,6 +43,9 @@ from common import (
     _find_free_port,
     _wait_for_port,
 )
+# The dry-run no-mutation contract is asserted with the same structural snapshot
+# (mode/inode/mtime/xattr/content) the feature suite uses.
+from test_features import _snapshot_tree
 
 SOURCE_DIR = os.path.join(TEST_DATA_DIR, "daemon_source")
 MODULE_ROOT = os.path.join(TEST_DATA_DIR, "daemon_modules")
@@ -355,6 +358,33 @@ class TestDaemonRejection:
         assert result.returncode != 0
         assert self._tree_files() == before, "read-only rejection wrote under the module root"
 
+    @pytest.mark.ci
+    def test_read_only_module_allows_dry_run(self, daemon):
+        """A server-contacting --dry-run IS a read-only wire operation, so a
+        `read only = yes` module is the safest dry-run target and must accept it
+        while writing nothing."""
+        result, _ = run_client(SOURCE_DIR, "127.0.0.1::readonly", flags=["--dry-run"],
+                               port=daemon.port)
+        assert result.returncode == 0, (result.stderr or result.stdout)[:300]
+        assert "Dry run:" in result.stdout, result.stdout[:200]
+        assert _tree_file_count(READONLY_MODULE) == 0, "read-only dry-run wrote a file"
+
+    @pytest.mark.ci
+    def test_module_dry_run_mutates_nothing(self, daemon):
+        """A daemon-module dry-run reports would-transfer entries but leaves the
+        module tree structurally identical (mode/inode/mtime/xattr/content)."""
+        result = _push("127.0.0.1::files", daemon.port)
+        assert result.returncode == 0, result.stderr or result.stdout
+        before = _snapshot_tree(FILES_MODULE)
+        # --ignore-times forces every regular file to be reported as
+        # would-transfer, so the dry-run exercises the receiver decision rather
+        # than an all-skip shortcut -- while still mutating nothing.
+        result, _ = run_client(SOURCE_DIR, "127.0.0.1::files",
+                               flags=["--dry-run", "--ignore-times"], port=daemon.port)
+        assert result.returncode == 0, (result.stderr or result.stdout)[:300]
+        assert "Dry run:" in result.stdout, result.stdout[:200]
+        assert _snapshot_tree(FILES_MODULE) == before, "daemon dry-run mutated the module root"
+
     def test_unknown_module_rejected(self, daemon):
         result = _push("127.0.0.1::no-such-module", daemon.port)
         assert result.returncode != 0

tests/integration/test_features.py

@@ -370,6 +370,353 @@ class TestDryRun:
         assert not mismatches, f"Mismatch: {mismatches}"
 
 
+def _snapshot_xattrs(path):
+    """Return a stable, comparable tuple of (name, value) xattr pairs.
+
+    Returns None when the platform/filesystem does not expose xattrs so both
+    snapshots agree on "unavailable" instead of one being treated as changed."""
+    try:
+        names = os.listxattr(path, follow_symlinks=False)
+    except (AttributeError, OSError):
+        return None
+    if not names:
+        return ()
+    pairs = []
+    for name in sorted(names):
+        try:
+            value = os.getxattr(path, name, follow_symlinks=False)
+        except OSError:
+            value = None
+        pairs.append((name, value))
+    return tuple(pairs)
+
+
+def _snapshot_tree(root):
+    """Return a structural snapshot of a directory tree.
+
+    Every entry (including directories) is recorded as
+    (inode, mtime_ns, mode, xattrs, kind-specific payload) so a dry-run that
+    touched a mode, inode, mtime, xattr, or content is observable.  Regular
+    files carry their size+bytes, symlinks their target, and special entries
+    (FIFO/socket/device) their size only -- opening a special file could block.
+    Returns an empty dict for a missing root so "nothing was created" is also
+    observable."""
+    snapshot = {}
+    if not os.path.exists(root):
+        return snapshot
+    for dirpath, dirnames, filenames in os.walk(root):
+        for name in list(dirnames) + filenames:
+            path = os.path.join(dirpath, name)
+            rel = os.path.relpath(path, root)
+            st = os.lstat(path)
+            entry = [st.st_ino, st.st_mtime_ns, stat.S_IMODE(st.st_mode), _snapshot_xattrs(path)]
+            if stat.S_ISLNK(st.st_mode):
+                entry.append(("symlink", os.readlink(path)))
+            elif stat.S_ISREG(st.st_mode):
+                with open(path, "rb") as fh:
+                    data = fh.read()
+                entry += [st.st_size, data]
+            else:
+                entry.append(st.st_size)
+            snapshot[rel] = tuple(entry)
+    return snapshot
+
+
+class TestRemoteDryRun:
+    """Server-contacting --dry-run (protocol 2.21.0): contacts the receiver,
+    reports what WOULD transfer/skip based on receiver state, and mutates
+    nothing on either side."""
+
+    def _seed(self, source):
+        clean_dir(source)
+        os.makedirs(os.path.join(source, "nested"), exist_ok=True)
+        with open(os.path.join(source, "keep.txt"), "wb") as f:
+            f.write(b"unchanged content\n")
+        with open(os.path.join(source, "changed.txt"), "wb") as f:
+            f.write(b"original content\n")
+        with open(os.path.join(source, "nested", "deep.txt"), "wb") as f:
+            f.write(b"deep file\n")
+
+    @pytest.mark.ci
+    def test_remote_dry_run_reports_changes_and_mutates_nothing(self, shared_server):
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_src")
+        dest = os.path.join(TEST_DATA_DIR, "remote_dry_dst")
+        self._seed(source)
+        clean_dir(dest)
+
+        # Populate the destination with a real transfer, then make exactly one
+        # file differ (content+size) and add a brand-new file.
+        result, _ = run_client(source, dest, port=shared_server.port)
+        assert result.returncode == 0, f"seed transfer failed: {result.stderr[:200]}"
+        received = get_dest_received_dir(dest, source)
+
+        with open(os.path.join(source, "changed.txt"), "wb") as f:
+            f.write(b"a much longer replacement payload\n")
+        with open(os.path.join(source, "added.txt"), "wb") as f:
+            f.write(b"newly added\n")
+
+        before = _snapshot_tree(received)
+        # --checksum makes the up-to-date decision content-based (the seed
+        # transfer did not preserve mtimes), so keep.txt/deep.txt report skip.
+        result, _ = run_client(source, dest, flags=["--dry-run", "--checksum"],
+                               port=shared_server.port)
+        assert result.returncode == 0, f"remote dry-run failed: {result.stderr[:300]}"
+        assert "Dry run:" in result.stdout, result.stdout[:200]
+        assert "changed.txt" in result.stdout, result.stdout
+        assert "added.txt" in result.stdout, result.stdout
+        assert "keep.txt" not in result.stdout, (
+            f"up-to-date file must not be reported as would-transfer: {result.stdout}"
+        )
+        assert "deep.txt" not in result.stdout, result.stdout
+        assert _snapshot_tree(received) == before, "remote dry-run mutated the destination"
+
+    @pytest.mark.ci
+    def test_remote_dry_run_into_empty_dest_creates_nothing(self, shared_server):
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_empty_src")
+        dest = os.path.join(TEST_DATA_DIR, "remote_dry_empty_dst")
+        self._seed(source)
+        clean_dir(dest)
+        received = get_dest_received_dir(dest, source)
+        assert not os.path.exists(received)
+
+        result, _ = run_client(source, dest, flags=["--dry-run"], port=shared_server.port)
+        assert result.returncode == 0, f"exit {result.returncode}: {result.stderr[:300]}"
+        assert "keep.txt" in result.stdout
+        assert "changed.txt" in result.stdout
+        assert "deep.txt" in result.stdout
+        # Nowhere may the receiver have created the destination mirror.
+        assert not os.path.exists(received), "dry-run created directories on the receiver"
+        assert _snapshot_tree(received) == {}
+
+    @pytest.mark.ci
+    def test_remote_dry_run_mkpath_does_not_create_root(self, shared_server):
+        """A wire dry_run cannot make --mkpath create anything, and it cannot
+        relax the precondition either: a nonexistent root is rejected (a real
+        run without the created root is impossible in dry-run) while nothing is
+        created."""
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_mk_src")
+        dest = os.path.join(TEST_DATA_DIR, "remote_dry_mk_dst")
+        self._seed(source)
+        shutil.rmtree(dest, ignore_errors=True)
+        assert not os.path.exists(dest)
+
+        result, _ = run_client(source, dest, flags=["--dry-run", "--mkpath"],
+                               port=shared_server.port)
+        assert result.returncode != 0, "dry-run --mkpath accepted a nonexistent receive root"
+        assert not os.path.exists(dest), "dry-run --mkpath created the destination root"
+
+    @pytest.mark.ci
+    def test_remote_dry_run_with_delete_does_not_delete(self, shared_server):
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_del_src")
+        dest = os.path.join(TEST_DATA_DIR, "remote_dry_del_dst")
+        self._seed(source)
+        clean_dir(dest)
+        result, _ = run_client(source, dest, port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:200]
+        received = get_dest_received_dir(dest, source)
+        extra = os.path.join(received, "extra.txt")
+        with open(extra, "wb") as f:
+            f.write(b"must survive a dry-run delete\n")
+        before = _snapshot_tree(received)
+
+        for flags in (["--dry-run", "--delete"], ["--dry-run", "--delete-after"]):
+            result, _ = run_client(source, dest, flags=flags, port=shared_server.port)
+            assert result.returncode == 0, f"{flags}: {result.stderr[:300]}"
+            assert os.path.exists(extra), f"{flags} deleted an extra in dry-run"
+            assert _snapshot_tree(received) == before, f"{flags} mutated the destination"
+
+    @pytest.mark.ci
+    def test_remote_dry_run_quiet_is_silent(self, shared_server):
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_quiet_src")
+        dest = os.path.join(TEST_DATA_DIR, "remote_dry_quiet_dst")
+        self._seed(source)
+        clean_dir(dest)
+        result, _ = run_client(source, dest, flags=["-q", "--dry-run"], port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:300]
+        assert result.stdout == ""
+        assert result.stderr == ""
+
+    @pytest.mark.ci
+    def test_remote_dry_run_threaded_routes_to_server(self, shared_server):
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_mt_src")
+        dest = os.path.join(TEST_DATA_DIR, "remote_dry_mt_dst")
+        self._seed(source)
+        clean_dir(dest)
+        result, _ = run_client(source, dest, flags=["--dry-run", "--threads"],
+                               port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:300]
+        assert "changed.txt" in result.stdout
+        assert _snapshot_tree(get_dest_received_dir(dest, source)) == {}
+
+    @pytest.mark.ci
+    def test_normal_transfer_unaffected_by_dry_run(self, shared_server):
+        """A real transfer after dry-run still installs the changes."""
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_normal_src")
+        dest = os.path.join(TEST_DATA_DIR, "remote_dry_normal_dst")
+        self._seed(source)
+        clean_dir(dest)
+        run_client(source, dest, port=shared_server.port)
+        received = get_dest_received_dir(dest, source)
+        with open(os.path.join(source, "changed.txt"), "wb") as f:
+            f.write(b"updated payload for the real transfer\n")
+        run_client(source, dest, flags=["--dry-run"], port=shared_server.port)
+
+        result, _ = run_client(source, dest, port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:200]
+        with open(os.path.join(received, "changed.txt"), "rb") as f:
+            assert f.read() == b"updated payload for the real transfer\n"
+
+    @pytest.mark.ci
+    def test_remote_dry_run_delay_updates_mutates_nothing(self, shared_server):
+        """--delay-updates stages under the receive root; a dry-run must neither
+        create that staging tree nor publish anything (mode/inode/mtime intact)."""
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_delay_src")
+        dest = os.path.join(TEST_DATA_DIR, "remote_dry_delay_dst")
+        self._seed(source)
+        clean_dir(dest)
+        result, _ = run_client(source, dest, flags=["--delay-updates"], port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:200]
+
+        with open(os.path.join(source, "changed.txt"), "wb") as f:
+            f.write(b"changed for delay-updates dry-run\n")
+        before = _snapshot_tree(dest)
+        result, _ = run_client(source, dest, flags=["--dry-run", "--delay-updates"],
+                               port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:300]
+        assert "changed.txt" in result.stdout, result.stdout
+        assert _snapshot_tree(dest) == before, "delay-updates dry-run mutated the destination"
+
+    @pytest.mark.ci
+    def test_remote_dry_run_backup_mutates_nothing(self, shared_server):
+        """--backup would rename the old file aside; a dry-run must not."""
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_backup_src")
+        dest = os.path.join(TEST_DATA_DIR, "remote_dry_backup_dst")
+        self._seed(source)
+        clean_dir(dest)
+        result, _ = run_client(source, dest, port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:200]
+
+        with open(os.path.join(source, "changed.txt"), "wb") as f:
+            f.write(b"changed for backup dry-run\n")
+        before = _snapshot_tree(dest)
+        result, _ = run_client(source, dest, flags=["--dry-run", "--backup"],
+                               port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:300]
+        assert "changed.txt" in result.stdout, result.stdout
+        assert _snapshot_tree(dest) == before, "--backup dry-run mutated the destination"
+
+    @pytest.mark.ci
+    def test_remote_dry_run_symlink_mutates_nothing(self, shared_server):
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_symlink_src")
+        dest = os.path.join(TEST_DATA_DIR, "remote_dry_symlink_dst")
+        self._seed(source)
+        os.symlink("changed.txt", os.path.join(source, "link"))
+        clean_dir(dest)
+        result, _ = run_client(source, dest, flags=["-a"], port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:200]
+        received = get_dest_received_dir(dest, source)
+        assert os.path.islink(os.path.join(received, "link"))
+
+        # Re-point the source link so the entry is genuinely stale, then prove a
+        # dry-run leaves the destination link target, inode, and mtime untouched.
+        os.unlink(os.path.join(source, "link"))
+        os.symlink("keep.txt", os.path.join(source, "link"))
+        before = _snapshot_tree(dest)
+        result, _ = run_client(source, dest, flags=["-a", "--dry-run"], port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:300]
+        assert _snapshot_tree(dest) == before, "symlink dry-run mutated the destination"
+        assert os.readlink(os.path.join(received, "link")) == "changed.txt"
+
+    @pytest.mark.ci
+    def test_remote_dry_run_hardlink_mutates_nothing(self, shared_server):
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_hardlink_src")
+        dest = os.path.join(TEST_DATA_DIR, "remote_dry_hardlink_dst")
+        clean_dir(source)
+        clean_dir(dest)
+        with open(os.path.join(source, "h1.txt"), "wb") as f:
+            f.write(b"hardlinked payload\n")
+        os.link(os.path.join(source, "h1.txt"), os.path.join(source, "h2.txt"))
+        result, _ = run_client(source, dest, flags=["-H"], port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:200]
+        received = get_dest_received_dir(dest, source)
+        assert os.stat(os.path.join(received, "h1.txt")).st_ino == \
+            os.stat(os.path.join(received, "h2.txt")).st_ino
+
+        # Change the shared inode; both names are now stale in the destination.
+        with open(os.path.join(source, "h1.txt"), "wb") as f:
+            f.write(b"changed hardlinked payload\n")
+        before = _snapshot_tree(dest)
+        result, _ = run_client(source, dest, flags=["-H", "--dry-run"], port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:300]
+        assert _snapshot_tree(dest) == before, "hardlink dry-run mutated the destination"
+
+    @pytest.mark.ci
+    def test_remote_dry_run_fifo_special_mutates_nothing(self, shared_server):
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_fifo_src")
+        dest = os.path.join(TEST_DATA_DIR, "remote_dry_fifo_dst")
+        clean_dir(source)
+        clean_dir(dest)
+        with open(os.path.join(source, "plain.txt"), "wb") as f:
+            f.write(b"plain\n")
+        os.mkfifo(os.path.join(source, "existing.fifo"))
+        result, _ = run_client(source, dest, flags=["--specials"], port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:200]
+        received = get_dest_received_dir(dest, source)
+        assert stat.S_ISFIFO(os.lstat(os.path.join(received, "existing.fifo")).st_mode)
+
+        os.mkfifo(os.path.join(source, "new.fifo"))
+        before = _snapshot_tree(dest)
+        result, _ = run_client(source, dest, flags=["--specials", "--dry-run"],
+                               port=shared_server.port)
+        assert result.returncode == 0, result.stderr[:300]
+        assert not os.path.exists(os.path.join(received, "new.fifo")), \
+            "dry-run created a FIFO on the receiver"
+        assert _snapshot_tree(dest) == before, "special-node dry-run mutated the destination"
+
+    @pytest.mark.ci
+    def test_read_batch_with_dry_run_is_refused(self, shared_server):
+        """A dry-run of a local batch apply is meaningless (and must not become a
+        mutation escape hatch): the CLI rejects the combination up front."""
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_batch_src")
+        dest = os.path.join(TEST_DATA_DIR, "remote_dry_batch_dst")
+        self._seed(source)
+        clean_dir(dest)
+        result, _ = run_client(source, dest, flags=["--read-batch=/nonexistent.batch", "--dry-run"],
+                               port=shared_server.port)
+        assert result.returncode != 0, "read-batch + dry-run was accepted"
+        combined = (result.stderr or "") + (result.stdout or "")
+        assert "cannot be combined" in combined or "--dry-run" in combined, combined[:300]
+
+    @pytest.mark.ci
+    def test_remote_dry_run_bad_root_fails_like_real_run(self, shared_server):
+        """A wire dry_run must not relax the destination-root precondition: a
+        missing or non-directory root that fails a real run fails a dry-run too,
+        and the dry-run must not create/replace anything."""
+        source = os.path.join(TEST_DATA_DIR, "remote_dry_badroot_src")
+        self._seed(source)
+
+        missing = os.path.join(TEST_DATA_DIR, "remote_dry_badroot_missing")
+        shutil.rmtree(missing, ignore_errors=True)
+        real, _ = run_client(source, missing, port=shared_server.port)
+        assert real.returncode != 0, "real run accepted a missing receive root"
+        assert not os.path.exists(missing), "real run created the missing root"
+        dry, _ = run_client(source, missing, flags=["--dry-run"], port=shared_server.port)
+        assert dry.returncode != 0, "dry-run accepted a missing receive root a real run rejects"
+        assert not os.path.exists(missing), "dry-run created the missing receive root"
+
+        fileroot = os.path.join(TEST_DATA_DIR, "remote_dry_badroot_file")
+        shutil.rmtree(fileroot, ignore_errors=True)
+        with open(fileroot, "wb") as f:
+            f.write(b"i am a regular file, not a directory\n")
+        real, _ = run_client(source, fileroot, port=shared_server.port)
+        assert real.returncode != 0, "real run accepted a regular-file receive root"
+        dry, _ = run_client(source, fileroot, flags=["--dry-run"], port=shared_server.port)
+        assert dry.returncode != 0, "dry-run accepted a regular-file receive root a real run rejects"
+        with open(fileroot, "rb") as f:
+            assert f.read() == b"i am a regular file, not a directory\n", \
+                "dry-run clobbered a regular-file receive root"
+
+
 class TestRemoveSourceFiles:
     def test_removes_only_transferred_regular_files(self, shared_server):
         source = os.path.join(TEST_DATA_DIR, "remove_source")

tests/integration/test_preflight.py

@@ -118,7 +118,7 @@ class TestProtocol:
         shutil.rmtree(dest, ignore_errors=True)
         os.makedirs(dest)
         _seed_protocol_source(source)
-        for bad in ("2.19.0", "2.18.0", "2.17.0", "2.15.0", "2.16.0", "216", "31"):
+        for bad in ("2.20.0", "2.19.0", "2.18.0", "2.17.0", "2.15.0", "2.16.0", "216", "31"):
             result, _ = run_client(source, dest, flags=[f"--protocol={bad}"],
                                    port=shared_server.port)
             assert result.returncode != 0, f"--protocol={bad} should be rejected"

tests/test_client_cli.c

@@ -590,6 +590,9 @@ static void test_parse_args_port_alias() {
   int positional_count = 0;
   EXPECT_EQ_INT(parse_args(cfg, 5, argv_space, positional_args, &positional_count), 0);
   EXPECT_EQ_INT(cfg->server_port, 9000);
+  /* The default port is 8080; the explicit bit is what lets --dry-run tell an
+     explicit remote target from the default and route to the server. */
+  EXPECT_TRUE(cfg->server_port_set);
   config_delete(cfg);
 
   cfg = config_create();
@@ -597,6 +600,7 @@ static void test_parse_args_port_alias() {
   positional_count = 0;
   EXPECT_EQ_INT(parse_args(cfg, 4, argv_inline, positional_args, &positional_count), 0);
   EXPECT_EQ_INT(cfg->server_port, 9001);
+  EXPECT_TRUE(cfg->server_port_set);
   config_delete(cfg);
 
   cfg = config_create();
@@ -604,6 +608,29 @@ static void test_parse_args_port_alias() {
   positional_count = 0;
   EXPECT_EQ_INT(parse_args(cfg, 4, argv_long, positional_args, &positional_count), 0);
   EXPECT_EQ_INT(cfg->server_port, 9002);
+  EXPECT_TRUE(cfg->server_port_set);
+  config_delete(cfg);
+}
+
+/* An explicit --server-host must set its own routing bit (the field itself
+ * defaults to 127.0.0.1, so a value check cannot distinguish an explicit host
+ * from the default); --dry-run uses it to route to the server. */
+static void test_parse_args_server_host_sets_routing_bit() {
+  Config* cfg = config_create();
+  int positional_args[2];
+  int positional_count = 0;
+  EXPECT_FALSE(cfg->server_host_set);
+  char* argv_space[] = {"fastsync", "--server-host", "example.test", "/src", "/dst"};
+  EXPECT_EQ_INT(parse_args(cfg, 5, argv_space, positional_args, &positional_count), 0);
+  EXPECT_EQ_STR(cfg->server_host, "example.test");
+  EXPECT_TRUE(cfg->server_host_set);
+  config_delete(cfg);
+
+  cfg = config_create();
+  char* argv_inline[] = {"fastsync", "--server-host=example.test", "/src", "/dst"};
+  positional_count = 0;
+  EXPECT_EQ_INT(parse_args(cfg, 4, argv_inline, positional_args, &positional_count), 0);
+  EXPECT_TRUE(cfg->server_host_set);
   config_delete(cfg);
 }
 
@@ -3301,6 +3328,7 @@ void test_client_cli() {
   test_parse_args_non_numeric_port();
   test_parse_args_invalid_server_port();
   test_parse_args_port_alias();
+  test_parse_args_server_host_sets_routing_bit();
   test_parse_args_threads();
   test_client_abort_flag();
   test_parse_args_invalid_compression_level();

tests/test_config.c

@@ -2347,6 +2347,7 @@ static void golden_config_populate(Config* c) {
   c->compression_level = 7;
   c->chunk_size = 65536;
   c->use_sendfile = false;
+  c->dry_run = true;
   c->use_delete = true;
   c->use_incremental = true;
   c->size_only = false;
@@ -2398,7 +2399,7 @@ static void golden_config_populate(Config* c) {
   c->modify_window = 3;
   c->compress_choice = str_dup("zstd");
   /* "u=rwx,go=rx" is the same 11 bytes as the original "u=rwX,go=rX" (so the
-   * frame stays 633 bytes) but X is not in FastSync's chmod grammar, and the
+   * frame stays 637 bytes) but X is not in FastSync's chmod grammar, and the
    * receive-side golden validates the frame. */
   c->chmod_spec = str_dup("u=rwx,go=rx");
   c->skip_compress_set = true;
@@ -2445,9 +2446,11 @@ static void golden_config_populate(Config* c) {
 
 /* The pinned golden frame (protocol 2.21.0).  The values below are the only
  * thing that ties the generated table to the historical wire format; update
- * them ONLY with a PROTOCOL_VERSION bump and a documented reason. */
-#define GOLDEN_WIRE_LEN 633
-#define GOLDEN_WIRE_HASH 7591559741712449854ULL
+ * them ONLY with a PROTOCOL_VERSION bump and a documented reason.  The combined
+ * 2.21.0 wave appends the serialized dry_run bool to CONFIG_WIRE_CORE_FIELDS
+ * and keeps the protocol version string at 2.21.0. */
+#define GOLDEN_WIRE_LEN 637
+#define GOLDEN_WIRE_HASH 13228626061067899189ULL
 
 static unsigned long long fnv1a_64(const unsigned char* buf, size_t len) {
   unsigned long long h = 1469598103934665603ULL;

tests/test_server.c

@@ -6,6 +6,7 @@
 #include "protocol.h"
 #include "test_utils.h"
 #include "utils.h"
+#include <dirent.h>
 #include <fcntl.h>
 #include <stdio.h>
 #include <stdlib.h>
@@ -376,6 +377,88 @@ static void test_incremental_check_size_mismatch_full_transfer() {
   }
 }
 
+/* Server-contacting --dry-run: with the wire config's dry_run set, a file that
+   is NOT up to date makes the receiver answer STATUS_DRY_RUN_TRANSFER and
+   return immediately; no data body is read and the destination file is left
+   byte-for-byte unchanged (no temp file, no write, no rename). */
+static void test_incremental_check_dry_run_reports_transfer_without_writing() {
+  Config* cfg = config_create();
+  EXPECT_NOT_NULL(cfg);
+  cfg->dry_run = true;
+  char* root = make_check_root("dryw");
+  EXPECT_NOT_NULL(root);
+  cfg->receive_root_directory = str_dup(root);
+  write_check_file(root, "file.txt", "0123456789abcdef");
+
+  char path[1024];
+  snprintf(path, sizeof(path), "%s/file.txt", root);
+  struct stat st;
+  EXPECT_EQ_INT(stat(path, &st), 0);
+
+  int p[2];
+  EXPECT_EQ_INT(socketpair(AF_UNIX, SOCK_STREAM, 0, p), 0);
+  io_set_fds(p[0], p[1]);
+  io_set_bwlimit(0);
+
+  pid_t pid = fork();
+  if (pid == 0) {
+    alarm(30);
+    close(p[1]);
+    io_set_fds(p[0], p[0]);
+    bool skipped = false;
+    bool would_transfer = false;
+    File* file = receive_incremental_check_ex(p[0], cfg, &skipped, &would_transfer);
+    bool ok = file == NULL && !skipped && would_transfer;
+    file_destroy(file);
+    config_delete(cfg);
+    close(p[0]);
+    _exit(ok ? 0 : 1);
+  } else {
+    close(p[0]);
+    io_set_fds(p[1], p[1]);
+    EXPECT_TRUE(send_str(p[1], "file.txt"));
+    unsigned long long size = (unsigned long long)st.st_size + 1;
+    long long mtime = (long long)st.st_mtime;
+    long long mtime_nsec = 0;
+#ifdef __linux__
+    mtime_nsec = (long long)st.st_mtim.tv_nsec;
+#endif
+    EXPECT_TRUE(send_n_data(p[1], &size, sizeof(size)));
+    EXPECT_TRUE(send_n_data(p[1], &mtime, sizeof(mtime)));
+    EXPECT_TRUE(send_n_data(p[1], &mtime_nsec, sizeof(mtime_nsec)));
+    Status s;
+    EXPECT_TRUE(receive_status(p[1], &s));
+    EXPECT_EQ_INT(s, STATUS_DRY_RUN_TRANSFER);
+
+    int status;
+    waitpid(pid, &status, 0);
+    close(p[1]);
+    config_delete(cfg);
+    /* The destination file must be untouched and no temp sibling may appear. */
+    char buf[32] = {0};
+    int fd = open(path, O_RDONLY);
+    EXPECT_TRUE(fd >= 0);
+    ssize_t got = read(fd, buf, sizeof(buf) - 1);
+    EXPECT_EQ_INT((int)got, 16);
+    EXPECT_EQ_STR(buf, "0123456789abcdef");
+    close(fd);
+    DIR* d = opendir(root);
+    EXPECT_NOT_NULL(d);
+    int entries = 0;
+    const struct dirent* e;
+    while ((e = readdir(d)) != NULL) {
+      if (strcmp(e->d_name, ".") != 0 && strcmp(e->d_name, "..") != 0)
+        entries++;
+    }
+    closedir(d);
+    EXPECT_EQ_INT(entries, 1);
+    unlink(path);
+    rmdir(root);
+    free(root);
+    EXPECT_TRUE(WIFEXITED(status) && WEXITSTATUS(status) == 0);
+  }
+}
+
 /* Issue #256: when a received delta claims a result above the whole-file cap,
    receive_delta_file must mark the operation failed so the caller aborts with
    STATUS_ERROR instead of emitting STATUS_NEXT and waiting for a body that
@@ -771,6 +854,7 @@ void test_server() {
     test_receive_incremental_check_rejects_invalid_nanoseconds();
     test_incremental_check_quick_skip_by_mtime();
     test_incremental_check_size_mismatch_full_transfer();
+    test_incremental_check_dry_run_reports_transfer_without_writing();
     test_incremental_check_delta_oversize_reports_failure();
     test_late_manifest_abort_frees_keepset();
     test_late_manifest_eof_frees_keepset();